Viliam Zaloga
Sumy State University, Ukraine
Doctor of technical sciences, Professor
Department of Manufacturing Engineering, Machines and Tools
Scopus profile: link
ID ORCID: https://orcid.org/0000-0001-7444-485X
Selected Publications:
1. Zaloga, V., Dyadyura, K., Rybalka, I., Pandova, I., Zaborowski, T. (2020). Enhancing Efficiency by Implementation of Integrated Management System in Order to Align Organisational Culture and Daily Practice. Management Systems in Production Engineering, 28 (4), 304–311. doi: http://doi.org/10.2478/mspe-2020-0043
2. Ivanov, V., Pavlenko, I., Zaloga, V., Liaposhchenko, O., Pirogov, D. (2020). Technological Features of Locating Charts in Fixture Design. Lecture Notes in Networks and Systems, 66–74. doi: http://doi.org/10.1007/978-3-030-46817-0_7
3. Denysenko, Y., Kysylevska, A., Panchenko, O., Zaloga, V., Dynnyk, O. (2020). Decision-Making Based on Prediction of Oil Quality Indicators in the Enterprise’s Information System. Advanced Manufacturing Processes, 25–31. doi: http://doi.org/10.1007/978-3-030-40724-7_3
4. Ivchenko, O., Zhyhylii, D., Zaloha, O., Zaloga, V., Dehtiarenko, O. (2020). Resolution of the Friction Coefficient of Adhesion Under Cutting. Advanced Manufacturing Processes, 98–107. doi: http://doi.org/10.1007/978-3-030-40724-7_10
5. Zaloga, V., Dyadyura, K., Rybalka, I., Pandova, I. (2019). Implementation of Integrated Management System in Order to Enhance Equipment Efficiency. Management Systems in Production Engineering, 27 (4), 221–226. doi: http://doi.org/10.1515/mspe-2019-0035
6. Ivanov, V., Dehtiarov, I., Pavlenko, I., Liaposhchenko, O., Zaloga, V. (2019). Parametric Optimization of Fixtures for Multiaxis Machining of Parts. Advances in Manufacturing II, 335–347. doi: http://doi.org/10.1007/978-3-030-18789-7_28
7. Denysenko, Y., Dynnyk, O., Yashyna, T., Malovana, N., Zaloga, V. (2018). Implementation of CALS-Technologies in Quality Management of Product Life Cycle Processes. Advances in Design, Simulation and Manufacturing, 3–12. doi: http://doi.org/10.1007/978-3-319-93587-4_1
8. Heisel, U., Zaloga, W., Krivoruchko, D., Storchak, M., Goloborodko, L. (2013). Modelling of orthogonal cutting processes with the method of smoothed particle hydrodynamics. Production Engineering, 7 (6), 639–645. doi: https://doi.org/10.1007/s11740-013-0484-0
9. Rajab Zadeh, M., Zaloga, V. A., Ivchenko, O. V. (2013). Statistical Analysis of Certification Process of International Standard SA 8000 on Social Accountability. International Journal of Engineering Research in Africa, 9, 67–75. doi: https://doi.org/10.4028/www.scientific.net/jera.9.67
10. Zaloga, V. A., Krivoruchko, D. V., Lebedev, V. Y., Zaloga, O. A. (2012). The effect of the nitrogen ion-beam implantation on adhesiveness of the WC-8Co hard alloy. Journal of Superhard Materials, 34 (1), 44–48. doi: https://doi.org/10.3103/s1063457612010054
11. Heisel, U., Krivoruchko, D. V., Storchak, M., Saloga, W. A., Stehle, T. (2010). Verfahren zur experimentellen Bestimmung von Parametern für Reibungsmodelle beim Zerspanen. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 105 (12), 1043–1051. doi: https://doi.org/10.3139/104.110457
12. Heisel, U., Krivoruchko, D. V., Zaloha, W. A., Storchak, M., Stehle, T. (2009). Bruchmodelle für die Modellierung von Zerspanprozessen. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 104 (5), 330–339. doi: https://doi.org/10.3139/104.110057
13. Heisel, U., Krivoruchko, D. V., Zaloha, W. A., Storchak, M., Stehle, T. (2009). Die FEM-Modellierung als moderner Ansatz zur Untersuchung von Zerspanprozessen. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 104 (7-8), 604–616. doi: https://doi.org/10.3139/104.110127
14. Heisel, U., Krivoruchko, D. V., Zaloha, W. A., Storchak, M., Stehle, T. (2009). Thermomechanische Wechselwirkungen beim Zerspanen. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 104 (4), 263–272. doi: https://doi.org/10.3139/104.110016