Profile Image

Dmitriy Demin

Dmitriy Demin Mail
National Technical University «Kharkiv Polytechnic Institute», PC Technology Center, Ukraine

Professor, Director of PC Technology Center

 

Scopus profile: link

Researcher ID: E-5666-2016

Google Scholar profile: link

ID ORCID: http://orcid.org/0000-0002-7946-3651


Professional (scientific) interestsmathematical modeling and optimization of technological processes under uncertainty, applied aspects of fuzzy mathematics in optimal control problems, Optimal design of mechanical systems


Selected Publications:

1. Demin, D. (2020). Constructing the parametric failure function of the temperature control system of induction crucible furnaces. EUREKA: Physics and Engineering, 6, 19–32. doi: http://doi.org/10.21303/2461-4262.2020.001489

2. Demin, D., Schwickerath, H., Schwickerath, K. (2020). Network planning of the publishing process for the issue of the magazine. Technology Audit and Production Reserves, 5 (4(55)), 23–28. doi: http://doi.org/10.15587/2706-5448.2020.214716

3. Demin, D. (2019). Development of «whole» evaluation algorithm of the control quality of «cupola – mixer» melting duplex process. Technology Audit and Production Reserves, 3 (1(47)), 4–24. doi: http://doi.org/10.15587/2312-8372.2019.174449

4. Demin, D. (2018). Investigation of structural cast iron hardness for castings of automobile industry on the basis of construction and analysis of regression equation in the factor space «carbon (C) - carbon equivalent (Ceq)». Technology Audit and Production Reserves, 3 (1(41)), 29–36. doi: http://doi.org/10.15587/2312-8372.2018.109097

5. Demin, D. (2017). Synthesis of optimal control of technological processes based on a multialternative parametric description of the final state. Eastern-European Journal of Enterprise Technologies, 3 (4 (87)), 51–63. doi: http://doi.org/10.15587/1729-4061.2017.105294

6. Mohanad, M. K., Kostyk, V., Domin, D., & Kostyk, K. (2016). Modeling of the case depth and surface hardness of steel during ion nitriding. Eastern-European Journal of Enterprise Technologies, 2(5(80)), 45. doi: http://doi.org/10.15587/1729-4061.2016.65454

7. Demin, D. A. (2013). Artificial orthogonalization in searching of optimal control of technological processes under uncertainty conditions. Eastern-European Journal of Enterprise Technologies, 5 (9 (65)), 45–53. Available at: http://journals.uran.ua/eejet/article/view/18452/16199

8. Demin, D. A. (2013). Nechetkaja klasterizacija v zadache postroenie modelej «Sostav–svojstvo» po dannym passivnogo jeksperimenta v uslovijah neopredeljonnosti. Problemy mashinostroenija, 16 (6), 15–23.

9. Demin, D. A. (2012). Synthesis of optimal temperature regulator of electroarc holding furnace bath. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 6, 52–58. Available at: https://www.scopus.com/record/display.uri?eid=2-s2.0-84872193342&origin=inward&txGid=60b19622f54711af69e5273f8eec2745

10. Seraya, O. V., Demin, D. A. (2012). Linear Regression Analysis of a Small Sample of Fuzzy Input Data. Journal of Automation and Information Sciences, 44 (7), 34–48. doi: http://doi.org/10.1615/jautomatinfscien.v44.i7.40

11. Demin, D. A. (2012). Synthesis process control elektrodugovoy smelting iron. Eastern-European Journal of Enterprise Technologies, 2 (10 (56)), 4–9. Available at: http://journals.uran.ua/eejet/article/view/3881/3557

12. Demin, D. A., Demina, E. B., Akimov, O. V. (2012). Resursosberegajushhie tehnologii litejnogo proizvodstva. Kharkiv: PE "Technology Center", 320.

13. Demin, D. A. (2011). Evaluation of potential reserves of production for melting synthetic iron. Technology audit and production reserves, 1 (1 (1)), 15–24. doi: http://doi.org/10.15587/2312-8372.2011.4082

14. Seraia, O. V., Demin, D. A. (2010). Ocenka predstavitel'nosti usechennyh ortogonal'nyh podplanov plana polnogo faktornogo ieksperimenta. Sistemnі doslіdzhennia ta іnformacіinі tehnologіi, 3, 84–88.

15. Demin, D. A., Katkova, T. I. (2010). Metod obrabotki maloi vyborki nechetkih rezul'tatov ortogonalizovannogo passivnogo ieksperimenta. Vіsnik Іnzhenernoi Akademіi, 2, 234–237.

16. Raskin, L. G., Demin, D. A. (2010). Iskusstvennaia ortogonalizaciia passivnogo ieksperimenta v usloviiah maloi vyborki. Іnformacіino-keruiuchі sistemi na zalіznichnomu transportі, 1, 20–23.

17. Demin, D. A. (2010). Sovershenstvovanie processov uprav leniia ielektroplavkoi. Vіsnik nacіonal'nogo tehnіchnogo unіversitetu «HPІ», 4, 33–44.

18. Seraja, O. V., Demin, D. A. (2009). Ocenivanie parametrov uravnenija regressii v uslovijah maloj vyborki. Eastern-European Journal of Enterprise Technologies, 6 (4 (42)), 14–19. Available at: https://elibrary.ru/item.asp?id=23128094

19. Demin, D. A. (2006). Optimizacija tehnologicheskih rezhimov. Eastern-European Journal of Enterprise Technologies, 2 (1 (20)), 32–35.

20. Demin, D. A., Bozhko, A. B., Zrajchenko, A. V., Nekrasov, A. G. (2006). Identifikaciia chuguna dlia opredeleniia racional'nyh rezhimov legirovaniia. Eastern-European Journal of Enterprise Technologies, 4 (1 (22)), 29–32.

21. Demin, D. A. (2005). Modelirovanie kinetiki himsostava chuguna pri plavke v elektrodugovoi pechi. Vіsnik nacіonal'nogo tehnіchnogo unіversitetu «KhPІ», 27, 41–46.

22. Demin, D. A. (2005). Optimizacija tehnologicheskogo processa v cehe predprijatija. Eastern-European Journal of Enterprise Technologies, 6 (4 (18)), 48–59.

23. Demin, D. A. (2005). Diagnostika tehnologicheskogo processa. Rukovodstvo dlia tehnologa. Eastern-European Journal of Enterprise Technologies, 5 (1 (17)), 29–40.

24. Demin, D. A. (2004). Optimizaciia rezhima raboty dugovoi ielektropechi pri plavke legirovannogo chuguna. Eastern-European Journal of Enterprise Technologies, 6 (12), 43–50.

25. Demin, D. A., Pelikh, V. F., Ponomarenko, O. I. (1998). Complex alloying of grey cast iron. Litejnoe Proizvodstvo, 10, 18–19. Available at: https://www.scopus.com/record/display.uri?eid=2-s2.0-0032185901&origin=inward&txGid=124e4949ccb1b4148c6ff63b3f21cfab

26. Demin, D. A. (1998). Change in cast iron's chemical composition in inoculation with a Si-V-Mn master alloy. Litejnoe Proizvodstvo, 6, 35. Available at: https://www.scopus.com/record/display.uri?eid=2-s2.0-0032098470&origin=inward&txGid=ee3a0ac5c584374e009ec710ca4c2824

27. Demin, D. A., Pelikh, V. F., Ponomarenko, O. I. (1995). Optimization of the method of adjustment of chemical composition of flake graphite iron. Litejnoe Proizvodstvo, 7-8, 42–43. Available at: https://www.scopus.com/record/display.uri?eid=2-s2.0-0029332616&origin=inward&txGid=63534489b7fcbe462e9a15c5bd095ad0

28. Demіn, D. A. (1995). Deiakі aspekti upravlіnnia iakіstiu chavuna z plastinchastim grafіtom. Kharkiv, 181.