Parametric synthesis of combined automatic regulating systems with digital PIDcontrollers
DOI:
https://doi.org/10.15587/1729-4061.2017.118753Keywords:
combined systems, digital control systems, multicriterial parametric synthesis, PID-controllerAbstract
The problem of calculation of combined digital automatic regulation systems was considered. The main purpose of the study was to develop, on the basis of the principle of invariance, a method of parametric synthesis of combined systems with digital PID-controllers. To calculate the closed loop of the combined system taking into account the requirements to its stability and quality of regulation, the method of multicriterial parametric optimization was used. Conditions of physical realization of the ideal compensator on the basis of absence of a link with a negative net delay and ideal differentiating links in its transfer function were indicated. Choice of the structure of the transfer function of the real compensator was substantiated on the basis of coincidence of its complex frequency response with the complex frequency response of the ideal compensator at zero and operating frequencies. The results of synthesis of a combined system with a digital PID-controller and a real object have shown that the proposed method ensures quality of the digital system practically equivalent to that of the continuous system which is ensured by the choice of the structure of the discrete algorithm of the closed loop operation and the corresponding choice of the period of discreteness. In particular, it has been found that the use of the compensator enables an approximately fivefold reduction of the maximum dynamic deviation of the regulated value and approximately threefold improvement of the system dynamic precision according to integral absolute quality estimates. The developed approach can be applied for synthesis of combined systems with digital PID-controllers and a wide class of objectsReferences
- Ang, K. H., Chong, G., Li, Y. (2005). PID control system analysis, design, and technology. IEEE Transactions on Control Systems Technology, 13 (4), 559–576. doi: 10.1109/tcst.2005.847331
- Besekerskiy, V. A., Popov, E. P. (2004). Teoriya sistem avtomaticheskogo upravleniya. Sankt-Peterburg: Iz-vo “Professiya”, 752.
- Zaytsev, G. F. (1989). Teoriya avtomaticheskogo upravleniya i regulirovaniya. Kyiv: Vishcha shkola, 431.
- Balyuta, S. N., Nikitina, T. B., Kopylova, L. A., Tatarchenko, M. O., Homenko, V. V. (2014). Mnogokriterial'niy sintez kombinirovannoy stohasticheskoy robastnoy sistemy sovmestnogo regulirovaniya tolshchiny, natyazheniya i petli polosy v chistovoy gruppe shirokopolosnogo stana goryachey prokatki. Visnyk NTU "KhPI". Seriya: Informatyka ta modeliuvannia, 35, 4–14.
- Singh, R., Muzzio, F., Ierapetritou, M., Ramachandran, R. (2015). A Combined Feed-Forward/Feed-Back Control System for a QbD-Based Continuous Tablet Manufacturing Process. Processes, 3 (2), 339–356. doi: 10.3390/pr3020339
- Altun, Y., Gulez, K., Mumcu, T. V. (2013). Static LPV feedforward controller synthesis for Linear Parameter Varying systems. 2013 9th Asian Control Conference (ASCC). doi: 10.1109/ascc.2013.6606109
- Chernyshev, N. N. (2012). Sintez kompensatorov dlya kombinirovannyh sistem avtomaticheskogo regulirovaniya. Zbirnyk naukovykh prats DonIZT, 32, 52–56.
- Cus, F., Zuperl, U., Balic, J. (2011). Combined feedforward and feedback control of end milling system. Journal of Achievements in Materials and Manufacturing Engineering, 45 (1), 79–88.
- Blana, D., Kirsch, R. F., Chadwick, E. K. (2009). Combined feedforward and feedback control of a redundant, nonlinear, dynamic musculoskeletal system. Medical & Biological Engineering & Computing, 47 (5), 533–542. doi: 10.1007/s11517-009-0479-3
- Rotach, V. Ya. (2008). Teoriya avtomaticheskogo upravleniya. Moscow: Izdatel'skiy dom MEI, 396.
- Brosilow, C., Joseph, B. (2002). Techniques of Model-based Control. Upper Saddle River: Prentice Hall, 704.
- Kovela, I. M., Drevetskyi, V. V., Kovela, S. I. (2017). Kompiuteryzovani systemy keruvannia. Rivne: Ovid, 672.
- Dudykevych, V. B., Kovela, I. M., Moroz, L. V., Ivaniuk, O. O. (2000). Bahatokryterialna parametrychna optymizatsiya avtomatychnykh system rehuliuvannia z realnymy PID-rehuliatoramy. Avtomatyka-2000: mater. mizhn. konf. z upravlinnia. Lviv, 158–163.
- Kovela, I. M., Ivaniuk, O. O. (2008). Inzhenerna metodyka syntezu avtomatychnykh system z PID-rehuliatoramy. Visnyk Natsionalnoho universytetu “Lvivska politekhnika”. Seriya: Vymiriuvalna tekhnika ta metrolohiya, 69, 43–51.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2017 Ivan Kovela, Oleg Ivaniuk, Galina Vlakh-Vyhrynovska, Roman Stakhiv
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
