Kinetics of impregnation of fiber fillaments by epoxy resin compositions

Authors

  • Олександр Євгенович Колосов National Technical University of Ukraine "Kyiv Polytechnic Institute" Ave. Peremogy 37, building 19, Kyiv, 03056, Ukraine
  • Володимир Іванович Сівецький National Technical University of Ukraine "Kyiv Polytechnic Institute" Ave. Peremogy 37, building 19, Kyiv, 03056, Ukraine
  • Лілія Анатоліївна Кричковська National Technical University of Ukraine "Kyiv Polytechnic Institute" Ave. Peremogy 37, building 19, Kyiv, 03056, Ukraine
  • Олена Петрівна Колосова National Technical University of Ukraine "Kyiv Polytechnic Institute" Ave. Peremogy 37, building 19, Kyiv, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.12395

Keywords:

Kinetics, process, leaks, fiberfill, composition, epoxy resin

Abstract

Are analyzed the predictive kinetic equation impregnation process fibrous fillers epoxy binder solutions using conventional filtration theory for laminar flow of viscous non-Newtonian fluid, which is not compressed, given the structural characteristics of fibrous fillers as a capillary-porous body, namely, porosity, specific internal surface, effectively (equivalent) radius of the capillary. Refined kinetic equation of the longitudinal or transverse impregnation of continuous fiber filler obtained for the most efficient from a technological point of view, cross-sectional shape of fibrous fillers (belt material: fiberglass, glass fiber, bundles of rectangular cross-section) because of its structural and geometric parameters and the parameters of the impregnation process, namely : tension force fibrous fillers, rheology liquid epoxy adhesive and pressure impregnation. The resulting equation to predict the main kinetic parameters of the impregnation process (time and leakage rate, lift height binder), as well as design parameters for the impregnation equipment (dimensions impregnating bath). The directions of the intensification of the process of impregnation

Author Biographies

Олександр Євгенович Колосов, National Technical University of Ukraine "Kyiv Polytechnic Institute" Ave. Peremogy 37, building 19, Kyiv, 03056

Doctor of Technical Sciences, Professor

Department of chemical, polymer and silicate engineering

Володимир Іванович Сівецький, National Technical University of Ukraine "Kyiv Polytechnic Institute" Ave. Peremogy 37, building 19, Kyiv, 03056

PhD, professor

Department of chemical, polymeric and silicate engineering

Лілія Анатоліївна Кричковська, National Technical University of Ukraine "Kyiv Polytechnic Institute" Ave. Peremogy 37, building 19, Kyiv, 03056

Student

Department of chemical, polymeric and silicate engineering

Олена Петрівна Колосова, National Technical University of Ukraine "Kyiv Polytechnic Institute" Ave. Peremogy 37, building 19, Kyiv, 03056

Research associate

References

  1. Цыплаков, О.Г. Научные основы технологии композиционно-волокнистых материалов. Ч.1 / Цыплаков О.Г. ― Пермь, 1974. ― 317с.
  2. Колосов, О.Є. Математичне моделювання базових процесів виготовлення полімерних композиційних матеріалів із застосуванням ультразвукової модифікації/ Колосов О.Є., Сівецький В.І., Панов Є.М., Мікульонок І.О. та ін. - К.: ВД «Едельвейс», 2012. - 268 с.
  3. Плоткин Л. Г. Технология и оборудование пропитки бумаги полимерами / Л. Г. Плоткин, Г. В. Шалун ― М.: Лесная промышленность, 1985. ― 119 с.
  4. Коновалов В. И. Пропиточно-сушильное и клеепромазочное оборудование / Коновалов В. И. ― М.: Химия, 1989. ― 224 с.
  5. L. Ye. Composite technologies for 2020/ L. Ye, Y-W. Mai , Z. Su // Proceedings of the fourth Asian-Australasian conference on composite materials ACCM 4. - June, 2004. - University of Sydney, Australia. ― 1120 р.
  6. Jana D. Sample Preparation Techniques in Petrographic Examinations of Construction Materials / D. Jana // A State-of-the-art Review: Proceedings of the 28th Conference on Cement microscopy, Courtesy of the International Cement Microscopy Association (ICMA). ― Denver, Colorado, 2006. ― P.P. 23―70.
  7. Pat. # 7235149 US, IPC B32B5/12; D04H/00. Process and equipment for manufacture of advanced composite structures / Taggart David (US). — № US2005236093; fill. 26.04.2005; publ. 27.10.2005.
  8. Pat. # 2008001705 WO, IPC C08J5/24; C08L53/02; C08L63/02; C08J5/24; C08L53/00; C08L63/00. Epoxy resin composition, prepreg, and fiber-reinforced composite material / Sakata Hiroaki [JP]; Tomioka Nobuyuki [JP]; Honda Shiro [JP]). — №PCT/JP2007/062665; fill. 25.06.2007; publ. 03.01.2008.
  9. Pat. # 2008090614 WO, IPC H05K1/03; B32B15/08; C08J5/24. Prepreg, printed wiring board, multilayer circuit board and process for manufacturing printed wiring board / Fukuhara Yasuo [JP]; Watanabe Tomoaki [JP]. — №WO2007JP51166 20070125; fill.25.01.2007; publ. – 31.07.2008.
  10. Pat. # 2008087890, IPC C08G59/62; B32B15/08; B32B15/092; H05K3/46; C08G59/00; B32B15/08; H05K3/46. Thermosetting resin composition / Taiyo Ink Mfg Co Ltd [JP]; Murata Katsuto, Nakai Koshin, Hayashi Makoto [JP]. — № WO2008JP50218 20080110; fill. 15.01.2007; publ. 24.07.2008.
  11. Tsyplakov O.G. Scientific basis of the technology of composition-fibrous materials. Part 1 / O.G. Tsyplakov - Perm, 1974. – 317 p.
  12. Kolosov O.Ye. Mathematical modeling of the basic processes for preparing resin composite materials using ultrasound modification / Kolosov O.Ye., Sivetskyy V.I. Panov E.N., Mikulionok I.O. etc. - K.: ID "Edelweis", 2012. - 268 p.
  13. Plotkin L.G. Technology and equipment for impregnation of paper by resins / L.G. Plotkin, G.V.Shalun. - M.: Forest Industry, 1985. - 119 p.
  14. Konovalov V.I. Impregnating-drying and glue adhesive application equipment / Konovalov V.I. - M.: Chemistry, 1989. – 224 p.
  15. L. Ye. Composite technologies for 2020/ L. Ye, Y-W. Mai , Z. Su // Proceedings of the fourth Asian-Australasian conference on composite materials ACCM 4. - June, 2004. - University of Sydney, Australia. ― 1120 р.
  16. Jana D. Sample Preparation Techniques in Petrographic Examinations of Construction Materials / D. Jana // A State-of-the-art Review: Proceedings of the 28th Conference on Cement microscopy, Courtesy of the International Cement Microscopy Association (ICMA). ― Denver, Colorado, 2006. ― P.P. 23―70.
  17. Pat. # 7235149 US, IPC B32B5/12; D04H/00. Process and equipment for manufacture of advanced composite structures / Taggart David (US). — № US2005236093; fill. 26.04.2005; publ. 27.10.2005.
  18. Pat. # 2008001705 WO, IPC C08J5/24; C08L53/02; C08L63/02; C08J5/24; C08L53/00; C08L63/00. Epoxy resin composition, prepreg, and fiber-reinforced composite material / Sakata Hiroaki [JP]; Tomioka Nobuyuki [JP]; Honda Shiro [JP]). — №PCT/JP2007/062665; fill. 25.06.2007; publ. 03.01.2008.
  19. Pat. # 2008090614 WO, IPC H05K1/03; B32B15/08; C08J5/24. Prepreg, printed wiring board, multilayer circuit board and process for manufacturing printed wiring board / Fukuhara Yasuo [JP]; Watanabe Tomoaki [JP]. — №WO2007JP51166 20070125; fill.25.01.2007; publ. – 31.07.2008.
  20. Pat. # 2008087890, IPC C08G59/62; B32B15/08; B32B15/092; H05K3/46; C08G59/00; B32B15/08; H05K3/46. Thermosetting resin composition / Taiyo Ink Mfg Co Ltd [JP]; Murata Katsuto, Nakai Koshin, Hayashi Makoto [JP]. — № WO2008JP50218 20080110; fill. 15.01.2007; publ. 24.07.2008.

Downloads

Published

2013-04-25

How to Cite

Колосов, О. Є., Сівецький, В. І., Кричковська, Л. А., & Колосова, О. П. (2013). Kinetics of impregnation of fiber fillaments by epoxy resin compositions. Eastern-European Journal of Enterprise Technologies, 2(5(62), 13–16. https://doi.org/10.15587/1729-4061.2013.12395

Issue

Vol. 2 No. 5(62) (2013): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Олександр Євгенович Колосов, Володимир Іванович Сівецький, Лілія Анатоліївна Кричковська, Олена Петрівна Колосова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.