Cited-by:
1. Multifactorial Empirical Model of Three-Cone Bit Gear Oscillation Energy
V. M. Moysyshyn, М. V. Lyskanych, L. V. Borysevych, R. A. Zhovniruk
METALLOFIZIKA I NOVEISHIE TEKHNOLOGII Vol: 42 Issue: 12 First page: 1729 Year: 2020
doi: 10.15407/mfint.42.12.1729
2. Study on grinding mode effect on external conical thread quality
L Ya Ropyak, V S Vytvytskyi, A S Velychkovych, T O Pryhorovska, M V Shovkoplias
IOP Conference Series: Materials Science and Engineering Vol: 1018 First page: 012014 Year: 2021
doi: 10.1088/1757-899X/1018/1/012014
3. Analysis of Causes and Preventing Ways of Early Workability Loss of Three-Cone Rock Bit Cutters
R. S. Yakym, D. Yu. Petryna
METALLOFIZIKA I NOVEISHIE TEKHNOLOGII Vol: 42 Issue: 5 First page: 731 Year: 2020
doi: 10.15407/mfint.42.05.0731
4. Analytical study of “crosshead – slide rail” wear effect on pump rod stress state
L Y Ropyak, A S Velychkovych, V S Vytvytskyi, M V Shovkoplias
Journal of Physics: Conference Series Vol: 1741 First page: 012039 Year: 2021
doi: 10.1088/1742-6596/1741/1/012039
5. Analysis of Materials and Modern Technologies for PDC Drill Bit Manufacturing
L. Ya. Ropyak, T. O. Pryhorovska, K. H. Levchuk
Uspehi Fiziki Metallov Vol: 20 Issue: 2 First page: 274 Year: 2020
doi: 10.15407/ufm.21.02.274
6. Developing a system and criteria for directed choice of technology to provide required quality of surfaces of flexible coupling parts for rotor machines
V Melnyk, V Vlasovets, Ie Konoplianchenko, V Tarelnyk, M Dumanchuk, Vas Martsynkovskyy, Yu Semirnenko, S Semirnenko
Journal of Physics: Conference Series Vol: 1741 First page: 012030 Year: 2021
doi: 10.1088/1742-6596/1741/1/012030
Copyright (c) 2019 Nikolaj Volchenko, Aleksandr Volchenko, Dmitriy Volchenko, Pavel Poliakov, Volоdymyr Malyk, Dmitriy Zhuravliov, Vasyl Vytvytskyi, Petr Krasin

This work is licensed under a Creative Commons Attribution 4.0 International License.
ISSN (print) 1729-3774, ISSN (on-line) 1729-4061