Calculation of stress concentrations in orthotropic cylindrical shells with holes on the basis of a variational method

Authors

DOI:

https://doi.org/10.15587/1729-4061.2019.169631

Keywords:

orthotropic shell with holes, stress concentration, Reissner principle, R-functions theory.

Abstract

A variational numerical-analytical method (called the RVR method) is suggested for calculating the strength and stiffness of statically loaded non-thin orthotropic shell structures weakened by holes (stress concentrators) of arbitrary shapes and sizes. The theoretically substantiated new method is based on the Reissner variational principle and the method of I. N. Vekua (the method of decomposing the desired functions into the Fourier series of the orthogonal Legendre polynomials with respect to the coordinate along the constant shell thickness). In this case, the use in the proposed RVR method of the general equations of three-dimensional problems of the linear theory of elasticity makes it possible to determine the total stress-strained state of an elastic shell (in particular, a plate) with holes. At the same time, using the R-functions, at the analytical level, the geometric information of boundary-value problems for multiply connected domains is taken into account and solutions structures are constructed that exactly satisfy different variants of boundary conditions. The use of a software-implemented algorithm for the two-sided integral assessment of the accuracy of approximate solutions in the study of mixed variational problems helps automate the search for such a number of approximations in which the process of convergence of solutions becomes stable.

For orthotropic and isotropic materials, the possibilities of the RVR method are shown in numerical examples of solving the corresponding boundary value problems of calculating the stress concentration in a cylindrical shell with an elliptical or rectangular hole under axial load. The results of the performed tests are discussed, and the features characteristic of the new method prove that it can be effectively used in the design of critical lamellar and shell elements of structures in various fields of modern technology.

Author Biographies

Valentin Salo, National Academy of National Guard of Ukraine Zakhysnykiv Ukrainy sq., 3, Kharkiv, Ukraine, 61001

Doctor of Technical Sciences, Professor

Department of Mechanical Engineering

Valeriia Rakivnenko, National Academy of National Guard of Ukraine Zakhysnykiv Ukrainy sq., 3, Kharkiv, Ukraine, 61001

PhD, Associate Professor, Head of Department

Department of Mechanical Engineering

Vladimir Nechiporenko, National Academy of National Guard of Ukraine Zakhysnykiv Ukrainy sq., 3, Kharkiv, Ukraine, 61001

PhD, Associate Professor

Department of Mechanical Engineering

Aleksandr Kirichenko, National Academy of National Guard of Ukraine Zakhysnykiv Ukrainy sq., 3, Kharkiv, Ukraine, 61001

PhD, Associate Professor

Department of Mechanical Engineering

Serhii Horielyshev, Moscow Aviation Institute (National Research University) Volokolamskoe highway, 4, Moscow, Russia, 125993

Training Center

Dmytro Onopreichuk, Ukrainian State University of Railway Transport Feierbakh sq., 7, Kharkiv, Ukraine, 61050

PhD, Associate Professor

Department of Construction, Track and Handling Machines

Volodymyr Stefanov, Ukrainian State University of Railway Transport Feierbakh sq., 7, Kharkiv, Ukraine, 61050

PhD, Associate Professor

Department of Construction, Track and Handling Machines

References

  1. Rezaeepazhand, J., Jafari, M. (2010). Stress concentration in metallic plates with special shaped cutout. International Journal of Mechanical Sciences, 52 (1), 96–102. doi: https://doi.org/10.1016/j.ijmecsci.2009.10.013
  2. Guz', A. N., Chernyshenko, I. S., Chekhov, Val. N., Chekhov, Vik. N., Shnerenko, K. I. (1980). Teoriya tonkih obolochek, oslablennyh otverstiyami. Vol. 1. Metody rascheta obolochek. Kyiv: Naukova dumka, 636.
  3. Washizu, K. (1982). Variational methods in elasticity and plasticity. New York, 542.
  4. Klochkov, Y. V., Nikolaev, A. P., Sobolevskaya, T. A., Klochkov, M. Y. (2018). Comparative analysis of efficiency of use of finite elements of different dimensionality in the analysis of the stress-strain state of thin shells. Structural Mechanics of Engineering Constructions and Buildings, 14 (6), 459–466. doi: https://doi.org/10.22363/1815-5235-2018-14-6-459-466
  5. Li, J., Shi, Z., Liu, L. (2019). A scaled boundary finite element method for static and dynamic analyses of cylindrical shells. Engineering Analysis with Boundary Elements, 98, 217–231. doi: https://doi.org/10.1016/j.enganabound.2018.10.024
  6. Ádány, S. (2016). Shell element for constrained finite element analysis of thin-walled structural members. Thin-Walled Structures, 105, 135–146. doi: https://doi.org/10.1016/j.tws.2016.04.012
  7. Ádány, S. (2017). Constrained shell finite element method for thin-walled members with holes. Thin-Walled Structures, 121, 41–56. doi: https://doi.org/10.1016/j.tws.2017.09.021
  8. Salo, V. A. (2003). Kraevye zadachi statiki obolochek s otverstiyami. Kharkiv: NTU «KhPI», 216.
  9. Reissner, E. (1950). On a Variational Theorem in Elasticity. Journal of Mathematics and Physics, 29 (1-4), 90–95. doi: https://doi.org/10.1002/sapm195029190
  10. Pramod, A. L. N., Natarajan, S., Ferreira, A. J. M., Carrera, E., Cinefra, M. (2017). Static and free vibration analysis of cross-ply laminated plates using the Reissner-mixed variational theorem and the cell based smoothed finite element method. European Journal of Mechanics - A/Solids, 62, 14–21. doi: https://doi.org/10.1016/j.euromechsol.2016.10.006
  11. Faghidian, S. A. (2018). Reissner stationary variational principle for nonlocal strain gradient theory of elasticity. European Journal of Mechanics - A/Solids, 70, 115–126. doi: https://doi.org/10.1016/j.euromechsol.2018.02.009
  12. Vekua, I. N. (1965). Teoriya tonkih pologih obolochek peremennoy tolschiny. Vol. 30. Tbilisi, 3–103.
  13. Timoshenko, S., Woinowsky-Krieger, S. (1987). Theory of Plates and Shells. New York: McGraw-Hill Book Company, 580.
  14. Salo, V. A., Nechiporenko, V. M. (2017). Research of durability of the elastic cylindrical structure affected by the local loading. Zbirnyk naukovykh prats Natsionalnoi akademiyi Natsionalnoi hvardiyi Ukrainy, 2, 76–82.
  15. Salo, V. A., Litovchenko, P. I., Chizhikov, I. V. (2011). Napryazhenno-deformirovannoe sostoyanie uprugoy tsilindricheskoy paneli s otverstiem. Voprosy proektirovaniya i proizvodstva konstruktsiy letatel'nyh apparatov, 1, 63–70.
  16. Salo, V. A. (2004). O kontsentratsii napryazheniy okolo otverstiya v uprugoy sfericheskoy obolochke. Voprosy proektirovaniya i proizvodstva konstruktsiy letatel'nyh apparatov, 2, 66–72.
  17. Salo, V. A. (2000). Dokazatel'stvo dostatochnogo priznaka skhodimosti metoda Rittsa dlya smeshannogo variatsionnogo printsipa Reyssnera. Vestnik Har'kov. gos. politekh. un-ta, 95, 70–75.
  18. Awrejcewicz, J., Kurpa, L., Shmatko, T. (2015). Investigating geometrically nonlinear vibrations of laminated shallow shells with layers of variable thickness via the R-functions theory. Composite Structures, 125, 575–585. doi: https://doi.org/10.1016/j.compstruct.2015.02.054
  19. Nechyporenko, V. M., Salo, V. A., Litovchenko, P. I., Kovbaska, B. V., Verkhorubov, D. O. (2016). Vykorystannia teoriyi R-funktsiy dlia stvorennia ratsionalnykh posadok z natiahom. Zbirnyk naukovykh prats Natsionalnoi akademiyi Natsionalnoi hvardiyi Ukrainy, 2, 72–76.
  20. Rodionova, V. A., Titaev, B. F., Chernyh, K. F. (1996). Prikladnaya teoriya anizotropnyh plastin i obolochek. Sankt-Peterburg: SpbGU, 278.
  21. Rodionova, V. A. (1983). Teoriya tonkih anizotropnyh obolochek s uchetom poperechnyh sdvigov i obzhatiya. Leningrad: LGU, 116.
  22. Salo, V. A. (2003). O dvustoronney otsenke tochnosti priblizhennyh resheniy zadach teorii obolochek, poluchennyh metodom Rittsa dlya neekstremal'nogo funktsionala Reyssnera. Dopovidi NAN Ukrainy, 1, 53–57.
  23. Tennyson, R. S., Roberts, D. K., Zimcik, D. (1968). Analysis of the stress distribution around unreinforced cutouts in circular cylindrical shells under axial compressions. NRC, NASA, Annyal Progress Report, UTIAS.
  24. Zirka, A. I., Chernopiskiy, D. I. (2001). Eksperimental'nye issledovaniya kontsentratsii napryazheniy v tolstyh tsilindricheskih obolochkah s pryamougol'nymi otverstiyami pri osevom szhatii. Prikladnaya mekhanika, 5, 133–135.

Downloads

Published

2019-06-06

How to Cite

Salo, V., Rakivnenko, V., Nechiporenko, V., Kirichenko, A., Horielyshev, S., Onopreichuk, D., & Stefanov, V. (2019). Calculation of stress concentrations in orthotropic cylindrical shells with holes on the basis of a variational method. Eastern-European Journal of Enterprise Technologies, 3(7 (99), 11–17. https://doi.org/10.15587/1729-4061.2019.169631

Issue

Vol. 3 No. 7 (99) (2019): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2019 Valentin Salo, Valeriia Rakivnenko, Vladimir Nechiporenko, Aleksandr Kirichenko, Serhii Horielyshev, Dmytro Onopreichuk, Volodymyr Stefanov

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.