Pressing technology and burning quality of spherical fuel briquettes made from autumn leaves

Authors

DOI:

https://doi.org/10.15587/1729-4061.2020.198724

Keywords:

pressing technology, spherical briquette, autumn leaves, briquette density, briquette burning

Abstract

A process has been developed to press fuel briquettes from autumn leaves. It has been shown that a spherical shape of a briquette is optimal since even dense packing of balls provides air access to each individual ball. This is especially important in the initial phase of burning when briquettes touch each other and gain a certain temperature, because of the quality of burning increases. The technology of briquette pressing has been devised. We studied dispersion of particles of dry leaves of nutwood, maple, and oak after grinding and found that particle size distribution of powders of different leaves is not the same, and their bulk density is proportional to size with the highest content.

A new method for pressing briquettes in a round closed matrix has been proposed. The difference of the method is in the fact that the process takes place at the creation of a scheme of all-embracing uniform compression with a spherical application of force and obtaining of a ball-shaped briquette in the final phase. The method makes it possible to compress ground leaves radially and evenly and thereby to ensure equal burning conditions for a briquette in a radial direction from any point on the periphery. We derived a mathematical model of the dependence of the density of dry briquettes on the bulk density of ground leaves and the degree of compression of a briquette. It has been shown that the bulk density of ground leaves (65 %) has the greatest influence on the density of dry briquettes. An increase in the bulk density of ground leaves leads to an increase in the density of dry briquettes. The influence of the degree of compression of a briquette is much smaller (35 %) but it is significant. Its increase leads to an increase in the density of dry briquettes. The density of dry briquettes was from 0.67 to 1.07 g/cm3 during studies. We proposed a design of a round closed matrix with a variable wall thickness, which makes it possible to reduce its metal consumption and cost by 20‒30 %. It has been shown that it is expedient to use spherical briquettes of leaves as an alternative environmentally friendly fuel

Author Biographies

Viktor Bokov, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropyvnytskyi, Ukraine, 25006

PhD, Associate Professor

Department of Treatment of Metals and Special Technologies Pressure

Oleh Sisa, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropyvnytskyi, Ukraine, 25006

PhD

Department of Treatment of Metals and Special Technologies Pressure

Volodymyr Mirzak, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropyvnytskyi, Ukraine, 25006

PhD

Department of Treatment of Metals and Special Technologies Pressure

Olha Medvedieva, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropyvnytskyi, Ukraine, 25006

PhD, Associate Professor, Head of Department

Department of Ecology and Environmental Protection

References

  1. Lakyda, P. I., Heletukha, H. H., Vasylyshyn, R. D. et. al.; Lakyda, P. I. (Ed.) (2011). Enerhetychnyi potentsial biomasy v Ukraini. Kyiv: Vydavnychyi tsentr NUBiP Ukrainy, 28.
  2. Heletukha, H. H., Zheleznaia, T. A., Matvieiev, Yu. B., Zhovmir, M. M. (2006). Vykorystannia mistsevykh vydiv palyva dlia vyrobnytstva enerhiyi v Ukraini. Prom. teplotekhnika, 28 (2), 85–93. Available at: http://dspace.nbuv.gov.ua/bitstream/handle/123456789/61394/12-Geletukha.pdf?sequence=1
  3. Furtado, T. S., Valin, M., Brand, M. A., Bellote, A. F. J. (2010). Variáveis do processo de briquetagem e qualidade de briquetes de biomassa florestal. Pesquisa Florestal Brasileira, 30 (62), 101–106. doi: https://doi.org/10.4336/2010.pfb.30.62.101
  4. Karunanithy, C., Wang, Y., Muthukumarappan, K., Pugalendhi, S. (2012). Physiochemical Characterization of Briquettes Made from Different Feedstocks. Biotechnology Research International, 2012, 1–12. doi: https://doi.org/10.1155/2012/165202
  5. Fikri, E., Sartika, C. (2018). Study on the Use and Composition of Bio-Charcoal Briquettes Made of Organic Waste. Journal of Ecological Engineering, 19 (2), 81–88. doi: https://doi.org/10.12911/22998993/81782
  6. Bokov, V., Popova, M., Lysenko, R. (2013). Usage of autumn leaves for production of alternative types of fuel. Zbirnyk naukovykh prats Kirovohradskoho natsionalnoho tekhnichnoho universytetu. Tekhnika v silskohospodarskomu vyrobnytstvi, haluzeve mashynobuduvannia, avtomatyzatsiya, 26, 231–241. Available at: http://nbuv.gov.ua/UJRN/znpkntu_2013_26_40
  7. Tekhnolohiya vyrobnytstva riznykh vydiv biopalyva. Available at: https://bio.ukr.bio/ua/articles/2344/
  8. Bajwa, D. S., Peterson, T., Sharma, N., Shojaeiarani, J., Bajwa, S. G. (2018). A review of densified solid biomass for energy production. Renewable and Sustainable Energy Reviews, 96, 296–305. doi: https://doi.org/10.1016/j.rser.2018.07.040
  9. Torhivlia torishnim lystiam abo ekolohichnyi biznes. Available at: http://www.eco-live.com.ua/content/blogs/torg-vlya-tor-shn-m-listyam-abo-ekolog-chnii-b-znes
  10. Zhyhalov, O. A. (2011). Pat. No. 64567 UA. Line for production of fuel briquettes. No. u201104840; declareted: 19.04.2011; published: 10.11.2011, Bul. No. 21.
  11. Eksperimental'noe issledovanie szhiganiya toplivnyh briketov i opredelenie optimal'nyh rezhimov goreniya. Available at: https://euroasia-science.ru/tehnicheskie-nauki/%D1%8D%D0%BA%D1%81%D0%BF%D0%B5%D1%80%D0%B8%D0%BC%D0%B5%D0%BD%D1%82%D0%B0%D0%BB%D1%8C%D0%BD%D0%BE%D0%B5-%D0%B8%D1%81%D1%81%D0%BB%D0%B5%D0%B4%D0%BE%D0%B2%D0%B0%D0%BD%D0%B8%D0%B5-%D1%81%D0%B6%D0%B8%D0%B3/
  12. Bokov, V. M. (2017). Pat. No. 126418 UA. Sposib presuvannia bryketiv iz roslynnykh vidkhodiv v zakrytiyi matrytsi. No. u201709844; declareted. 11.10.2017; published. 25.06.2018, Bul. No. 12.
  13. Izmerenie vlazhnosti drevesiny i drevesnyh materialov. Available at: https://lesprominform.ru/jarticles.html?id=4097
  14. Vlazhnost' drevesiny. Available at: https://sushilnye-kamery.ru/blog/vlazhnost-drevesiny/vlazhnost-drevesiny-formula-rascheta-osobennosti-opredeleniya/
  15. Matúš, M., Križan, P., Beniak, J., Šooš, Ľ. (2015). Effects of initial moisture content on the production and quality properties of solid biofuel. Acta Polytechnica, 55 (5), 335. doi: https://doi.org/10.14311/ap.2015.55.0335
  16. Antsiferov, V. N., Bobrov, G. V., Druzhinin, L. K. et. al. (1987). Poroshkovaya metallurgiya i napylennye pokrytiya. Moscow: Metallurgiya, 792.
  17. Chugaev, R. R. (1982). Gidravlika. Leningrad: Energoizdat. Leningr. otd-nie, 672.
  18. Novik, F. S., Arsov, Ya. B. (1980). Optimizatsiya protsessov tehnologii metallov metodami planirovaniya eksperimentov. Moscow: Mashinostroenie; Sofiya: Tehnika, 304.
  19. Kaliyan, N., Vance Morey, R. (2009). Factors affecting strength and durability of densified biomass products. Biomass and Bioenergy, 33 (3), 337–359. doi: https://doi.org/10.1016/j.biombioe.2008.08.005
  20. Ivanova, T., Kolarikova, M., Havrland, B., Passian, L. (2014). Mechanical durability of briquettes made of energy crops and wood residues. Engineering for Rural Development, 131–136.
  21. Bokov, V. M. (2018). Pat. No. 132163 UA. Sposib presuvannia bryketiv u formi kuli iz roslynnykh vidkhodiv v zakrytiyi matrytsi. No. u201809653; declareted: 26.09.2018; published: 11.02.2019, Bul. No. 3.
  22. Bhagwanrao, S. V., Singaravelu, M. (2014). “Bulk density of biomass and particle density of their briquettes. International Journal of Agricultural Engineering, 7 (1), 221–224.
  23. Castellano, J. M., Gómez, M., Fernández, M., Esteban, L. S., Carrasco, J. E. (2015). Study on the effects of raw materials composition and pelletization conditions on the quality and properties of pellets obtained from different woody and non woody biomasses. Fuel, 139, 629–636. doi: https://doi.org/10.1016/j.fuel.2014.09.033
  24. Tyul'kova, E. G. (2017). Zol'nost' rasteniy v usloviyah gorodskoy sredy (na primere goroda Gomelya). Vestnik federal'nogo universiteta im. I. Kanta. Ser.: Estestvennye i meditsinskie nauki, 1, 58–65.
  25. Biedermann, F., Obernberger, I. (2005). Ash-related problems during biomass combustion and possibilities for a sustainable ash utilisation. BIOS Bioenergiesysteme. Available at: https://www.bios-bioenergy.at/uploads/media/Paper-Biedermann-AshRelated-2005-10-11.pdf

Downloads

Published

2020-04-30

How to Cite

Bokov, V., Sisa, O., Mirzak, V., & Medvedieva, O. (2020). Pressing technology and burning quality of spherical fuel briquettes made from autumn leaves. Eastern-European Journal of Enterprise Technologies, 2(1 (104), 60–72. https://doi.org/10.15587/1729-4061.2020.198724

Issue

Section

Engineering technological systems