Development of an adaptive method for regulating corset comfort based on the parameters of design zones identification

Authors

DOI:

https://doi.org/10.15587/1729-4061.2020.211997

Keywords:

comfort of a corset, modeling effect, design zone, morphological type, adaptive method

Abstract

The influence of modeling effect of the structural zones of a corset for everyday purposes on ensuring its comfort was studied. It was established that the design structure of a corset varies significantly, depending on the magnitude of the modeling effect on different torso sections. At the same time, the mechanism of application of zonal anthropometric correction of a torso varies depending on the comfort of materials. It was proved that morphological parameters of the women’s torso zones affect the methods and parameters of the formation of the typical segmentation of a corset.

Due to this, it became possible to substantiate analytically the ergonomic parameters of modeling effect in the «corset – torso» system for interactive designing the silhouette structures. Experimental studies proved the dispersion of the points of structural zones in the ranges of morphological types. It was shown that the rational variant of the combination of technological modules ensures a dimensional transformation of corset zones by means of grouping. In particular, the prospects of adaptation of the combined shape of a corset to the individual figure type were revealed.

This makes it possible to assert the possibility of adaptive regulation of the feeling of comfort in a corset by combining zonal-modular models of anthropometric features and transformation of modeling effects in technological modules.

It was shown that the technological module of a bustier cup provides the polyvariance of the breast volume through vertical and horizontal segmentation. The technological module of a belt-corset, in addition to the properties of the basic fabrics, takes into consideration frame elements. This results in fixing the desired modeling effect.

Thus, there are some grounds to argue that the introduction of a new type of corset design will increase the productivity of design works. The practical comfort of the proposed technological solutions will ensure the reduction of the number of corset types and sizes, which in terms of comfort are universal for adjacent sizes

Author Biographies

Alla Slavinska, Khmelnytskyi National University Instytuts’ka str., 11, Khmelnytskyi, Ukraine, 29016

Doctor of Technical Sciences, Professor

Department Technology and Design of Garments

Oksana Syrotenko, Khmelnytskyi National University Instytuts’ka str., 11, Khmelnytskyi, Ukraine, 29016

PhD, Аssociate Рrofessor

Department Technology and Design of Garments

Victoriia Mytsa, Khmelnytskyi National University Instytuts’ka str., 11, Khmelnytskyi, Ukraine, 29016

PhD, Аssociate Рrofessor

Department Technology and Design of Garments

Oksana Dombrovska, Khmelnytskyi National University Instytuts’ka str., 11, Khmelnytskyi, Ukraine, 29016

PhD, Аssociate Рrofessor

Department Technology and Design of Garments

References

  1. Kim, H. S., Choi, H. E., Park, C. K., Nam, Y. J. (2019). Standardization of the size and shape of virtual human body for apparel products. Fashion and Textiles, 6 (1). doi: https://doi.org/10.1186/s40691-019-0187-z
  2. Dāboliņa, I., Viļumsone, A., Dāboliņš, J., Strazdiene, E., Lapkovska, E. (2017). Usability of 3D anthropometrical data in CAD/CAM patterns. International Journal of Fashion Design, Technology and Education, 11 (1), 41–52. doi: https://doi.org/10.1080/17543266.2017.1298848
  3. Guo, M., Kuzmichev, V. E., Adolphe, D. C. (2015). Human-Friendly Design of Virtual System “female Body-dress.” Autex Research Journal, 15 (1), 19–29. doi: https://doi.org/10.2478/aut-2014-0033
  4. Greggianin, M., Tonetto, L. M., Brust-Renck, P. (2018). Aesthetic and functional bra attributes as emotional triggers. Fashion and Textiles, 5 (1). doi: https://doi.org/10.1186/s40691-018-0150-4
  5. Shpachkova, A. V., Andreeva, E. G., Chizhova, N. V. (2012). Vozdeystvie korsetnyh izdeliy na izmenenie razmernyh priznakov figur zhenshchin. Shveynaya promyshlennost', 1, 39–40.
  6. Haidashevska, O. (2013). Study methods posture corrections school age children special tools. Visnyk KNUTD, 3, 98–104. Available at: https://er.knutd.edu.ua/bitstream/123456789/1618/1/V71_P098-104.pdf
  7. Koo, S. H., Fallon, K. (2018). Explorations of wearable technology for tracking self and others. Fashion and Textiles, 5 (1). doi: https://doi.org/10.1186/s40691-017-0123-z
  8. Seo, S., Lang, C. (2019). Psychogenic antecedents and apparel customization: moderating effects of gender. Fashion and Textiles, 6 (1). doi: https://doi.org/10.1186/s40691-019-0175-3
  9. Lang, C., Wei, B. (2019). Convert one outfit to more looks: factors influencing young female college consumers’ intention to purchase transformable apparel. Fashion and Textiles, 6 (1). doi: https://doi.org/10.1186/s40691-019-0182-4
  10. Ceballos, L. M., Bejarano, M. (2017). Value segmentation of adolescents: a performance of appearance. International Journal of Fashion Design, Technology and Education, 11 (2), 148–159. doi: https://doi.org/10.1080/17543266.2017.1352039
  11. Slavinska, A., Zakharkevich, O., Kuleshova, S., Syrotenko, O. (2018). Development of a technology for interactive design of garments using add-ons of a virtual mannequin. Eastern-European Journal of Enterprise Technologies, 6 (1 (96)), 28–39. doi: https://doi.org/10.15587/1729-4061.2018.148984
  12. Davydenko, I. V., Podobna, A. D. (2018). Justification of design criteria for designing of corset products for special purposes. Tekhnichna estetyka i dyzain, 14, 60–65. Available at: https://er.knutd.edu.ua/bitstream/123456789/12553/1/20190530_304.pdf
  13. Mengna, G., Kuzmichev, V. E. (2013). Pressure and comfort perception in the system “female body–dress.” Autex Research Journal, 13 (3), 71–78. doi: https://doi.org/10.2478/v10304-012-0032-6
  14. Saharova, N. A., Kuzmichev, V. E., Ni Tsan (2013). Forecasting of indicators of dresses outline shape under their patterns. Izvestiya vuzov. Tehnologiya tekstil'noy promyshlennosti, 4 (346), 92–99. Available at: https://ttp.ivgpu.com/wp-content/uploads/2015/10/346_24.pdf
  15. Seleznova, A. V., Slavinska, A. L. (2012). Obgruntuvannia strukturnykh elementiv poverkhni manekena dlia pobudovy rozghortky korseta pobutovoho pryznachennia. Visnyk KhNU, 4, 169–172. Available at: http://journals.khnu.km.ua/vestnik/pdf/tech/2012_4/34sel.pdf
  16. Dubinetska, H., Ostapenko, N., Luzker, T., Navolska, L. (2016). The systematization of wedding apparel in terms of transformation principles. Visnyk KhNTU, 2 (57), 123–135. Available at: https://er.knutd.edu.ua/bitstream/123456789/3136/1/20161114_Dubinetska_P123-135.pdf
  17. Seleznova, A. V. (2013). Analiz zminiuvannia stylovykh rishen formy zhinochoho korseta. Visnyk KhNU, 1, 216–219. Available at: http://journals.khnu.km.ua/vestnik/pdf/tech/2013_1/43sel.pdf
  18. Zakharkevich, O. V., Kuleshova, S. G. (2017). Development of the method of scaling patterns and virtual garments forms. Vlakna a Textil, 24 (4), 34–40.
  19. Slavinska, A. L., Syrotenko, O. P., Kuleshova, S. G., Zakharkevich, O. V. (2019). Algorithms to assess by criteria the harmony of the typological ranges of cutting lines in clothes. The first branch conference “Tendencies and innovations in the textile and fashion industry”, 1, 11–18. Available at: https://tok-bg.org/vol1_2019full.pdf
  20. Selezneva, A. V., Slavinskaya, A. L. (2014). Designing effect of woman's figure, created corset, consider psikhofiziologic comfort. Izvestiya vysshih uchebnyh zavedeniy. Tehnologiya tekstil'noy promyshlennosti, 2 (350), 102–106. Available at: https://ttp.ivgpu.com/wp-content/uploads/2015/10/350_24.pdf
  21. Krasnyuk, L. V., Troyan, O. M., Yancalowskiy, O. Y., Torokanets, V. S. (2016). Prospects for the creation of multifunctional garments based on biologically active points and biologically active zones of the human body. Herald of Khmelnytskyi national university, 5, 110–115. Available at: http://elar.khnu.km.ua/jspui/bitstream/123456789/5272/1/6.pdf
  22. Shammut, Yu. A., Kornilov, N. L., Balandina, G. V. (2008). Razrabotka trehmernoy komp'yuternoy modeli torsa figury dlya proektirovaniya plotnooblegayushchih izdeliy. Izvestiya vuzov. Tehnologiya tekstil'noy promyshlennosti, 4, 79–82.
  23. Belzetskyi, R. S., Sierhieieva, V. V., Dupliak, V. D. (2010). Porivnialnyi analiz suchasnykh metodiv elektropunkturnoi diahnostyky. Vymiriuvalna ta obchysliuvalna tekhnika v tekhnolohichnykh protsesakh, 2, 168–171.
  24. Tutova, A. A., Petrosova, I. A., Guseva, M. A., Andreeva, E. G. (2015). Construction features of three-dimensional clothes mannequin model according to three-dimensional scanning. Modern problems of science and education, 2-1. Available at: http://www.science-education.ru/ru/article/view?id=20400
  25. Liu, R., Guo, X., Lao, T. T., Little, T. (2017). A critical review on compression textiles for compression therapy: Textile-based compression interventions for chronic venous insufficiency. Textile Research Journal, 87 (9), 1121–1141. doi: https://doi.org/10.1177/0040517516646041
  26. Slavinskaya, A., Dombrovska, O., Mytsa, V., Koshevko, J., Dombrovskyi, A., Ivanishena, T. (2020). Method of control of the compatibility of the children's clothing design using coefficients of dimentional features gradation. Fibres and Textiles, 27 (1), 76–86. Available at: http://vat.ft.tul.cz/2020/1/VaT_2020_1_12.pdf
  27. Kyzymchuk, O., Zdorenko, V. (2013). Geometric models of auxetic materials. Visnyk KNUTD, 3, 104–111. Available at: https://er.knutd.edu.ua/bitstream/123456789/1619/1/V71_P104-111.pdf

Downloads

Published

2020-10-31

How to Cite

Slavinska, A., Syrotenko, O., Mytsa, V., & Dombrovska, O. (2020). Development of an adaptive method for regulating corset comfort based on the parameters of design zones identification. Eastern-European Journal of Enterprise Technologies, 5(1 (107), 71–81. https://doi.org/10.15587/1729-4061.2020.211997

Issue

Vol. 5 No. 1 (107) (2020): Engineering technological systems

Section

Engineering technological systems

License

Copyright (c) 2020 Alla Slavinska, Oksana Syrotenko, Victoriia Mytsa, Oksana Dombrovska

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.