Влияние угла выхода лопатки насосного колеса на параметры внешней характеристики гидротрансформатора

Authors

  • В. Г. Неня Сумской государственный университет ул. Р.- Корсакова, 2, г. Сумы, Украина, 40007, Ukraine
  • Ю. М. Кухтенков Национальный технический университет «Харьковский политехнический институт» ул. Фрунзе, 21, г. Харьков, Украина, 61002, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2009.22437

Keywords:

torque converter, pump (impeller) wheel, mathematical model

Abstract

This article contain the mathematical modeling of main parameters the torque converters external characteristics type Allison. Changing parameters of torque converters are realised due to pump (impeller) exit blade angle. The analysis comparison the theoretical result with experimental data is carried out

Author Biographies

В. Г. Неня, Сумской государственный университет ул. Р.- Корсакова, 2, г. Сумы, Украина, 40007

Кандидат технических наук, доцент

Ю. М. Кухтенков, Национальный технический университет «Харьковский политехнический институт» ул. Фрунзе, 21, г. Харьков, Украина, 61002

Кандидат технических наук
Кафедра «Гидравлические машины»

References

  1. Fujita, K., Akagi, S., Sasaki, Y., Kawamura, S., Saka T. and Hirata, T. : «Multi-Objective Optimal Design of Vehicle Power Train – Optimization of Torque Converter Geometry» Transactions of the Japan Society of Mechanical Engineers, Ser. C, Vol. 62, No. 594, (Feb. 1996), p. 802-808.
  2. Giwoo Kim, Jaeduk Jang «Effects of Stator Shapes on Hydraulic Performances of an Automotive Torque Converter with a Squashed Torus» / Society of Automotive Engineers, – 2002-01-0886.
  3. Jean Schweitzer, Jeya Gandham «Computational Fluid Dynamics in Torque Converters: Validation and Application» / International Journal of Rotating Machinery, 2003, –№9, – р. 411–418.
  4. P. O. Sweger, C. L. Anderson, and J. R. Blough «Measurements of Strain on 310 mm Torque Converter Turbine Blades» / International Journal of Rotating Machinery, – 2004, – №10, – р. 55–63.
  5. Sehyun Shin, In-Cheol Bae, In-Sik Joo, Hong-Hae Hong, Tae-kyung LeeSeoul «The effect of blade geometry on the performance of an automotive torque converter» / FISITA World Automotive Congress. – 2000.
  6. Харитонов С. А. Автоматические коробки передач / Харитонов С. А. – М.: АСТ, 2003. – 480 с.
  7. Лаптев Ю. Н. Автотракторные гидротрансформаторы / Юрий Николаевич Лаптев. – М.: Машиностроение, 1973. – 280 с.
  8. Трусов С. М. Автомобильные гидротрансформаторы / Сергей Михайлович Трусов. – М.: Машиностроение, 1977. – 272 с.
  9. Завьялов П. С. Учет прозрачности гидродинамических решеток при расчете внешних характеристик гидротрансформаторов / Завьялов П. С. // Гидравлические машины: Сб. научн. трудов. – К.: Техніка. – 1967. – №1. – С.143–150.
  10. Карцев Л. В. Гидродинамические передачи. Ч.2: Теория и расчет гидродинамических трансформаторов / Лев Васильевич Карцев. – М.: МГТУ, 2000. – 156 с.
  11. Алексапольский Д. Я. Гидродинамические передачи / Дмитрий Яковлевич Алексапольский. – Л.: МашГиз, 1963. – 272 с.

Downloads

Published

2009-08-20

How to Cite

Неня, В. Г., & Кухтенков, Ю. М. (2009). Влияние угла выхода лопатки насосного колеса на параметры внешней характеристики гидротрансформатора. Eastern-European Journal of Enterprise Technologies, 4(10(40), 55–57. https://doi.org/10.15587/1729-4061.2009.22437

Issue

Vol. 4 No. 10(40) (2009): Applied physics and Materials Science. Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 В. Г. Неня, Ю. М. Кухтенков

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.