Quarrel technololgy studying of microstructure optic fibers

Authors

  • Александр Иванович Филипенко Харьковский национальный университет радиоэлектроники Пр. Ленина, 14, г. Харьков, Украина, 61166, Ukraine
  • Анастасия Вячеславовна Бакайся Харьковский национальный университет радиоэлектроники Пр. Ленина, 14, г. Харьков, Украина, 61166, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2009.5963

Abstract

The problem of fusion of microstructured optical fibers with single-mode fibers is considered. The basic causes of loss: welding diameter mismatch of mode field and the complete destruction of the air holes are investigated. A variety of ways to connect depending on the structure of microstructured fibers are offered

Author Biographies

Александр Иванович Филипенко, Харьковский национальный университет радиоэлектроники Пр. Ленина, 14, г. Харьков, Украина, 61166

Доктор технических наук, профессор кафедры технологии и автоматизации производства радиоэлектронных и электронно-вычислительных средств

Анастасия Вячеславовна Бакайся, Харьковский национальный университет радиоэлектроники Пр. Ленина, 14, г. Харьков, Украина, 61166

Студентка

References

  1. Limin Xiao, M. S. Demokan, Wei Jin, Yiping Wang, Chun-Liu Zhao, «Fusion splicing photonic crystal fibers and conventional single-mode fibers: microhole collapse effect», Journal of lightwawe technology, vol. 25, no.11 (2007).
  2. J. H. Chong and M. K. Rao, “Development of a system for laser splicing photonic crystal fiber,” Opt. Express, vol. 11, no. 12, pp. 1365–1370 (2003).
  3. B. Bourliaguet, C. Pare, F. Emond, A. Croteau, A. Proulx, and R. Vallee, “Microstructured fiber splicing,” Opt. Express, vol. 11, no. 25, pp. 3412–3417(2003).
  4. А.М. Желтиков Оптика микроструктурированных волокон. М.:Наука, 2004. – 281с.

Downloads

Published

2009-04-01

How to Cite

Филипенко, А. И., & Бакайся, А. В. (2009). Quarrel technololgy studying of microstructure optic fibers. Eastern-European Journal of Enterprise Technologies, 2(5(38), 15–17. https://doi.org/10.15587/1729-4061.2009.5963

Issue

Vol. 2 No. 5(38) (2009): Applied physics and materials science

Section

Applied physics

License

Copyright (c) 2014 Александр Иванович Филипенко, Анастасия Вячеславовна Бакайся

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.