Section Details


Materials Science

 
Issue Title
 
Vol 6, No 12 (108) (2020): Materials Science Failure analysis of geothermal perforated casing tubing in H2S and O2 containing environment Abstract   PDF
Harris Prabowo, Yudha Pratesa, Askin Tohari, Ali Mudakir, Badrul Munir, Johny W. Soedarsono
 
Vol 6, No 12 (108) (2020): Materials Science Analysis of the effects of alloying with Si and Cr on the properties of manganese austenite based on AB INITIO modelling Abstract   PDF
Pavlo Prysyazhnyuk, Liubomyr Shlapak, Iryna Semyanyk, Volodymyr Kotsyubynsky, Liubomyr Troshchuk, Sergiy Korniy, Volodymyr Artym
 
Vol 6, No 12 (108) (2020): Materials Science An analysis of coil dimensions on induction heating machine against microstructure and hardness distribution as new candidate of projectile-resistant steel plates materials Abstract   PDF
Helmy Purwanto, Mohammad Tauviqirrahman, Muhammad Dzulfikar, Rifky Ismail, Purnomo Purnomo, Ahnas Syifauddin
 
Vol 6, No 12 (108) (2020): Materials Science Comparative analysis of the fatigue contact strength of surfaces hardened by cementation and the ion-plasma nitriding Аvinit N Abstract   PDF
Alex Sagalovych, Viktor Popov, Vladislav Sagalovуch, Stanislav Dudnik, Vladimir Bogoslavzev, Nik Stadnichenko, Andrey Edinovych
 
Vol 6, No 12 (108) (2020): Materials Science Identification of regularities of formation of the phase-structural state and properties of coatings obtained by micro-arc oxidation of high-strength V95 alloy Abstract   PDF
Valeria Subbotinа, Oleg Sоbоl, Valery Belozerov
 
Vol 6, No 12 (108) (2020): Materials Science Designing brazing filler metal for heat-resistant alloys based on NI3AL intermetallide Abstract   PDF
Viktor Kvasnytskyi, Volodymyr Korzhyk, Viacheslav Kvasnytskyi, Heorhii Mialnitsa, Chunlin Dong, Tetiana Pryadko, Maksym Matviienko, Yevhen Buturlia
 
Vol 6, No 12 (108) (2020): Materials Science Estimation of the effect of redox treatment on microstructure and tendency to brittle fracture of anode materials of YSZ–NiO(Ni) system Abstract   PDF
Bogdan Vasyliv, Volodymyr Kulyk, Zoia Duriagina, Dariusz Mierzwinski, Taras Kovbasiuk, Tetiana Tepla
 
Vol 6, No 12 (108) (2020): Materials Science Investigation of the anodic behavior of w-based superalloy for electrochemical selective treatment Abstract   PDF
Vadym Kovalenko, Valerii Kotok
 
Vol 5, No 12 (107) (2020): Materials Science An experimental analysis of the influence of electrolyte compositions, current density and duration of the micro­arc oxidation process on the structural­phase state and properties of VT3­1 titanium alloy Abstract   PDF   PDF (Русский)
Valeria Subbotinа, Oleg Sоbоl, Valery Belozerov, Valentin Shnayder, Oleksandr Smyrnov
 
Vol 5, No 12 (107) (2020): Materials Science Strength and chemical resistance of composites based on epoxy resins, filled with gypsum in the original and water­hardened forms Abstract   PDF   PDF (Русский)
Dmitro Starokadomsky, Dmitry Rassokhin, Anatoly Ishchenko, Nadia Sigareva, Maria Reshetnyk
 
Vol 5, No 12 (107) (2020): Materials Science Design and study of nanomodified composite fluoropolymer materials for tribotechnical purposes Abstract   PDF   PDF (Українська)
Aleksandr Dykha, Vladyslav Svidersky, Igor Danilenko, Viktor Bilichenko, Yuri Kukurudzyak, Ludmila Kirichenko
 
Vol 5, No 12 (107) (2020): Materials Science Design of mated parts using polymeric materials with enhanced tribotechnical characteristics Abstract   PDF   PDF (Українська)
Anatolii Kobets, Viktor Aulin, Oleksii Derkach, Dmytro Makarenko, Andrii Hrynkiv, Dmytro Krutous, Evgeniy Muranov
 
Vol 5, No 12 (107) (2020): Materials Science Anticorrosive protection of structures in robust design Abstract   PDF   PDF (Русский)
Oleksandr Gibalenko, Victoriia Gibalenko, Olena Bocharova
 
Vol 5, No 12 (107) (2020): Materials Science Identifying the features of structural and phase transformations in processing the waste of metallurgical products doped with refractory elements Abstract   PDF   PDF (Українська)
Vadym Volokh, Endar Kim, Tetiana Fesenko, Artem Petryshchev, Sergey Artemev, Bohdan Tsymbal, Lesia Makarenko, Andrii Hedzyk, Volodymyr Slabko, Vasyl Khmelovskyi
 
Vol 5, No 12 (107) (2020): Materials Science Determination of the applicability of Zn­Al layered double hydroxide, intercalated by food dye Orange Yellow S, as a cosmetic pigment Abstract   PDF   PDF (Русский)
Vadym Kovalenko, Valerii Kotok
 
Vol 5, No 12 (107) (2020): Materials Science Development of technologies for hot pressing of rods made from 7075 aluminum alloy on a radial­shear mill of a new design – numerical modeling Abstract   PDF
Serik Mashekov, Yerik Nugman, Aigerim Mashekova, Aimangul Sekerbek, Nurbolat Sembayev, Symbat Akparova
 
Vol 5, No 12 (107) (2020): Materials Science Controller of fluorine­doped tin oxide thin films deposition via cycles and annealing temperatures by spin coating techniques Abstract   PDF
Tri Arini, Latifa Hanum Lalasari, Lia Andriyah, Nadia Natasha, Fariza Yunita, Florentinus Firdiyono, Adjie Maulana Syaputra, Amalia Solehah, Achmad Subhan
 
Vol 5, No 12 (107) (2020): Materials Science Comparison of the structure and properties between single quench+temper and double quench+temper of medium­carbon and carbon­manganese steel Abstract   PDF
Yurianto Yurianto, Sulardjaka Sulardjaka, Susilo Adi Widyanto, Padang Yanuar
 
Vol 4, No 12 (106) (2020): Materials Science In situ formation of molybdenum borides at hardfacing by arc welding with flux-cored wires containing a reaction mixture of B4C/Mo Abstract   PDF   PDF (Українська)
Pavlo Prysyazhnyuk, Liubomyr Shlapak, Olexandr Ivanov, Sergiy Korniy, Lyubomyr Lutsak, Myroslav Burda, Iryna Hnatenko, Vasyl Yurkiv
 
Vol 4, No 12 (106) (2020): Materials Science Changes in the nickel hydroxide properties under the influence of thermal field in situ and ex situ during electrochemical synthesis Abstract   PDF   PDF (Русский)
Vadym Kovalenko, Valerii Kotok
 
Vol 4, No 12 (106) (2020): Materials Science A study of the phase-structural engineering possibilities of coatings on D16 alloy during micro-arc oxidation in electrolytes of different types Abstract   PDF   PDF (Русский)
Valeria Subbotinа, Oleg Sоbоl, Valery Belozerov, Alexander Subbotin, Yuliya Smyrnova
 
Vol 4, No 12 (106) (2020): Materials Science An analysis of using the method of two-dimensional digital image correlation in glass column research Abstract   PDF   PDF (Українська)
Bogdan Demchyna, Mykhailo Surmai, Roman Tkach, Vasylyna Hula, Roman Kozak
 
Vol 4, No 12 (106) (2020): Materials Science Developing the modification of nickel cathodes for applying the ion-plasma coatings on the parts of aircraft engines Abstract   PDF   PDF (Русский)
Vladimir Yefanov, Oleksandr Ovchynnykov, Oleksandr Dzhuhan, Ihor Petrik, Dmytro Raspornia, Oleksii Kapustian, Yehor Saprykin
 
Vol 4, No 12 (106) (2020): Materials Science Temperature effect on the thermal-physical properties of fire-protective mineral wool cladding of steel structures under the conditions of fire resistance tests Abstract   PDF   PDF (Українська)
Serhii Pozdieiev, Oleksandr Nuianzin, Olena Borsuk, Oksana Binetska, Andrii Shvydenko, Bogdan Alimov
 
Vol 4, No 12 (106) (2020): Materials Science Influence of phase transitions on the temperature behavior of photoluminescence spectra in a (N(CH3)4)2MnCl4 crystal Abstract   PDF   PDF (Русский)
Hryhorii Ilchuk, Andrii Kashuba, Ivan Kuno, Sergey Sveleba, Taras Malyi, Roman Petrus, Volodymyr Tsiumra, Ihor Semkiv
 
1 - 25 of 308 Items 1 2 3 4 5 6 7 8 9 10 > >>