@article{Zelenyak_Klapchuk_Kolyasa_Oryshchyn_Vozna_2021, title={Determining patterns in thermoelastic interaction between a crack and a curvilinear inclusion located in a circular plate}, volume={6}, url={https://journals.uran.ua/eejet/article/view/243990}, DOI={10.15587/1729-4061.2021.243990}, abstractNote={<p>A two-dimensional mathematical model of the thermoelastic state has been built for a circular plate containing a curvilinear inclusion and a crack, under the action of a uniformly distributed temperature across the entire piece-homogeneous plate. Using the apparatus of singular integral equations (SIEs), the problem was reduced to a system of two singular integral equations of the first and second kind on the contours of the crack and inclusion, respectively. Numerical solutions to the system of integral equations have been obtained for certain cases of the circular disk with an elliptical inclusion and a crack in the disk outside the inclusion, as well as within the inclusion. These solutions were applied to determine the stress intensity coefficients (SICs) at the tops of the crack.</p> <p>Stress intensity coefficients could later be used to determine the critical temperature values in the disk at which a crack begins to grow. Therefore, such a model reflects, to some extent, the destruction mechanism of the elements of those engineering structures with cracks that are operated in the thermal power industry and, therefore, is relevant.</p> <p>Graphic dependences of stress intensity coefficients on the shape of an inclusion have been built, as well as on its mechanical and thermal-physical characteristics, and a distance to the crack. This would make it possible to analyze the intensity of stresses in the neighborhood of the crack vertices, depending on geometric and mechanical factors.</p> <p>The study’s specific results, given in the form of plots, could prove useful in the development of rational modes of operation of structural elements in the form of circular plates with an inclusion hosting a crack.</p> <p>The reported mathematical model builds on the earlier models of two-dimensional stationary problems of thermal conductivity and thermoelasticity for piece-homogeneous bodies with cracks.</p>}, number={7 (114)}, journal={Eastern-European Journal of Enterprise Technologies}, author={Zelenyak, Volodymyr and Klapchuk, Myroslava and Kolyasa, Lubov and Oryshchyn, Oksana and Vozna, Svitlana}, year={2021}, month={Dec.}, pages={52–58} }