Vol. 4 No. 1 (106) (2020): Engineering technological systems

Engineering technological systems

• Selecting the mutual arrangement of the engine and wing in a transport aircraft for short take-off and landing

  Vоlоdymyr Kudryavtsev, Borys Strigun, Volodymyr Shmyrov, Vasiliy Loginov

  6-16

  • PDF

• Development of a technique for the geometrical modeling of conjugated surfaces when determining the geometrical parameters of an engagement surface contact in kinematic pairs

  Nelli Ismailova, Valentyn Bogach, Borys Lebedev

  17-22

  • PDF

• Determining efficient operating modes and sizes of blades for multi-scraper trench excavators

  Svyatoslav Kravets, Vladimir Suponyev, Aleksej Goponov, Serhii Kovalevskyi, Andrii Koval

  23-28

  • PDF

• Patterns of influence exerted by the side walls of a vibratory sieve on the motion of a loose mixture flow

  Mykhailo Piven, Aleksandr Spolnik, Tatiana Sychova, Alona Piven

  29-38

  • PDF

• Establishing the effect of decreased power intensity of self-oscillatory grinding in a tumbling mill when the crushed material content in the intra-chamber fill is reduced

  Kateryna Deineka, Yuriy Naumenko

  39-48

  • PDF

• Development of the single-setup milling process model of the shaft support necks and cams

  Vitalii Kalchenko, Volodymyr Kalchenko, Natalia Sira, Olga Kalchenko, Volodymyr Vynnyk, Dmytro Kalchenko, Volodymyr Morochko

  48-54

  • PDF

• Predicting the shape formation of hollow parts with a flange in the process of combined radial-reverse extrusion

  Natalia Hrudkina, Leila Aliieva, Oleg Markov, Irina Marchenko, Alexander Shapoval, Payman Abhari, Mariia Kordenko

  55-62

  • PDF

• Identification of regularities of changes in energy-power parameters depending on the design of the roller node of a new radial-shear mill by computer simulation

  Serik Mashekov, Adilzhan Eleuovich Nurtazayev, Aigerim Mashekova, Yerik Nugman, Ulan Angarbekov

  63-71

  • PDF

• A study of fibre bundles’ formation regularities during the impact interaction of spikes with raw cotton particles

  Fazil Veliev

  72-79

  • PDF

• Defining technological features in the manufacture of semi-hard book covers

  Oleksandr Paliukh, Petro Kyrychok, Ruslan Trishchuk, Maxym Korobka, Yevhenii Dziadyk

  80-90

  • PDF

• Designing a new wood-composite material made from logging waste

  Olena Pinchevska, Yurii Lakyda, Olha Baranova, Mykhailo Biletskyi, Valentin Holovach, Rostyslav Oliinyk, Andrii Yeroshenko

  91-97

  • PDF