Sergey Ignatovich

National Aviation University, Ukraine
Doctor of technical sciences, Professor
Department of aircraft construction

Scopus profile: link
Researcher ID: Q-4479-2019
Google Scholar profile:
link
ID ORCID: https://orcid.org/0000-0001-9322-2195

Selected Publications:

  1. Gavrylov, I., Karuskevich, M., Ignatovich, S., Yutskevych, S., Maslak, T. (2021). Influence of corrosion preventive compounds on the friction force in aircraft lap joints. Fatigue & Fracture of Engineering Materials & Structures, 45 (3), 938–941. Portico. doi: https://doi.org/10.1111/ffe.13621

  2. Ignatovich, S., Yutskevych, S., Makarov, I. (2022). Features of aircraft structures corrosion damage during storage under COVID-19 restrictions. Procedia Structural Integrity, 36, 66–70. doi: https://doi.org/10.1016/j.prostr.2022.01.004 

  3. Mechnik, V. А., Kolodnitskyi, V. М., Zakiev, І. М., Zakiev, V. І., Ignatovich, S. R., Іsonkin, О. М. (2021). Influence of CrB2 Powder on the Physicomechanical Properties of Fe–Cu–Ni–Sn Composites Sintered By Vacuum Hot Pressing. Materials Science, 56 (6), 852–861. doi: https://doi.org/10.1007/s11003-021-00504-7 

  4. Mechnik, V. A., Bondarenko, N. A., Kolodnitskyi, V. M., Zakiev, V. I., Zakiev, I. M., Ignatovich, S. R. et. al. (2020). Effect of Vacuum Hot Pressing Temperature on the Mechanical and Tribological Properties of the Fe–Cu–Ni–Sn–VN Composites. Powder Metallurgy and Metal Ceramics, 58 (11-12), 679–691. doi: https://doi.org/10.1007/s11106-020-00125-w 

  5. Mechnik, V. A., Bondarenko, N. A., Kolodnitskyi, V. M., Zakiev, V. I., Zakiev, I. M., Ignatovich, S. R. et. al. (2019). Formation of Fe-Cu-Ni-Sn-VN Nanocrystalline Matrix by Vacuum Hot Pressing for Diamond-Containing Composite. Mechanical and Tribological Properties. Journal of Superhard Materials, 41 (6), 388–401. doi: https://doi.org/10.3103/s1063457619060030 

  6. Ignatovich, S. R., Karuskevych, M. V., Yutskevych, S. S., Khyznyak, S. V. (2019). Deformation relief and destruction of surface as an aluminum alloy clad layer fatigue damage indicator. Aerospace technic and technology, 8, 99–104. doi: https://doi.org/10.32620/aktt.2019.8.15 

  7. Makarov, I. A., Ignatovich, S. R. (2019). Selection and optimization of fuselage components for modern airplanes. Aerospace Technic and Technology, 7, 12–20. doi: https://doi.org/10.32620/aktt.2019.7.02 

  8. Ignatovich, S. R., Bouraou, N. I. (2019). Power Law of Crack Length Distribution in the Multiple Damage Process. Strength of Materials, 51 (5), 735–745. doi: https://doi.org/10.1007/s11223-019-00122-4 

  9. Ignatovich, S., Karuskevich, M., Yutskevych, S. (2017). Evolution of the deformation relief on the surface of a clad aluminum alloy at random cyclic loads. International Journal of Fatigue, 101, 45–50. doi: https://doi.org/10.1016/j.ijfatigue.2017.03.013 

  10. Ignatovich, S. R., Krasnopol’skii, V. S. (2017). Probabilistic Distribution of Crack Length in the Case of Multiple Fracture. Strength of Materials, 49 (6), 760–768. doi: https://doi.org/10.1007/s11223-018-9921-9 

  11. Karuskevich, M. V., Ignatovich, S. R., Maslak, .P., Menou, A., Maruschak, P. ., Panin, S. V., Berto, F. (2016). Multi-purpose fatigue sensor. Part 2. Physical backgrounds for damages accumulation and parameters of their assessment. Frattura Ed Integrità Strutturale, 10 (38), 205–214. doi: https://doi.org/10.3221/igf-esis.38.28 

  12. Karuskevich, M. V., Ignatovich, S. R., Maslak, .P., Menou, A., Maruschak, P. ., Panin, S. V., Berto, F. (2016). Multi-purpose fatigue sensor. Part 1. Uniaxial and multiaxial fatigue. Frattura Ed Integrità Strutturale, 10 (38), 198–204. doi: https://doi.org/10.3221/igf-esis.38.27