Research into mutual influence of inclusion on the chain of pores in the welded seam under the influence of thermo-force loading

Authors

DOI:

https://doi.org/10.15587/1729-4061.2016.72040

Keywords:

inclusion, pore, crack, deformation, stress, mounting, welded seam, temperature load, gas jet

Abstract

Geometric characteristics of the inclusion to the chain of pores in the weld under the conditions of asymmetrical thermo force loading were studied. The dependence of an acute angle of the inclusion on the crack opening in the weld seam is explored. The dependence of the scheme of mounting of a construction on the crack opening in the weld was studied. A method based on the method of the finite elements of determining a stress-strained state in the weld in the pore and inclusion was developed. The method makes it possible to estimate in space mutual influence of the inclusion on the origin and crack opening in the pore. This method will make it possible to increase the period of operation of the welded seams.

The special feature of the studies is in creating different loads by time, by the depth of the plates, by the length of the plates and welded seams. The analysis of a stress-strain state of a welded seam in all stages of the loading before full cooling of the structure was examined.

A study of different methods of the load application was carried out. The authenticity of results is determined by the use of engineering methods.

It follows from the obtained results for the pores with diameter of 2.5 mm:   a pore and an inclusion in a similar welded seam do not substantially influence each other, the maximal stresses of σeqv1=3350 kgs/cm2 will not lead to crack opening near the pores. The maximal stresses of σeqv2=3500 kgs/cm2 will lead to the crack opening near the inclusion.

In the implementation of the distance between the pore and the inclusion L=  0,875 mm with the diameter of pores of 3.0 mm, prerequisite for a crack opening will arise from the inclusion to the pore for the scheme of rigid mounting of the base of the construction.

In the pore with the diameter of 3.0 of mm, exposed to maxima; temperature, the tension exceeding the adopted σeqv1=3600 kgs/cm2. In the nodes around the inclusion the process of crack opening will occur.

Author Biographies

Elena Strelnikova, A. N. Podgorny Institute of Mechanical Engineering Problems NAS of Ukraine D. Pozharskogo str., 2/10, Kharkiv, Ukraine, 61046

Doctor of Technical Sciences, Professor, Senior Researcher

Department of Strength and Optimization

Oleg Kovch, Yuzhnoye design office Krivorozhskaja str., 3, Dnipropetrovsk, Ukraine, 49008

Engineer

References

  1. Velykoyvanenko, E. A., Rozinka, H. F., Mylenyn, A. S., Pyvtorak, N. Y. (2013). Modelyrovanye protsessov zarozhdenyia y razvytyia por viazkoho razrushenyia v svarnikh konstruktsyiakh. Avtomatycheskaia svarka, 9, 26–31.
  2. Kyt, H. S., Khai, M. V. (1982). Opredelenye trekhmernikh temperaturnikh polei y napriazhenyi v beskonechnom tele s razrezamy. Yzv. AN SSSR. Mekhanyka tverdoho tela, 5, 60–67.
  3. Salehi, I., Kapoor, A., Mutton, P. (2011). Multi-axial fatigue analysis of aluminothermic rail welds under high axle load conditions. International Journal of Fatigue, 33 (9), 1324–1336. doi: 10.1016/j.ijfatigue.2011.04.010
  4. Minak, G., Ceschini, L., Boromei, I., Ponte, M. (2010). Fatigue properties of friction stir welded particulate reinforced aluminium matrix composites. International Journal of Fatigue, 32 (1), 218–226. doi: 10.1016/j.ijfatigue.2009.02.018
  5. Moreira, P. M. G. P., de Oliveira, F. M. F., de Castro, P. M. S. T. (2008). Fatigue behaviour of notched specimens of friction stir welded aluminium alloy 6063-T6. Journal of Materials Processing Technology, 207 (1-3), 283–292. doi: 10.1016/j.jmatprotec.2007.12.113
  6. Wang, Y., Bergström, J., Burman, C. (2009). Thermal fatigue behavior of an iron-based laser sintered material. Materials Science and Engineering: A, 513-514, 64–71. doi: 10.1016/j.msea.2009.01.053
  7. Altukhov, E. V., Metod, Y. Y. (2005). Vorovycha v trekhmernoi teoryy termodynamyky plastyn. Teoret. y prykl. mekhanyka, 41, 3–8.
  8. Nian Nhuen, Ruban, A. N. (2015). Vlyianye defektov svarnikh shvov na mekhanycheskye svoistva korpusnoi staly, opredeliaemie pry statycheskom nahruzhenyia. Vestnyk AHTU. Ser. Morskaia tekhnyka y tekhnolohyia, 2, 13‑21.
  9. Serenko, A. N. (2011). Otsenka vlyianyia ostatochnikh napriazhenyi na kynetyku razvytyia ustalostnikh treshchyn v svarnikh soedynenyiakh. Visnyk Pryazovskoho derzhavnoho tekhnichnoho universytetu, 22, 156‑161.
  10. Novatskyi, V. (1970). Dynamycheskye zadachy termoupruhosty. Moscow: Myr, 256.
  11. Shymkovych, D. H. (2001). Raschet konstruktsyi v MSC/NASTRAN for Windows. Moscow: DMK Press, 448.
  12. Kovch, O. Y. (2013). Yssledovanye prochnosty svarnikh shvov metodom konechnikh elementov. Vesnyk Khersonskoho natsyonalnoho tekhnycheskoho unyversyteta, 2, 159‑162.

Downloads

Published

2016-06-30

How to Cite

Strelnikova, E., & Kovch, O. (2016). Research into mutual influence of inclusion on the chain of pores in the welded seam under the influence of thermo-force loading. Eastern-European Journal of Enterprise Technologies, 3(7(81), 9–14. https://doi.org/10.15587/1729-4061.2016.72040

Issue

Vol. 3 No. 7(81) (2016): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2016 Elena Strelnikova, Oleg Kovch

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.