Vasily Efremenko

State Higher Educational Institution "Priazoivskyi State Technical University", Ukraine
Doctor of Technical Sciences, Professor, Head of Department
Department of Physics

Scopus profile: link
Researcher ID: R-7142-2016
Google Scholar profile: link
ID ORCID: http://orcid.org/0000-0002-4537-6939

Selected Publications:

  1. Efremenko, V. G., Chabak, Yu. G., Shimizu, K., Golinskyi, M. A., Lekatou, A. G., Petryshynets, I. et al. (2023). The novel hybrid concept on designing advanced multi-component cast irons: Effect of boron and titanium (Thermodynamic modelling, microstructure and mechanical property evaluation). Materials Characterization, 197, 112691. doi: https://doi.org/10.1016/j.matchar.2023.112691 

  2. Efremenko, V. G., Lekatou, A. G., Chabak, Yu. G., Efremenko, B. V., Petryshynets, I., Zurnadzhy, V. I. et al. (2023). Micromechanical, corrosion and wet sliding wear behaviours of Co-28Cr-6Mo alloy: Wrought vs. LPBF. Materials Today Communications, 35, 105936. doi: https://doi.org/10.1016/j.mtcomm.2023.105936 

  3. Chabak, Y., Petryshynets, I., Efremenko, V., Golinskyi, M., Shimizu, K., Zurnadzhy, V. et al. (2023). Investigations of Abrasive Wear Behaviour of Hybrid High-Boron Multi-Component Alloys: Effect of Boron and Carbon Contents by the Factorial Design Method. Materials, 16 (6), 2530. doi: https://doi.org/10.3390/ma16062530 

  4. Purba, R. H., Kusumoto, K., Shimizu, K., Efremenko, V. (2023). Erosive Wear Behavior of Novel Hybrid Multicomponent Cast Alloys with Different C and B Contents. Lubricants, 11 (6), 243. doi: https://doi.org/10.3390/lubricants11060243 

  5. Chabak, Y., Efremenko, V., Zurnadzhy, V., Puchý, V., Petryshynets, I., Efremenko, B. et. al. (2022). Structural and Tribological Studies of “(TiC + WC)/Hardened Steel” PMMC Coating Deposited by Air Pulsed Plasma. Metals, 12 (2), 218. doi: https://doi.org/10.3390/met12020218 

  6. Efremenko, B. V., Zurnadzhy, V. I., Chabak, Yu. G., Efremenko, V. G., Kudinova, K. V., Mazur, V. A. (2022). A comparison study on the effect of counter ball material on sliding wear response of SLM-printed biomedical 316L steel. Materials Today: Proceedings. doi: https://doi.org/10.1016/j.matpr.2022.07.112 

  7. Zurnadzhy, V. I., Efremenko, V. G., Wu, K. M., Lekatou, A. G., Shimizu, K., Chabak, Y. G. et. al. (2020). Quenching and Partitioning–Based Heat Treatment for Rolled Grinding Steel Balls. Metallurgical and Materials Transactions A, 51 (6), 3042–3053. doi: https://doi.org/10.1007/s11661-020-05737-w 

  8. Zurnadzhy, V. I., Efremenko, V. G., Wu, K. M., Petryshynets, I., Shimizu, K., Zusin, A. M. et. al. (2020). Tailoring strength/ductility combination in 2.5 wt% Si-alloyed middle carbon steel produced by the two-step Q-P treatment with a prolonged partitioning stage. Materials Science and Engineering: A, 791, 139721. doi: https://doi.org/10.1016/j.msea.2020.139721 

  9. Efremenko, B. V., Shimizu, K., Espallargаs, N., Efremenko, V. G., Kusumoto, K., Chabak, Y. G. et. al. (2020). High-temperature solid particle erosion of Cr–Ni–Fe–C arc cladded coatings. Wear, 460-461, 203439. doi: https://doi.org/10.1016/j.wear.2020.203439 

  10. Kusumoto, K., Shimizu, K., Efremenko, V. G., Hara, H., Shirai, M., Ito, J. et. al. (2019). Three body type abrasive wear characteristics of multi-component white cast irons. Wear, 426-427, 122–127. doi: https://doi.org/10.1016/j.wear.2019.01.108 

  11. Efremenko, V. G., Hesse, O., Friedrich, T., Kunert, M., Brykov, M. N., Shimizu, K. et. al. (2019). Two-body abrasion resistance of high-carbon high-silicon steel: Metastable austenite vs nanostructured bainite. Wear, 418-419, 24–35. doi: https://doi.org/10.1016/j.wear.2018.11.003 

  12. Zurnadzhy, V. I., Efremenko, V. G., Wu, K. M., Azarkhov, A. Y., Chabak, Y. G., Greshta, V. L. et. al. (2019). Effects of stress relief tempering on microstructure and tensile/impact behavior of quenched and partitioned commercial spring steel. Materials Science and Engineering: A, 745, 307–318. doi: https://doi.org/10.1016/j.msea.2018.12.106 

  13. Efremenko, V. G., Wu, K. M., Chabak, Y. G., Shimizu, K., Isayev, O. B., Kudin, V. V. (2018). Alternative Heat Treatments for Complex-Alloyed High-Cr Cast Iron Before Machining. Metallurgical and Materials Transactions A, 49 (8), 3430–3440. doi: https://doi.org/10.1007/s11661-018-4722-0 

  14. Efremenko, V., Shimizu, K., Pastukhova, T., Chabak, Y., Brykov, M., Kusumoto, K., Efremenko, A. (2018). Three-body abrasive wear behaviour of metastable spheroidal carbide cast irons with different chromium contents. International Journal of Materials Research, 109 (2), 147–156. doi: https://doi.org/10.3139/146.111583 

  15. Chabak, Y. G., Efremenko, V. G., Shimizu, K., Lekatou, A., Pastukhova, T. V., Azarkhov, A. Y., Zurnadzhy, V. I. (2018). Comparative Analysis of the Microstructural Features of 28 wt.% Cr Cast Iron Fabricated by Pulsed Plasma Deposition and Conventional Casting. Journal of Materials Engineering and Performance, 27 (2), 379–388. doi: https://doi.org/10.1007/s11665-017-3102-z 

  16. Efremenko, V. G., Chabak, Y. G., Shimizu, K., Lekatou, A. G., Zurnadzhy, V. I., Karantzalis, A. E. et. al. (2017). Structure refinement of high-Cr cast iron by plasma surface melting and post-heat treatment. Materials & Design, 126, 278–290. doi: https://doi.org/10.1016/j.matdes.2017.04.022