Substantiation of diagnostic parameters for determining the technical condition of transmission assemblies in trucks

Authors

DOI:

https://doi.org/10.15587/1729-4061.2018.125349

Keywords:

diagnostic parameter, reliability indicator, relative sensitivity, transportation vehicle, transmission assembly

Abstract

We have conducted a selection of diagnostic parameters to control technical condition of the gear box. Development of technical operation of transportation vehicles is aimed at examining and predicting a technical condition with the formation of a rational diagnostic base being a key direction.

Solving the tasks in a given scientific-technical field was based on the theory of relative sensitivity. This involved a theoretically substantiated relationship between diagnostic parameters and the indicators of reliability for the assemblies of transportation vehicles based on their parametric dependence that we proposed. The implementation of theoretical research was conducted by determining a technical condition based on the express diagnosis of transmission oil in the gear box of the family of trucks KamAZ. We have performed express control and examined the working transmission oil for the following parameters: alkaline number, the content of mechanical impurities, dielectric permittivity. The dependences of their change on the run of transportation vehicles were obtained, as well as the corresponding criteria of sensitivity over different intervals of the run. We selected diagnostic parameters and formed a rational base using the criterion of relative sensitivity, establishing the run and the required diagnostic parameters. Control over diagnostical parameters of the gear box should be executed for the following indicators: the content of mechanical impurities in transmission oil – within intervals of 0…12 and 48…60 thousand km of the run; the dielectric permittivity of oil should be controlled within 48…60 thousand km of the run; the alkaline number of transmission oil should be controlled within 12…24 and 48…60 thousand km of the run of the examined transportation vehicles. Based on the compiled rational diagnostic base, it is possible to run an analysis and predict technical condition of the gear box, as well as establish supporting operations in technical operation.

Author Biographies

Viktor Aulin, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropyvnytskyi, Ukraine, 25006

Doctor of Technical Sciences, Professor

Department of maintenance and repair of machines

Andriy Hrinkiv, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropyvnytskyi, Ukraine, 25006

Assistant

Department of maintenance and repair of machines

Aleksandr Dykha, Khmelnytskyi National University Instytutska str., 11, Khmelnytskyi, Ukraine, 29016

Doctor of Technical Sciences, Professor

Department of wear resistance and reliability of machines

Michailo Chernovol, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropyvnytskyi, Ukraine, 25006

Doctor of Technical Sciences, Professor

Department of maintenance and repair of machines

Oleg Lyashuk, Ternopil Ivan Puluj National Technical University Ruska str., 56, Ternopil, Ukraine, 46001

Doctor of Technical Sciences, Associate Professor

Department of Automobile

Sergey Lysenko, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropyvnytskyi, Ukraine, 25006

PhD, Associate Professor

Department of operation and repair of machines

References

  1. Shalkov, A., Mamaeva, M. (2017). Estimation of Energy Efficiency of Means of Transport According to the Results of Technical Diagnostics. E3S Web of Conferences, 21, 03013. doi: 10.1051/e3sconf/20172103013
  2. Ahmed, Q., Arasu, M., Zhang, J., Rizzoni, G. (2016). Sensors Installation Guide to Monitor Automatic Transmission Performance. IFAC-PapersOnLine, 49 (11), 736–741. doi: 10.1016/j.ifacol.2016.08.107
  3. Holmberg, K., Andersson, P., Nylund, N.-O., Mäkelä, K., Erdemir, A. (2014). Global energy consumption due to friction in trucks and buses. Tribology International, 78, 94–114. doi: 10.1016/j.triboint.2014.05.004
  4. Tan, C. K., Irving, P., Mba, D. (2007). A comparative experimental study on the diagnostic and prognostic capabilities of acoustics emission, vibration and spectrometric oil analysis for spur gears. Mechanical Systems and Signal Processing, 21 (1), 208–233. doi: 10.1016/j.ymssp.2005.09.015
  5. Jin, L., Qihua, M., Yiping, L. (2014). Analysis of the Automatic Transmission Fault Diagnosis Based on Bayesian Network Sensitivity. American Journal of Networks and Communications, 3 (2), 25–28. doi: 10.11648/j.ajnc.20140302.12
  6. Wei, S., Wang, D., Zhang, Z. (2011). Automotive automatic transmission based on the theory of fuzzy fault diagnosis system. Mechanical design and manufacturing, 1, 230–232.
  7. Kucherenko, S., Rodriguez-Fernandez, M., Pantelides, C., Shah, N. (2009). Monte Carlo evaluation of derivative-based global sensitivity measures. Reliability Engineering & System Safety, 94 (7), 1135–1148. doi: 10.1016/j.ress.2008.05.006
  8. Haghnegahdar, A., Razavi, S. (2017). Insights into sensitivity analysis of Earth and environmental systems models: On the impact of parameter perturbation scale. Environmental Modelling & Software, 95, 115–131. doi: 10.1016/j.envsoft.2017.03.031
  9. Kuz'menko, A. G. (2011). Razvitie metodov kontaktnoy tribomekhaniki. Problemi tribologii, 2, 117–135.
  10. Dykha, A., Aulin, V., Makovkin, O., Posonskiy, S. (2017). Determining the characteristics of viscous friction in the sliding supports using the method of pendulum. Eastern-European Journal of Enterprise Technologies, 3 (7 (87)), 4–10. doi: 10.15587/1729-4061.2017.99823
  11. Chernovol, M. I., Aulin, A. V., Hrynkiv, A. V. (2015). Uzghodzhennia zminy tekhnichnoho stanu z ratsionalnym vyborom obiektu diahnostuvannia. Visnyk Inzhenernoi akademiyi Ukrainy, 2, 182–189.
  12. Aulin, V. V., Hrynkiv, A. V. (2016). Vyznachennia naibilsh informatyvnishykh diahnostychnykh parametriv za chutlyvistiu funktsiyi stanu ahrehativ transportnykh zasobiv. Zb. tez dopovidei Х Vseukrainska naukovo-praktychna konferentsiya studentiv, aspirantiv ta molodykh naukovtsiv "Pidvyshchennia nadiynosti mashyn i obladnannia". Kirovohrad: KNTU, 53–55.

Downloads

Published

2018-03-06

How to Cite

Aulin, V., Hrinkiv, A., Dykha, A., Chernovol, M., Lyashuk, O., & Lysenko, S. (2018). Substantiation of diagnostic parameters for determining the technical condition of transmission assemblies in trucks. Eastern-European Journal of Enterprise Technologies, 2(1 (92), 4–13. https://doi.org/10.15587/1729-4061.2018.125349

Issue

Section

Engineering technological systems