Investigation of the electrochromic properties of Ni(OH)2 films on glass with ITO­Ni bilayer coating

Authors

  • Valerii Kotok Ukrainian State University of Chemical Technology Gagarina ave., 8, Dnipro, Ukraine, 49005 Federal State Educational Institution of Higher Education "Vyatka State University" Moskovskaya str., 36, Kirov, Russian Federation, 610000, Ukraine https://orcid.org/0000-0001-8879-7189
  • Vadym Kovalenko Ukrainian State University of Chemical Technology Gagarina ave., 8, Dnipro, Ukraine, 49005 Federal State Educational Institution of Higher Education "Vyatka State University" Moskovskaya str., 36, Kirov, Russian Federation, 610000, Ukraine https://orcid.org/0000-0002-8012-6732

DOI:

https://doi.org/10.15587/1729-4061.2018.133387

Keywords:

electrochromism, electrodeposition, thin films, Ni(OH)2, nickel, indium-tin oxide, nickel hydroxide

Abstract

Electrochromic films have been deposited onto glass coated with indium-tin oxide (ITO) and glass with ITO and a thin layer of metallic nickel deposited onto it. Nickel was deposited onto the surface of the ITO coating from nickel electroplating solution. The metallic nickel was deposited onto the surface of ITO at the following parameters – cathodic current density 0.5 A/dn2, deposition time 3 s. Such deposition parameters were chosen, because at longer deposition time and (or) higher current density, the deposited layer of metallic nickel became opaque. The two substrates were then used in the deposition of Ni(OH)2 electrochromic films using the cathodic template synthesis method. As a result, it was revealed that the electrochromic film deposited onto glass with ITO-Ni coating possesses higher specific characteristics than that deposited on bare ITO-coated glass: higher coloration degree and higher oxidation-reduction currents on the cyclic voltamperogram. However, it was also revealed that the film possessing better characteristics, on the contrary, has lower reversibility of the coloration-bleaching process. Based on the obtained data, the mechanism that explains the role of the intermediate metal layer was proposed. The mechanism is that the deposited layer of metallic nickel forms additional contacts between the substrate surface and the electrochromic film. The nickel layer can also assist in securing the electrochromic film, and during film deposition has a positive effect on current distribution. On the other hand, the lower reversibility of the coloration-bleaching process of the film on ITO-Ni coating can be explained by gradual oxidation of metallic nickel in the basic medium. At the same time, it was revealed that deposition of metallic nickel leads to some decrease of the substrate transparency.

Author Biographies

Valerii Kotok, Ukrainian State University of Chemical Technology Gagarina ave., 8, Dnipro, Ukraine, 49005 Federal State Educational Institution of Higher Education "Vyatka State University" Moskovskaya str., 36, Kirov, Russian Federation, 610000

PhD, Associate Professor

Department of Processes, Apparatus and General Chemical Technology

Department of Technologies of Inorganic Substances and Electrochemical Manufacturing

Vadym Kovalenko, Ukrainian State University of Chemical Technology Gagarina ave., 8, Dnipro, Ukraine, 49005 Federal State Educational Institution of Higher Education "Vyatka State University" Moskovskaya str., 36, Kirov, Russian Federation, 610000

PhD, Associate Professor

Department of Analytical Chemistry and Food Additives and Cosmetics

Department of Technologies of Inorganic Substances and Electrochemical Manufacturing

References

  1. Rathore, M. M., Ahmad, A., Paul, A., Rho, S. (2016). Urban planning and building smart cities based on the Internet of Things using Big Data analytics. Computer Networks, 101, 63–80. doi: 10.1016/j.comnet.2015.12.023
  2. Khajenasiri, I., Estebsari, A., Verhelst, M., Gielen, G. (2017). A Review on Internet of Things Solutions for Intelligent Energy Control in Buildings for Smart City Applications. Energy Procedia, 111, 770–779. doi: 10.1016/j.egypro.2017.03.239
  3. Smart Windows: Energy Efficiency with a View. NREL. Available at: https://www.nrel.gov/news/features/2010/1555.html
  4. Kotok, V. A., Kovalenko, V. L., Kovalenko, P. V., Solovov, V. A., Deabate, S., Mehdi, A. et. al. (2017). Advanced electrochromic Ni(OH)2/PVA films formed by electrochemical template synthesis. ARPN Journal of Engineering and Applied Sciences, 12 (13), 3962–3977.
  5. Kotok, V., Kovalenko, V. (2017). The electrochemical cathodic template synthesis of nickel hydroxide thin films for electrochromic devices: role of temperature. Eastern-European Journal of Enterprise Technologies, 2 (11 (86)), 28–34. doi: 10.15587/1729-4061.2017.97371
  6. Kotok, V. A., Malyshev, V. V., Solovov, V. A., Kovalenko, V. L. (2017). Soft Electrochemical Etching of FTO-Coated Glass for Use in Ni(OH) 2 -Based Electrochromic Devices. ECS Journal of Solid State Science and Technology, 6 (12), P772–P777. doi: 10.1149/2.0071712jss
  7. Dixit, M. (1999). Zinc-Substituted α-Nickel Hydroxide as an Electrode Material for Alkaline Secondary Cells. Journal of The Electrochemical Society, 146 (1), 79. doi: 10.1149/1.1391567
  8. Kotok, V., Kovalenko, V., Malyshev, V. (2017). Comparison of oxygen evolution parameters on different types of nickel hydroxide. Eastern-European Journal of Enterprise Technologies, 5 (12 (89)), 12–19. doi: 10.15587/1729-4061.2017.109770
  9. Kovalenko, V. L., Kotok, V. A., Sykchin, A. A., Mudryi, I. A., Ananchenko, B. A., Burkov, A. A. et. al. (2016). Nickel hydroxide obtained by high-temperature two-step synthesis as an effective material for supercapacitor applications. Journal of Solid State Electrochemistry, 21 (3), 683–691. doi: 10.1007/s10008-016-3405-2
  10. Kovalenko, V., Kotok, V., Bolotin, O. (2016). Definition of factors influencing on Ni(OH)2 electrochemical characteristics for supercapacitors. Eastern-European Journal of Enterprise Technologies, 5 (6 (83)), 17–22. doi: 10.15587/1729-4061.2016.79406
  11. Amjad, M. (1977). The Oxidation of Alcohols at a Nickel Anode in Alkaline t-Butanol/Water Mixtures. Journal of The Electrochemical Society, 124 (2), 203. doi: 10.1149/1.2133266
  12. Lyalin, B. V., Petrosyan, V. A. (2010). Oxidation of organic compounds on NiOOH electrode. Russian Journal of Electrochemistry, 46 (11), 1199–1214. doi: 10.1134/s1023193510110017
  13. Rao, Y., Wang, Y., Ning, H., Li, P., Wu, M. (2016). Hydrotalcite-like Ni(OH)2 Nanosheets in Situ Grown on Nickel Foam for Overall Water Splitting. ACS Applied Materials & Interfaces, 8 (49), 33601–33607. doi: 10.1021/acsami.6b11023
  14. Yan, J., Wu, H., Chen, H., Pang, L., Zhang, Y., Jiang, R. et. al. (2016). One-pot hydrothermal fabrication of layered β-Ni(OH) 2 /g-C 3 N 4 nanohybrids for enhanced photocatalytic water splitting. Applied Catalysis B: Environmental, 194, 74–83. doi: 10.1016/j.apcatb.2016.04.048
  15. Kotok, V., Kovalenko, V. (2017). Electrochromism of Ni(OH)2 films obtained by cathode template method with addition of Al, Zn, Co ions. Eastern-European Journal of Enterprise Technologies, 3 (12 (87)), 38–43. doi: 10.15587/1729-4061.2017.103010
  16. Vidotti, M., van Greco, C., Ponzio, E. A., Córdoba de Torresi, S. I. (2006). Sonochemically synthesized Ni(OH)2 and Co(OH)2 nanoparticles and their application in electrochromic electrodes. Electrochemistry Communications, 8 (4), 554–560. doi: 10.1016/j.elecom.2006.01.024
  17. Jiang, S., Yuan, G., Hua, C., Khan, S., Wu, Z., Liu, Y. et. al. (2017). Electrochromic Properties of Ni/NiO/rGO Nanocomposite Films Prepared by a Facile Sol-Gel Technique. Journal of The Electrochemical Society, 164 (13), H896–H902. doi: 10.1149/2.1231713jes
  18. Zhu, L., Nuo Peh, C. K., Zhu, T., Lim, Y.-F., Ho, G. W. (2017). Bifunctional 2D-on-2D MoO3 nanobelt/Ni(OH)2 nanosheets for supercapacitor-driven electrochromic energy storage. Journal of Materials Chemistry A, 5 (18), 8343–8351. doi: 10.1039/c7ta01858d
  19. Dong, W., Lv, Y., Zhang, N., Xiao, L., Fan, Y., Liu, X. (2017). Trifunctional NiO–Ag–NiO electrodes for ITO-free electrochromic supercapacitors. Journal of Materials Chemistry C, 5 (33), 8408–8414. doi: 10.1039/c7tc03120c
  20. Lin, S.-H., Chen, F.-R., Kai, J.-J. (2008). Electrochromic properties of nano-composite nickel oxide film. Applied Surface Science, 254 (11), 3357–3363. doi: 10.1016/j.apsusc.2007.11.022
  21. Fortunato, E., Ginley, D., Hosono, H., Paine, D. C. (2007). Transparent Conducting Oxides for Photovoltaics. MRS Bulletin, 32 (03), 242–247. doi: 10.1557/mrs2007.29
  22. Mirletz, H. M., Peterson, K. A., Martin, I. T., French, R. H. (2015). Degradation of transparent conductive oxides: Interfacial engineering and mechanistic insights. Solar Energy Materials and Solar Cells, 143, 529–538. doi: 10.1016/j.solmat.2015.07.030
  23. Kurdesau, F., Khripunov, G., da Cunha, A. F., Kaelin, M., Tiwari, A. N. (2006). Comparative study of ITO layers deposited by DC and RF magnetron sputtering at room temperature. Journal of Non-Crystalline Solids, 352 (9-20), 1466–1470. doi: 10.1016/j.jnoncrysol.2005.11.088
  24. Thirumoorthi, M., Thomas Joseph Prakash, J. (2016). Structure, optical and electrical properties of indium tin oxide ultra thin films prepared by jet nebulizer spray pyrolysis technique. Journal of Asian Ceramic Societies, 4 (1), 124–132. doi: 10.1016/j.jascer.2016.01.001
  25. Jeyadheepa, K., Karthick, P., Vijayanara, D., Suja, S., Sridharan, M. (2015). Opto-Electronic Properties of Fluorine Doped Tin Oxide Films Deposited by Nebulized Spray Pyrolysis Method. Asian Journal of Applied Sciences, 8 (4), 259–268. doi: 10.3923/ajaps.2015.259.268
  26. Du, J., Chen, X., Liu, C., Ni, J., Hou, G., Zhao, Y., Zhang, X. (2014). Highly transparent and conductive indium tin oxide thin films for solar cells grown by reactive thermal evaporation at low temperature. Applied Physics A, 117 (2), 815–822. doi: 10.1007/s00339-014-8436-x
  27. Bicelli, L. P., Bozzini, B., Mele, C., D'Urzo, L. (2008). A Review of Nanostructural Aspects of Metal Electrodeposition. Int. J. Electrochem. Sci., 3, 356–408.

Downloads

Published

2018-06-13

How to Cite

Kotok, V., & Kovalenko, V. (2018). Investigation of the electrochromic properties of Ni(OH)2 films on glass with ITO­Ni bilayer coating. Eastern-European Journal of Enterprise Technologies, 3(5 (93), 55–61. https://doi.org/10.15587/1729-4061.2018.133387

Issue

Section

Applied physics