Optimal performance of 16-bit acyclic adders of binary codes

Authors

DOI:

https://doi.org/10.15587/1729-4061.2019.168485

Keywords:

optimal performance of acyclic adders, Ling Adder, Kogge-Stone Adder, Knowles Adder

Abstract

The conducted studies established the prospect for enhancing the performance of computing components, specifically, combinational 16-bit adders, based on the use of the principles of computation of digital signals of an acyclic model.

The application of an acyclic model for the synthesis of 16-bit parallel adders is designed for:

– the process of sequential (for lower bits) and parallel (for all other bits) computation of the sum and carry signals. Thanks to this approach, it becomes possible to reduce eventually the complexity of the hardware part without increasing the circuit depth;

– fixation (planning) of the adder circuit depth before its synthesis. This makes it possible to use the logical structure of transitive carry, which ensures the optimal adder circuit depth and does not increase its complexity.

Utilizing an acyclic model for the construction of 16-bit parallel adders is more beneficial in comparison with the analogs by the following factors:

– the lower cost development, since an acyclic model determines a simpler

structure of a 16-bit adder;

– application of the latest developed logical structures of transitive carry,

which makes it possible to decrease the delay of sum and carry signals, area, power consumption and to increase overall efficiency of 16-bit adders of binary codes.

Due to this, the possibility of obtaining optimal values of structure complexity and the depth of the adder circuit is ensured. In comparison with the analogs, it provides an increase in quality of indicator of 16-bit acyclic adders, such as power consumption, chip area by 15–27 %, depending on the chosen structure, and performance by 10–60 %.

There are some grounds to argue about the possibility of enhancing the performance of computing components, specifically, 16-bit adders of binary codes by using the principles of computation of digital signals of an acyclic model.

Author Biographies

Mykhailo Solomko, National University of Water and Environmental Engineering Soborna str., 11, Rivne, Ukraine, 33028

PhD, Associate Professor

Department of Computer Engineering

Petro Tadeyev, National University of Water and Environmental Engineering Soborna str., 11, Rivne, Ukraine, 33028

PhD, Doctor of Pedagogical Sciences, Professor

Department of Higher Mathematics

Vitalii Nazaruk, National University of Water and Environmental Engineering Soborna str., 11, Rivne, Ukraine, 33028

PhD

Department of Computer Engineering

Nataliia Khariv, National University of Water and Environmental Engineering Soborna str., 11, Rivne, Ukraine, 33028

Senior Lecturer

Department of Applied Mathematics

References

  1. Solomko, M. (2018). Optimization of the acyclic adders of binary codes. Technology audit and production reserves, 3 (2 (41)), 55–65. doi: https://doi.org/10.15587/2312-8372.2018.133694
  2. Solomko, M., Tadeyev, P., Zubyk, Y., Hladka, O. (2019). Reduction and optimal performance of acyclic adders of binary codes. Eastern-European Journal of Enterprise Technologies, 1 (4 (97)), 40–53. doi: https://doi.org/10.15587/1729-4061.2019.157150
  3. Baba Fariddin, S., Vargil Vijay, E. (2013). Design of Efficient 16-Bit Parallel Prefix Ladner-Fischer Adder. International Journal of Computer Applications, 79 (16), 11–14. doi: https://doi.org/10.5120/13943-1784
  4. Michael Preetam Raj, P., Sandeep, B., Sai Mallik Reddy, D., Ramanjaneyulu, P., Sai Pravallika, S. (2016). Design of Prefix Adder Amalgamation Reversible Logic Gates using 16 Bit Kogge Stone Adder. Indian Journal of Science and Technology, 9 (13). doi: https://doi.org/10.17485/ijst/2016/v9i13/87911
  5. Shanil Mohamed, N., Siby, T. Y. (2014). 16-bit velocious fault lenient parallel prefix adder. 2014 International Conference on Electronics, Communication and Computational Engineering (ICECCE). doi: https://doi.org/10.1109/icecce.2014.7086612
  6. Poornima, N., Bhaaskaran, V. S. K. (2015). Area Efficient Hybrid Parallel Prefix Adders. Procedia Materials Science, 10, 371–380. doi: https://doi.org/10.1016/j.mspro.2015.06.069
  7. Payal, R., Goel, M., Manglik, P. (2015). Design and Implementation of Parallel Prefix Adder for Improving the Performance of Carry Lookahead Adder. International Journal of Engineering Research & Technology, 4 (12), 566–571. doi: https://doi.org/10.17577/ijertv4is120608
  8. Vamshi Krishna, T., Niveditha, S., Mamatha, G. N., Sunil, M. P. (2018). Simulation study of brent kung adder using cadence tool. International Journal of Advance Research, Ideas and Innovations in Technology, 4 (3), 564–573. Available at: https://www.ijariit.com/manuscripts/v4i3/V4I3-1383.pdf
  9. Padma Balaji, R. D., Tarun, P., Yeswanth Kumar, E., Anita Angeline, A. (2018). Design of 16-Bit Adder Structures-Performance Comparison. International Journal of Pure and Applied Mathematics, 118 (24). Available at: https://acadpubl.eu/hub/2018-118-24/3/492.pdf
  10. Kaneko, M. (2019). A Novel Framework for Procedural Construction of Parallel Prefix Adders. 2019 IEEE International Symposium on Circuits and Systems (ISCAS). doi: https://doi.org/10.1109/iscas.2019.8702117
  11. Krulikovskyi, B. B., Vozna, N. Ya., Hryha, V. M., Nykolaichuk, Ya. M., Davletova, A. Ya. (2017). Pat. No. 117572U UA. Sumator z pryskorenym perenosom. MPK G 06 F 7/38 (2006.01). No. u201701336; declareted: 13.02.2017; published: 26.06.2017, Bul. No. 12.
  12. Gedam, S. K., Zode, P. P. (2014). Parallel prefix Han-Carlson adder. International Journal of Research in Engineering and Applied Sciences, 02 (02), 81–84. Available at: http://www.mgijournal.com/pdf_new/Electronics/Swapna%20Gedam-1.pdf
  13. Zeydel, B. R., Baran, D., Oklobdzija, V. G. (2010). Energy-Efficient Design Methodologies: High-Performance VLSI Adders. IEEE Journal of Solid-State Circuits, 45 (6), 1220–1233. doi: https://doi.org/10.1109/jssc.2010.2048730
  14. Govindarajulu, S., Vijaya Durga Royal, T. (2014). Design of Energy-Efficient and High-Performance VLSI Adders. International Journal of Engineering Research, 3, 55–59. Available at: https://pdfs.semanticscholar.org/a54c/5727cdc2be7830ea734f15eb1ba9ecfc2110.pdf
  15. Pinto, R., Shama, K. (2016). Efficient shift-add multiplier design using parallel prefix adder. International Journal of Control Theory and Applications, 9 (39), 45–53.
  16. Kogge, P. M., Stone, H. S. (1973). A Parallel Algorithm for the Efficient Solution of a General Class of Recurrence Equations. IEEE Transactions on Computers, C-22 (8), 786–793. doi: https://doi.org/10.1109/tc.1973.5009159
  17. Class ECE6332 Fall 12 Group-Fault-Tolerant Reconfigurable PPA. Available at: http://venividiwiki.ee.virginia.edu/mediawiki/index.php/ClassECE6332Fall12Group-Fault-Tolerant_Reconfigurable_PPA
  18. Two-Operand Addition. Available at: https://pubweb.eng.utah.edu/~cs5830/Slides/addersx6.pdf
  19. Knowles, S. (1999). A family of adders. Proceedings 14th IEEE Symposium on Computer Arithmetic (Cat. No.99CB36336). doi: https://doi.org/10.1109/arith.1999.762825
  20. Sklansky, J. (1960). Conditional-Sum Addition Logic. IEEE Transactions on Electronic Computers, EC-9 (2), 226–231. doi: https://doi.org/10.1109/tec.1960.5219822
  21. Han, T., Carlson, D. A. (1987). Fast area-efficient VLSI adders. 1987 IEEE 8th Symposium on Computer Arithmetic (ARITH). doi: https://doi.org/10.1109/arith.1987.6158699
  22. Ladner, R. E., Fischer, M. J. (1980). Parallel Prefix Computation. Journal of the ACM, 27 (4), 831–838. doi: https://doi.org/10.1145/322217.322232
  23. Brent, R., Kung, H. T. (1982). A Regular Layout for Parallel Adders. IEEE Transactions on Computers, C-31 (3), 260–264. doi: https://doi.org/10.1109/tc.1982.1675982

Downloads

Published

2019-05-27

How to Cite

Solomko, M., Tadeyev, P., Nazaruk, V., & Khariv, N. (2019). Optimal performance of 16-bit acyclic adders of binary codes. Eastern-European Journal of Enterprise Technologies, 3(4 (99), 21–36. https://doi.org/10.15587/1729-4061.2019.168485

Issue

Section

Mathematics and Cybernetics - applied aspects