Thermal state of steel structures with a combined fire protection system under conditions of fire exposure

Authors

DOI:

https://doi.org/10.15587/1729-4061.2020.206373

Keywords:

fire protection material, critical temperature of steel, steel structure, fire protection system, fire exposure

Abstract

Given the need to minimize the weight-dimensional indicators of steel structures, the issue of the effective use of a combined fire protection system is relevant. The article deals with the thermal state of steel structures with such a system of fire protection under conditions of fire exposure in the standard temperature mode according to DSTU B V. 1.1-4-98*. The experimental samples used square steel plates with a side of 500 mm and a thickness of 5 mm and 10 mm. The conducted research revealed the peculiarities of dependences of the temperatures of steel structures with passive and reactive fire-retardant materials of two brands on the duration of fire exposure.

It was established that these dependences for steel structures with combined, passive, and reactive fire protection systems have a monotonously growing character. The maximum values of the duration of fire exposure are typical of the experimental samples that have the steel plate of the thickness of 10 mm, for a critical temperature of steel of 600 °C. They are 111 min, 101 min, 55 minutes, respectively, for the combined, passive, and reactive fire protection systems.

It was established that a combined fire protection system is characterized by an increase in the duration of reaching the critical temperature of steel in comparison with passive and reactive fire protection systems. This is due to the effective combination of physical and chemical properties of passive and reactive fire-retardant materials.

For the duration of fire exposure up to 79 min, the value of the duration of reaching the critical temperature of steel for a combined fire protection system exceeds the sum of durations of its achievement, which are typical for passive and reactive fire protection systems. This indicates the effectiveness of a combined system in this range of fire exposure duration.

At an increase in the duration of fire exposure, the effectiveness of a combined fire protection system decreases.

Author Biographies

Serhii Novak, Institute of Public Administration and Research in Civil Protection Rybalskа str., 18, Kyiv, Ukraine, 01011

PhD, Senior Researcher

Scientific Testing Center

Varvara Drizhd, Scientific and Manufacturing Enterprise “Spetsmaterialy” Telmana str., 12, Boryspil, Ukraine, 08304

PhD

Oleksandr Dobrostan, Institute of Public Administration and Research in Civil Protection Rybalskа str., 18, Kyiv, Ukraine, 01011

PhD

Scientific Testing Center

References

  1. Regulation (EU) No. 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Available at: https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=celex%3A32011R0305
  2. Tekhnichnyi rehlament budivelnykh vyrobiv, budivel i sporud (2006). Ofitsiynyi visnyk Ukrainy, No. 51, st. 3415.
  3. DBN V.1.2-7-2008. Systema zabezpechennia nadiynosti ta bezpeky budivelnykh obiektiv. Osnovni vymohy do budivel i sporud. Pozhezhna bezpeka. Kyiv: Minrehionbud Ukrainy, 31.
  4. ETAG No. 018-1:2004. Guideline for european technical approval of fire protective products. Part 1: General. Available at: https://itec.es/certificacion/files/etag-018-part-1-april-2013.pdf
  5. ETAG No. 018-2:2013. Guide for the European technical approval of fire protective products. Part 2: Reactive coatings for fire protection of steel elements.
  6. ETAG No. 018-3:2013. Guide for the European technical approval of fire protective products – Part 3: Renderings and rendering kits intended for fire resisting applications. Available at: http://www.itb.pl/g/f/NDY1
  7. ETAG No. 018-4:2011. Guideline for european technical approval of fire protective products. Part 4: Fire protective board, slab and mat products and kits. Available at: https://www.itb.pl/g/f/NDY2
  8. DSTU EN 13501-2:2016. Fire classification of construction products and building elements. Part 2: Classification using data from fire resistance tests, excluding ventilation services (EN 13501-2:2007+A1:2009, IDT) (2016). Kyiv: DP «UkrNDNTs», 80.
  9. EAD 350454-00-1104. Fire stopping and fire sealing products. Penetration seals. Available at: https://www.eota.eu/handlers/download.ashx?filename=ead-in-ojeu%2Fead-350454-00-1104-ojeu2017.pdf
  10. EN 1365-3:1999. Fire resistance tests for loadbearing elements – Part 3: Beams (1999). European committee for standardization.
  11. EN 1365-4:1999. Fire resistance tests for loadbearing elements – Part 4: Columns (1999). European committee for standardization.
  12. EN 1993-1-2:2005 Eurocode 3: Design of steel structures – Part 1-2: General rules – Structural fire design (2005). European committee for standardization.
  13. EN 13381-4:2013. Test methods for determining the contribution to the fire resistance of structural members – Part 4: Applied passive protection to steel members (2013). European committee for standardization.
  14. EN 13381-8:2013. Test methods for determining the contribution to the fire resistance of structural members – Part 8: Applied reactive protection to steel members (2013). European committee for standardization.
  15. Kalafat, K., Vahitova, L. (2017). Katalog sredstv ognezashchity stal'nyh konstruktsiy 2017. Kyiv: UTSSS, NPP Interservis, 94.
  16. Pronin, D. G. (2015). Ognestoykost' stal'nyh nesushchih konstruktsiy. Moscow, 52.
  17. Vahitova, L. N., Kalafat, K. V. (2015). Osnovy ognezashchity stal'nyh konstruktsiy. Promyslove budivnytstvo ta inzhenerni sporudy, 2, 23–27.
  18. Vandersall, H. L. (1971). Intumescent Coating Systems, Their Development and Chemistry. Journal of Fire and Flammability, 2, 97–140.
  19. Horaceck, H., Pieh, S. (2000). The importance of intumescent systems for fire protection of plastic materials. Polymer International, 49, 1106–1114. doi: https://doi.org/10.1002/1097-0126(200010)49:10<1106::aid-pi539>3.0.co;2-i
  20. Gillet, M., Autrique, L., Perez, L. (2007). Mathematical model for intumescent coatings growth: application to fire retardant systems evaluation. Journal of Physics D: Applied Physics, 40 (3), 883–899. doi: https://doi.org/10.1088/0022-3727/40/3/030
  21. De Silva, D., Bilotta, A., Nigro, E. (2019). Experimental investigation on steel elements protected with intumescent coating. Construction and Building Materials, 205, 232–244. doi: https://doi.org/10.1016/j.conbuildmat.2019.01.223
  22. Andersen, J. (2015). Experimental study of the thermal resistance of intumescent coatings exposed to different heating rates. Copenhagen.
  23. Li, G.-Q., Zhang, C., Lou, G.-B., Wang, Y.-C., Wang, L.-L. (2011). Assess the Fire Resistance of Intumescent Coatings by Equivalent Constant Thermal Resistance. Fire Technology, 48 (2), 529–546. doi: https://doi.org/10.1007/s10694-011-0243-8
  24. Wang, L., Dong, Y., Zhang, C., Zhang, D. (2015). Experimental Study of Heat Transfer in Intumescent Coatings Exposed to Non-Standard Furnace Curves. Fire Technology, 51 (3), 627–643. doi: https://doi.org/10.1007/s10694-015-0460-7
  25. Zhang, Y., Wang, Y. C., Bailey, C. G., Taylor, A. P. (2012). Global modelling of fire protection performance of an intumescent coating under different furnace fire conditions. Journal of Fire Sciences, 31 (1), 51–72. doi: https://doi.org/10.1177/0734904112453566
  26. Song, Q.-Y., Han, L.-H., Zhou, K., Feng, Y. (2018). Temperature distribution of CFST columns protected by intumescent fire coating. Ninth International Conference on Advances in Steel Structures (ICASS’2018). doi: https://doi.org/10.18057/icass2018.p.164
  27. DSTU B V.1.1-4-98* Zakhyst vid pozhezhi. Budivelni konstruktsiyi. Metody vyprobuvan na vohnestiikist. Zahalni vymohy (2005). Kyiv: Derzhbud Ukrainy, 19.
  28. Plita Thermatex Feinfresko (Faynfresko) AMF-Knauf. Available at: https://potolok777.ru/feinfresko-amf
  29. TU U 13481691.005-2001. Sumishi dlia vohnezakhysnykh pokryttiv «Endoterm 400201», «Endoterm 400202», «Endoterm 650202», «Endoterm 250103». Tekhnichni umovy (2001). Donetskyi tsentr standartyzatsiyi, metrolohiyi ta sertyfikatsiyi, 24.
  30. DSTU-N-P B V.1.1-29:2010. Fire protection. Fire retardant treatment of building constructions. General requirements and methods of controlling (2011). Kyiv: Minrehionbud Ukrainy, 9.
  31. Novak, S., Dobrostan, O., Dolishnii, Y., Ratushnyi, O. (2017). Evaluation of convergence the results of experimental determination of duration of fire influence to achieve the critical temperature of steel. Naukovyi visnyk: Tsyvilnyi zakhyst ta pozhezhna bezpeka, 2 (4), 67–72.

Downloads

Published

2020-06-30

How to Cite

Novak, S., Drizhd, V., & Dobrostan, O. (2020). Thermal state of steel structures with a combined fire protection system under conditions of fire exposure. Eastern-European Journal of Enterprise Technologies, 3(10 (105), 17–25. https://doi.org/10.15587/1729-4061.2020.206373