Применение методов стохастической оптимизации для решения задач системного совершенствования элементов газотурбинных двигателей

Authors

  • А. А. Трончук
  • М. Л. Угрюмов

DOI:

https://doi.org/10.15587/1729-4061.2009.22009

Keywords:

elements, gas turbine engine, method, stochastic optimization

Abstract

Problem solving-procedure is offered for system improving in elements of gas turbine engines (GTE) on the basis of probabilistic criteria. Search of rational solutions of multi-criterion problems of parameter optimization is realized on the basis of the offered method of stochastic optimization that allows finding solutions with prescribed accuracy and attracting less informational means than standard methods. Examples of realizing the proposed method by selection of parameters of (GTE) elements are considered

References

  1. Угрюмова Е.М. Совершенствование сложных технических систем методом обратных задач / Е.М. Угрюмова, С.Г. Волков, М.Л. Угрюмов // Авиационно-космическая техника и технология. – 2006. – № 1 (27). – С. 91 – 95.
  2. Е.М. Угрюмова, А.А. Трончук, М.Л. Угрюмов, А.В. Меняйлов, Г.С. Цыховский Методология совершенствование газотурбинных двигателей на основе решения взаимосвязанных оптимизационных и обратных задач // Вестник двигателестроения. – 2007. – № 3. – С. 156 – 162.
  3. Рутковская Д. Нейронные сети, генетические алгоритмы и нечеткие системы. / Д. Рутковская, М. Пилиньский, Л. Рутковский. – М.: Горячая линия – Телеком, 2004. – 452 с.

Downloads

Published

2009-08-20

How to Cite

Трончук, А. А., & Угрюмов, М. Л. (2009). Применение методов стохастической оптимизации для решения задач системного совершенствования элементов газотурбинных двигателей. Eastern-European Journal of Enterprise Technologies, 4(5(40), 46–50. https://doi.org/10.15587/1729-4061.2009.22009

Issue

Vol. 4 No. 5(40) (2009): Modern technologies in the gas-turbine. Part II

Section

Modern technologies in the gas-turbine

License

Copyright (c) 2014 А. А. Трончук, М. Л. Угрюмов

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.