A device for calibrating and metrological verification of digital seismic recorders

Authors

  • S. V. Shcherbina S.I. Subbotin Institute of Geophysics of the National Academy of Sciences of Ukraine, Ukraine

DOI:

https://doi.org/10.24028/gzh.0203-3100.v36i2.2014.116132

Keywords:

seismometers, calibration, seismometry, metrology, measurement of real-time systems

Abstract

Periodic temporary change properties seismometrological own equipment or foreign develop-ment requires periodic their engineering studies and measurement control. In the period of the USSM is made on test seismometer calibration devices located in Russia. Now the number of seis-mic sensors of various industries in the country is increasing. Briefly describes the instrumentation developed for vibration testing of different seismometer output and results of its use for testing methods of metrological control procedures

References

Verbickij S. T., 2006. Hardware-software system DAS-04 for monitoring hazardous geodynamic and natural phenomena: Proceeding of the Ukrainian Sci. Conf. «Monitoring of hazardous geological processes and ecological condition of the environment», Kiev, September 21—24, 2006. Kiev: «Kiev University», 159—161 (in Ukrainian).

Verbickij S. T., Verbickij Ju. T., Prokopishin V. I., Igna- tishin V. V., 2013. Carpathian Seismological Network of Ukraine. http://seism.lviv.ua/map.

Sherbina S. V., 2011. Digital seismic recorders and their calibration. Geofizicheskij zhurnal 33(2), 136—160 (in Russian).

Sherbina S. V., Feshhenko A. I., Pankov F. N, Leso- voj Ju. V., Kendzera A. V., 2013. Device for

calibration of seismometers. Ukraine. Pat. 77339 (in Russian).

ADLink Technology Inc. PCI-9111 Multi-Functions Data Acquisition Card. User’s Guide. Manual Rev 2.11: January 25. 1999.

Barabanov M., Yodaiken V., 1996. Real-time linux. Linux Journal, March.

Bormann P., 2009. New Manual of Seismological Observatory Practice (NMSOP). Potsdam: Deutsches GeoForschungsZentrum GFZ, Р. 1—18.

Güralp Systems Introduction, 2012. http://www.guralp.com/documents/html/MAN-SWA-0003. Introduction to Linux for Real-Time Control. Introductory Guidelines and Reference for Control Engineers and Managers. Aeolean Inc., 54 Sarah Bishop Road Ridgefield. CT 06877-1215. Version 2.0.0, 2002-12-11, T1531.

Mitronovas W., Wielandt E., 1975. High-precision phase calibration of long-period electromagnetic seismographs. Bull. Seismol. Soc. Am., 65(2), 441—424.

Streckeisen STS-2. Appendix B. Summary Sheet for PASSCAL Sensor, 1997. www.iris.edu/hq/files/programs/passcal/docs/sensor_specs/sts2.pdf

UsherM. J., Guralp C. M., Burch R. F., 1978. The Design of Miniature Wideband Seismometers. Geophys. J. Roy. Аstr. Soc. 55(is. 3), 605—613.

Uyeda S., Nagao T., Hattori K., Hayakawa M., Miya ki K., Molchanov O., Gladyshev V., Baransky L., Schekotov A., Fedorov E., Pokhotelov O., Andreevsky S., Rozhnoi A., Khabazin V., Gorbatikov A., Gordeev E., Chebrov V., Sinitsyn V., Lutikov A., Yunga S., Kosarev G., Surkov V., Belyaev G., 2001. Geophysical Observatory in Kamchatka region for monitoring of phenomena connected with seismic activity. Nat. Hazards Earth System Sci., 1(1/2), 3—7.

Downloads

Published

2014-04-01

How to Cite

Shcherbina, S. V. (2014). A device for calibrating and metrological verification of digital seismic recorders. Geofizicheskiy Zhurnal, 36(2), 161–171. https://doi.org/10.24028/gzh.0203-3100.v36i2.2014.116132

Issue

Vol. 36 No. 2 (2014)

Section

Scientific Reports

License

Copyright (c) 2020 Geofizicheskiy Zhurnal

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).