Submissions

Articles in electronic format should be sent to the journal's e-mail: audiovisual-art@knukim.edu.ua

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • This submission has not previously been issued and not yet been sent for consideration to other journals (or the necessary explanation are given below in comments to the editor).
  • Submission file is a document in the format of Microsoft Word, OpenOffice, RTF or WordPerfect.
  • The Internet links in the text are accompanied by complete correct URL addresses.
  • Text is typed in 14 size font with one and a half line spacing; author’s emphasizes are in italics and are not underlined (everywhere except the URL addresses); all artwork, graphics, and tables are placed directly in the text, where they should be according to the content (but not at the end of the document).
  • The text meets the requirements to the style and bibliography, which are set in Author guidelines.
  • If the Material is submitted to the reviewed section of the journal, the instructions regarding to Blind Peer Review have been executed.

Author Guidelines

Requirements for the content and design of articles

Procedure for accepting articles

Original problem articles that have never been published before (Ukrainian, and English) are accepted for publication in scientific journal.

The procedure of scientific examination are all research articles received by the editorial Board. The review process is carried out by members of the editorial Board and independent experts in the relevant fields and takes place within 14 days. For all articles submitted for review, the level of uniqueness of the author's text is determined using the appropriate software ("UNICHECK"), which shows the level of uniqueness of the article. Uniqueness must be at least 85%.

The editorial Board passes the article to the reviewers by the so-called "blind" method of reviewing.

According to the results of the review, the editorial Board decides on:

  • acceptance of the article;
  • return of the article to the author for revision, taking into account the comments of reviewers;
  • refusal to accept the article for publication.

The process of reviewing and editing articles is maximally automated. The database of the system stores information about the authors of scientific articles, reviewers, editors and contact information.

Reviewers receive an article without the name of the author (s) of the article, and the author (s) is not informed of the names of the reviewers.

Review form (Appendix 1)

 

The editorial Board reserves the right to reject an article at the stage of preliminary consideration, if its content does not correspond to the subject and scientific direction of the journal, as well as the requirements for the structure and technical design of the article are not met.

The editorial Board of the scientific journal evaluates manuscripts on their intellectual content regardless of race, sex, sexual orientation, religious beliefs, ethnic origin, citizenship or political views of the author of a written scientific work (article).

The scientific article, which received positive reviews, is transferred to the literary and technical editing. Edited and prepared for publication materials before publication are finally agreed with the author.

Requirements for submission and execution of articles

Authors should send their articles in the original language to the journal's e-mail address audiovisual-art@knukim.edu.ua, indicating to which edition the article is submitted.

According to the instructions for authors, articles should be submitted in Microsoft Office Word format (doc or docx). The author is also required to fill in the Author's Statement, indicating in the subject line which edition the article is submitted to.

The name of the file should contain the author's name and its name in Latin letters.

For example: Doslidzhennyatvorchosti I. Franka Ivanov.doc, docx. If the authors are several-the names of the first two authors, Doslidzhennyatvorchosti I. Franka Ivanov Petrov.doc, docx.

The file with the author's help is similar to the file name of the article with the addition of the Dovidka mark at the end of the file name.

For example: Doslidzennyatvorchosti I.Franka Ivanov Dovidka.doc (doc/х).

Example of registration of the author's certificate - Appendix 3.

 

The presentation of the article should be clear, informative, meet the requirements of the Department of Personnel Attestation and contain the following elements:

  • formulation of the problem in General and its connection with important scientific and practical tasks;
  • analysis of the latest research and publications, which started to solve this problem and on which the author relies, the allocation of previously unsolved parts of the overall problem;
  • formulation of the article's objectives (Purpose and objectives. DO not write in General terms, and clearly describe what methods and how used for this study; that is, to reveal the mechanism of the study - how it was obtained). Volume - about 3000 characters.
  • presentation of the main research material with full justification of the scientific results;
  • conclusions of the study and prospects for further research in this direction. The approximate volume of the manuscript: scientific articles up to 40 thousand.

Structural elements of the article should be highlighted in bold, namely:

Introduction-in General and its connection with important scientific and practical tasks;

Analysis of the latest research and publications, which started to solve this problem, which refers to the author,

Allocation of previously unsolved parts of the General problem to which the article is devoted;

Formulation of article goals (problem statement);

Exposition of the main material of the study with full justification of the scientific results obtained;

Conclusions from this study and prospects for further development in this direction.

Requirements for CV (abstract annotation)

Resumes submitted in Ukrainian and English (Abstract) languages.

Volume of abstract:

at least 2000 characters, including articles and spaces.

Summary in English should be written in correct English, taking into account the peculiarities of spelling and grammar (British). It is unacceptable to submit a resume, translated only by using computer translators.

Resume structure.

The summary should clearly indicate:

  • purpose of the study(main objective(s) of the study)
  • methods (methodology) - not General phrases, and clearly indicate how certain methods were applied; that is, to reveal the mechanism of the study - how its results were obtained (how the study was done);
  • main results and conclusions of the study

(results / findings and conclusions),which should be understood by their importance (significance) for science, society, education, etc. (received a new and valuable factual material; identify new relationships and patterns; confirmed or disproved certain hypotheses etc.).

All the mentioned components of the resume should be clearly identified. To do this, we recommend to use the words in the summary: main objective(s) of the study, methodology, results, findings, conclusions, significance.

If necessary, at the beginning of the summary to specify in one sentence the relevance of the study, if it is not obvious from the title, purpose or conclusions of the study.

Keywords

After the summary, you need to specify at least 3 and no more than 10 keywords, separated by a comma.

When choosing keywords, please note that they will help to find your publication in electronic catalogs and scientometric databases, and increase the index of its citation.

We recommend you to analyze what keywords are usually used in publications on the topic of your research: for example, ScienceDirect publishing Elsevier (Scopus):http://www.sciencedirect.com/science/search.

 

Structure of the main text of the article

  • index UDC (Universal Decimal Classification) (left edge of the article)
  • surname, name and patronymic, academic degree, academic title, position, work place of the author / authors ((on the right edge of the article));
  • ORCID-identifier of the author (ORCID ID) (see: https://orcid.org) - on the right edge of the article;
  • the title of the article (in the middle, in capital letters, highlight bold);
  • Abstract Word "Abstract" is not indicated before the text of the abstract;
  • keywords: not less than 3 and not more than 10;
  • text of article;
  • list of sources used

 

Requirements for technical design

The title of the article should be typed in capital letters, without hyphenation, in the center. Texting using the Caps Lock option is not allowed.

Distinguish between characters (-diff) and (- dash), ('- apostrophe), («» - paws for Cyrillic text, and"" - English)

1. Page format - A4

2. Font - Times New Roman

3. Font size - 14

4. Interval - 1.5

5. Paragraph indentation - 1.25 mm

6. Alignment - in width

7. All banks - 20 mm

8. Volume - 12-14(with applications, tables, illustrations, list of sources used).

Information for feedback (phone, e-mail).

 

Requirements for the main text of the article:

The design of references in the text must comply with the recommendations on the design of Harvard Referencing Style.

Information and documentation. Bibliographic reference. General terms and rules of preparation.

- Quotes are submitted in the language of the article. Archival and manuscript sources are quoted and published in the original language. The content of quotations and links to relevant pages should clearly correspond to the original sources.

- The names of any periodicals submitted in the text in the original language.

- Charts, graphs, formula charts and tables are numbered.

- Tables are formed in the table editor (menu item "table".

- The table format is book only.

- If the article contains diagrams, they should be grouped (View – Toolbar –Drawing - Object Selection.Holding the "Select Object"button, select the objects you want to group in the "Drawing toolbar", click the "Actions" button, select "Group"). All figures, tables and diagrams should be numbered and have references to the text of the article (Fig. 1). Placement of the figure (scheme, table) in the text should be as close as possible to the place in the text where there is a reference to this figure (scheme, table). All figures (charts, tables) needs to be signed and have the title. In case of drawing (diagrams, tables) it is necessary to specify their source.

Automatic page numbering is not set.

Illustrations. The number of illustrations should not exceed five. Illustration file format: jpg. The resolution of illustrations is 300 dpi.

Each illustration should be sent as a separate file. The name of the illustration file should be the name of the author of the article in Latin.

If there are several illustrations, it is necessary to add the serial number of the illustration in the file name of the author's name. For example, Ivanov 1.jpg; Ivanov 2.jpg; Ivanov 3.jpg.

Copyright Notice

The authors retain copyrights to the work and at the same time grant the journal the right to first publish it under the terms of the Creative Commons Attribution License, which allows other persons to freely distribute the published work with a mandatory reference to its authors and its first publication..

The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.

The author of the published article has the right to distribute information about it and to post references to work in the electronic repository of the institution.

Privacy Statement

Names and emails specified by users of this magazine site will only be used to perform the internal technical tasks of this journal; they will not be distributed and transferred to third parties.