DEVELOPING THE INFORMATION SEARCH SYSTEM FOR SELECTING THE MOULDS FORMING ELEMENTS

Authors

DOI:

https://doi.org/10.30837/2522-9818.2017.2.086

Keywords:

selection, interface, information, search, system

Abstract

Today the information environment is highly developed, it enables collecting, processing, storing, distributing, searching and transferring of information. The need for automation of information activities and information resources management at all levels stipulates the demand for the development of information search systems. The subject matter of this research is the information search system for selecting the moulds forming elements. The aim of this work is to reduce the time for searching and determining the main parameters of the matrices, punches and characters by means of creating the information search system for selecting the moulds forming elements. To achieve this goal the following tasks should be solved: to review the main moulds forming elements and their technical parameters; to develop a search algorithm; to develop the database structure for selecting the moulds forming elements; to design the interface of the information search system. While solving the set tasks, the methodology of the systems analysis and modelling was used. The review the main objectives and characteristics of information search systems resulted in the development of the database logical structure which consists of 6 tables. The interface of the information search system was developed. It provides the “easy” and self-explanatory selection of moulds forming elements. Thus, the developed system includes information about the unique number of the forming elements; their type, name and properties; material and features of the quality of a workpiece surface; a workpiece kind and form to determine the nominal dimensions of forming elements. The use of the system enables reducing the time of searching and identifying forming the key technical parameters of forming elements as well as storing and manipulating the data about these elements.

Author Biographies

Svetlana Sotnik, Kharkiv National University of Radioelectronics

PhD (Engineering Sciences), Kharkiv National University of Radioelectronics, Associate Professor of Department of Computer-Integrated Technologies, Automation and Mechatronics

Viktoriia Nevliudova, Kharkiv National University of Radioelectronics

PhD (Engineering), Kharkiv National University of Radioelectronics, Senior Lecturer of the Department of Computer-Integrated Technologies, Automation and Mechatronics

Inna Malaya, State Enterprise "Southern National Design & Research Institute of Aerospace Industries"

State Enterprise "Southern National Design & Research Institute of Aerospace Industries", Engineer

References

Nevlyudov, І. Sh., Andrusevich, A. A., Sotnik, S. V., Frolov, A. V. (2015), Tekhnologії іnformacіjno-poshukovih sistem. Kiїv: NAU. 336 p.

Kamar, M. R. (2009), Injection molding: Technology and fundamentals. Munich. Cincinnati: Hanser. 926 p.

Croft, W. B. (2015), Search Engines Information Retrieval in Practice. Pearson Education, Inc. 512 p.

Baeza-Yates, R. (1999), Information retrieval. New York: ACM/Addison-Wesley. ACM Press. 517 p.

Garg, A. (2010), Information Systems Development. LAP Lambert Academic Publishing. 180 р.

Manning, Ch. D. (2008), Introduction to Information Retrieval. 504 p.

Zhai, C. (2009), Statistical Language Models for Information Retrieval. Morgan & Claypool. 213 р.

Burceva, E. V. (2009), Informacionnye sistemy. Tambov: Izd-vo Tamb. gos. tekhn. un-ta. 128 p.

Visser, Dzh. (2017), Razrabotka obsluzhivaemyh programm na yazyke C#. Moscow: DMK Press. 192 p.

Chowdhury, G. G. (2010), Introduction to modern information retrieval. Facet publishing.

Nevlyudov, I. Sh. (2017), "Razrabotka bazy dannyh vybora ehlementov sistemy oformlyayushchih detalej". Tekhnologiya priborostroeniya. No. 3. P. 38-42.

Sharp, D. (2017), Microsoft Visual C#. Podrobnoe rukovodstvo. Piter. 848 p.

Mukhopadhyay, N. (2000), Probability and Statistical Inference. CRC Press. 690 p.

Downloads

How to Cite

Sotnik, S., Nevliudova, V., & Malaya, I. (2017). DEVELOPING THE INFORMATION SEARCH SYSTEM FOR SELECTING THE MOULDS FORMING ELEMENTS. INNOVATIVE TECHNOLOGIES AND SCIENTIFIC SOLUTIONS FOR INDUSTRIES, (2 (2), 86–92. https://doi.org/10.30837/2522-9818.2017.2.086

Issue

No. 2 (2) (2017)

Section

Technical Sciences

License

Copyright (c) 2018 Svetlana Sotnik, Viktoriia Nevliudova, Inna Malaya

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Our journal abides by the Creative Commons copyright rights and permissions for open access journals.

Authors who publish with this journal agree to the following terms:

  • Authors hold the copyright without restrictions and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

  • Authors are able to enter into separate, additional contractual arrangements for the non-commercial and non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

  • Authors are permitted and encouraged to post their published work online (e.g., in institutional repositories or on their website) as it can lead to productive exchanges, as well as earlier and greater citation of published work.