Theoretical substantiation of the zone action of the device for the solanaceae pest culture collection

Authors

DOI:

https://doi.org/10.15587/2313-8416.2018.145369

Keywords:

pest collection process, pest collection device, device coverage area

Abstract

It is determined that the main factor that influences the process of pest control in an environmentally friendly way using pneumatic devices is the design of the working body of assembly machines. An improved design of the pneumatic-type device for the collection of pests is proposed. Area of the device for collecting solanaceae pests is theoretically investigated. Three characteristic plots of changes of pests’ number that are under the influence of a device for collecting pests have been established and their values have been determined

Author Biographies

Vladimir Onopa, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropivnitsky, Ukraine, 25006

PhD, Associate professor

Department of Agricultural Engineering

Dmitriy Artemenko, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropivnitsky, Ukraine, 25006

PhD, Associate professor

Department of Agricultural Engineering

Roman Bakal, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropivnitsky, Ukraine, 25006

Department of Agricultural Engineering

References

Voloshina, N. M., Voloshin, O. S., Mostipan, T. V. et. al. (1991). Sistema zashhity s.-kh. kul'tur ot vrednykh organizmov v usloviyakh biologizatsii zemledeliya Kirovogradskoy oblasti. Kirovograd, 40.

Kononuchenko, V. V., Polozhenets, V. M. (2000). Suchasnyi stan vyrobnytstva kartopli v Ukraini ta problemy ekolohichnoi bezpeky. Visnyk DAAU "Problemy vyrobnytstva ekolohichno chystoi s.-h. produktsii". Zhytomyr: Vyd-vo DAAU, 27–28.

Savranchuk, V. V., Semeniaka, I. M., Mostipan, M. I. et. al. (2005). Naukovo-obgruntovana systema vedennia ahropromyslovoho vyrobnytstva v Kirovohradskii oblasti. Kirovohrad: PP "Lira LTD", 264.

Rudenko, I. E., Zubanov, A. P., Sherbinin, B. M., Chalenko, V. V. (1991). Bor'ba s vreditelyami pnevmosposobom. Zashhita rasteniy, 10, 16.

Bendera, I. M., Bondziak, V. I. et. al. (1996). Prystryi dlia zbyrannia koloradskoho zhuka. Naukovi rozrobky, rekomendovani vyrobnytstvu. Khmelnytskyi: TsNTEI, 46.

Kulikov, N. S., Bratus', A. F., Vinter, O. M. (1991). A.s. 1530158. SSSR. Ustroystvo dlya sbora nasekomykh. MKI A 01 M5/08. No. 4681253/15; declareted: 20.04.89; published: 30.10.91. Bul. No. 40, 3.

Khelifi, M., Laguë, C., Lacasse, B.; Vincent, C., Panneton, B., Fleurat-Lessard, F. (Eds.) (2001). Pneumatic control of insects in plant protection. Physical control methods in plant protection. Berlin: Springer-Verlag, 261–269. doi: http://doi.org/10.1007/978-3-662-04584-8_18

Lacasse, B., Lague, C., Khelifi, M., Roy, P. M. (1998). Effects of airflow velocity and travel speed on the removal of Colorado potato beetles from potato plants. Canadian Agricultural Engineering, 40 (4), 265–272.

Vincent, C., Boiteau, G.; Vincent, C., Panneton, B., Fleurat-Lessard, F. (Eds.) (2001). Pneumatic control of agricultural insect pests. Physical Control Methods in Plant Protection. La Lutte Physiqueen hytoprotection. New York: Springer-Verlag, 270–281. doi: http://doi.org/10.1007/978-3-662-04584-8_19

Rifai, M. N., Lacko-Bartosova, M., Minar, M. (1998). Possibilities for Non-chemical Control of Colorado Potato Beetle. Acta Technologica Agriculturae, Slovaca Universitas Agriculturae Nitriae, 24–27.

Rifai, M. N., Lacko-Bartosova, M., Minar, M. (1998). Effectiveness of Bio-Collector in Control of the Colorado Potato Beetle. Machinery and Technology for Sustainable Agriculture. Narodna Pobocka Istro na Slovensku, 4–6.

Matiash, V. (2002). Pro vyrobnytstvo ekolohichno chystykh produktiv, abo yak koloradskoho zhuka znyshchyty bez khimii. Propozytsiia, 2, 70–72.

Onopa, V. A., Petrenko, M. M., Kirichenko, A. M., Onopa, V. V. (2005). Dekl. pat. 8906 UA. Nasadka pristroyu dlya zbirannya komakh z roslin. MKI A01 M5/00. No. 200502778; declareted: 28.03.2005; published: 15.08.2005; Bul. No. 8.

Published

2018-10-23

Issue

Section

Technical Sciences