By the definition of the limit state in the three-layer cylinder with viscous filling

Authors

  • Газаля Сабир кызы Хейрабади Azerbaijan State Oil Academy St. Kadyrli, 75, Baku, Azeyrbadzhan, AZ106, Azerbaijan

DOI:

https://doi.org/10.15587/2313-8416.2015.37060

Keywords:

anticorrosive coating, displacement, deformation, stress, pressure, layer, condition of destruction

Abstract

In the article it is determined strained and deformed state of the three-layer cylinder, the inner layer of which is steel, the middle layer is visco elastic and anticorrosive and the outer layer, which is the protective layer of polymeric material. The values of the internal and external pressures, leading to the destruction of the layers, are determined

Author Biography

Газаля Сабир кызы Хейрабади, Azerbaijan State Oil Academy St. Kadyrli, 75, Baku, Azeyrbadzhan, AZ106

Assistant

Department "Applied Mechanics"

References

Sanzharovskij, V. T. (1970). Fiziko-mehanicheskie svojstva polimernyh lakokrasochnyh pokrytij. Moskow: Izdatel'stvo «Himija», 370.

Sedov, L. I. (1970). Mehanika slozhnoj sredy. Vol. 1. Moskow: Izdatel'stvo,. – 492 s.

Rabotnov, Ju. N. (1966). Polzuchesti jelementov konstrukcij. Moskow: «Nauka», 780.

Moskvitin, V. V. (1972). Soprotivlenie vjazko-uprugih materialov. Moskow: Izdatel'stvo «Himija», 370.

Amenzade, Ju. A. (1976). Teorija uprugosti. Moskow: Izdatel'stvo «Vysshaja shkola», 287.

Bugakov, I. I. (1973). Polzuchest' polimernyh materialov. Moskow: Izdatel'stvo “Nauka”, 287.

Published

2015-02-25

Issue

Section

Technical Sciences