DOI: https://doi.org/10.15587/2313-8416.2015.39196

Calculation of the lower operating limit of dual-flow plates with different geometrical characteristics

Gennadiy Taranenko

Abstract


We consider the calculation of lower limit of the effective work of dual-flow plates with different geometrical characteristics. In the equations is proposed to use the parameter T, that allows improve the accuracy of equations. The equations can be used to improve the methods of calculating the dual-flow plates


Keywords


dual-flow plates; column; hole diameter; calculation; equations

Full Text:

PDF

References


Zaycev, I. D. (1986). Proizvodstvo sody [Proizvodstvo sody]. Moscow, USSR: Chemistry, 312.

Kuznecov, V. Ya., Shebastyuk, I. M., Bol’shakova, L. N., Konkina, I. N. (2005). Opyt ispol’zovaniya tarel’chatogo absorbera dlia ulavlivaniya benzol’nyh uglevodorodov iz koksovogo gaza [Opyt ispol’zovaniya tarel’chatogo absorbera dlia ulavlivaniya benzol’nyh uglevodorodov iz koksovogo gaza]. Coke and Chemistry, 2, 22–23.

Tarat, E. Ya., Muhlenov, I. P., Tubolkin, A. F. et. al. (1977). Penny rejim i pennye apparaty [Penny rejim i pennye apparaty]. Leningrad, USSR: Chemistry, 303.

Kister, H. Z. (1990). Distillation Operation. New York, NY.: McGraw-Hill Professional, 729.

Albright, L. (2009). Albright’s chemical engineering handbook. Boca Raton, FL.: Taylor & Francis Group, LLC, 1912.

6. Green, D. W., Perry, R. H. (1999). Perry's Chemical Engineers' Handbook, Seventh Edition (Chemical Engineers Handbook). New York, NY.: McGraw-Hill Companies, Inc, 2582.

Taranenko, G. V. (2013). Gidravlicheskie i massoobmennye haracteristiki tarelok proval’nogo tipa s razlichnym diametrom otverstiy [Gidravlicheskie i massoobmennye haracteristiki tarelok proval’nogo tipa s razlichnym diametrom otverstiy]. Lugansk. izd-vo VNU im. V. Dalia, 174.

Tompson, Dg. M. T. (1990). Neustoychivye katastrofy v nauke i tehnike [Neustoychivye katastrofy v nauke i tehnike]. Moscow, USSR: Peace, 312.

Taranenko, G. V. (2014). Issledovanie gidrogazodinamicheskih harakteristik tarelok proval’nogo tipa [Issledovanie gidrogazodinamicheskih harakteristik tarelok proval’nogo tipa] Journal of East Ukrainian National University Dal. Science magazine, 9, 143–146.

Rozen, A. M., Martiushin, E. I., Olevsky, V. M. et. al. (1980). Masshtabny perehod v himicheskoy tehnologii [Masshtabny perehod v himicheskoy tehnologii]. Moscow, USSR: Chemistry, 320.

Taranenko, G. V. (2011). Issledovanie gidravlicheskogo soprotivleniya tarelok provalnogo tipa v kolonah razlichnogo diametra [Issledovanie gidravlicheskogo soprotivleniya tarelok provalnogo tipa v kolonah razlichnogo diametra] Journal of Sumy State University. Avg. Engineering, 1, 45–50.

Kasatkin, A. G., Dytnersky, Ju. I., Umarov, S. U. (1958). K raschetu kolonn c proval’nymi tarelrami [K raschetu kolonn c proval’nymi tarelrami] Chemical Industry, 3, 38–45.

Ruzinov, L. P. (1972). Statisticheskie metody optimizacii himicheskich processov [Statisticheskie metody optimizacii himicheskich processov]. Moscow, USSR: Chemistry, 200.


GOST Style Citations


1. Zaycev, I. D. Production of Soda [Text] / I. D. Zaycev, G. A. Tkach, N. D. Stroev. – M.: Chemistry, 1986. – 312 p.

2. Kuznecov, V. Ya. Experience in the use of the absorber plate to capture benzene hydrocarbons from coke oven gas [Text] / V. Ya. Kuznecov, I. M. Shebastiuk, L. N. Bol’shakova, I. N. Konkina // Coke and Chemistry. – 2005. – Vol. 2. – P. 22–23.

3. Tarat, E. Ya. Foam Regime and Foam Apparatus [Text] / E. Ya. Tarat, I. P. Muhlenov, A. F. Tubolkin et al.; I. P. Muhlenov, E. Ya. Tarat (Eds.). – L. : Chemistry, 1977. – 303 p.

4. Kister, H. Z. Distillation Operation [Text] / H. Z. Kister. – New York, NY.: McGraw-Hill Professional. 1990. – 729 p.

5. Albright’s chemical engineering handbook [Text] / L. Albright (Ed.). – Boca Raton, FL.: Taylor & Francis Group, LLC, 2009. – 1912 p.

6. Green, D. W. Perry's Chemical Engineers' Handbook, Seventh Edition (Chemical Engineers Handbook) [Text] / D. W. Green, R. H. Perry. – New York, NY. : McGraw-Hill Companies, 1999. – 2582 p.

7. Taranenko, G. V. Hydraulic and Mass Transfer Characteristics of the Dual-Flow Plates With Different Diameter Holes: monograph [Text] / G. V. Taranenko. – Lugansk: Publishing House VNU them. Dal, 2013. – 174 p.

8. Thompson, J. M. T. Instability and catastrophes in science and engineering [Text] / J. M. T. Thompson; trans. from English. – Moscow: Mir, 1990. – 312 p.

9. Taranenko, G. V. Investigation of the hydrogasdynamic characteristics of -dual-flow plates [Text] / G. V. Taranenko // Journal of East Ukrainian National University Dal. Science Journal. – 2014. – Vol. 9. – P. 143–146.

10. Rosen, A. M. A Large-Scale Transitionin Chemical Technology: Development Of Industrial Apparatus By Hydrodynamic Modeling [Text] / A. M. Rosen, E. I. Martyushin, V. M. Olevsky et al.; A. M. Rosen (Ed.). – M.: Chemistry, 1980. – 320 p.

11. Taranenko, G. V. Investigation of pressure drop dual-flow plate in columns of different diameters [Text] / G. V. Taranenko // Bulletin of Sumy State University. Avg. Engineering. – 2011. – Vol. 1. – P. 45–50.

12. Kasatkin, A. G. Chemical Industry [Text] / A. G. Kasatkin, Yu. I. Ditnersky, U. S. Umarov. – 1958. – Vol. 3. – P. 38–45.

13. Ruzinov, L. P. Statistical methods optimizing chemical processes [Text] / L. P. Ruzinov. – Moscow: Chemistry, 1972. – 200 p.







Copyright (c) 2015 Gennadiy Taranenko

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN 2313-8416 (Online), ISSN 2313-6286 (Print)