Using software controlled firing mechanism to study the elastic properties of materials

Authors

  • Василь Михайлович Дюрик Uzhgorod National University 14 Universitetskaya str., Uzhgorod, Ukraine, 88000, Ukraine
  • Іван Іванович Небола Uzhgorod National University 14 Universitetskaya str., Uzhgorod, Ukraine, 88000, Ukraine
  • Олександр Михайлович Дюрик Uzhgorod National University 14 Universitetskaya str., Uzhgorod, Ukraine, 88000, Ukraine
  • Марія Олексіївна Дюрик Kam'yanytskoyi secondary school art. 22 Uzhansky str., Buildings, Uzhgorod region, Ukraine, 89411, Ukraine

DOI:

https://doi.org/10.15587/2313-8416.2015.46216

Keywords:

mechanical systems, software mach3, drums, firing vibrations, stepper motors, program control, audio signal

Abstract

The program control device of mechanical movement that allows strikes on the surface generating audio signal was described. The sound signals generated by different surfaces were studied, their analysis and comparison was made. The usage of control device for study of audio signals of different origin was shown

Author Biographies

Василь Михайлович Дюрик, Uzhgorod National University 14 Universitetskaya str., Uzhgorod, Ukraine, 88000

Department of Applied Physics

Іван Іванович Небола, Uzhgorod National University 14 Universitetskaya str., Uzhgorod, Ukraine, 88000

Professor, Doctor of Physical and Mathematical Sciences

Department of Applied Physics

Олександр Михайлович Дюрик, Uzhgorod National University 14 Universitetskaya str., Uzhgorod, Ukraine, 88000

postgraduate

Department of Applied Physics

Марія Олексіївна Дюрик, Kam'yanytskoyi secondary school art. 22 Uzhansky str., Buildings, Uzhgorod region, Ukraine, 89411

Senior teacher

Teacher of Physics

References

RFDA basic. Available at: http://www.imce.eu/rfda-mf-basic

Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration. Available at: http://www.astm.org/Standards/E1876.htm

Radovic, M., Lara-Curzio, E., Riester, L. (2003). Comparison of different experimental techniques for determination of elastic properties of solids. Materials Science and Engineering, 28 (12), 56–57.

Buzz-o-sonic use the Impulse Excitation Technique. Available at: http://www.buzzmac.com/impulse-excitation.html

Stepper motor 23HS8430. Available at: http://cnc.prom.ua/p4348106-dvigatel-shagovyj-30a.html

Driver stepper motor TB6560 V2. Available at: http://www.e-voron.dp.ua/files/pdf/Cnc/TB6560DRV2_ru.pdf

Switching Power Supply 350W. Available at: http://www.interinar.com/public_docs/S-350-24.pdf

Downloads

Published

2015-07-26

Issue

Vol. 7 No. 2 (12) (2015)

Section

Technical Sciences

License

Copyright (c) 2015 Василь Михайлович Дюрик, Іван Іванович Небола, Олександр Михайлович Дюрик, Марія Олексіївна Дюрик

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.

Authors, who are published in this journal, agree to the following conditions:

1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.

 2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.