Investigation and optimization of raw material preparation for oil extraction oil by pressing

Authors

  • Владислав Павлович Самодуров Odessa National Polytechnic University 1 Shevchenko ave., Odessa, Ukraine, 65000, Ukraine

DOI:

https://doi.org/10.15587/2313-8416.2015.54089

Keywords:

weight, model, parameter, preparation, flow, management, real production complex, raw material, system, heat

Abstract

Based to real production complex it was developed and implemented a mathematical model of a separate section of sunflower oil production, such as raw material preparation area for extraction oil. The main parameters that influence the process of preparation and their dependence on physical features of realization of production were analyzed and introduced

Author Biography

Владислав Павлович Самодуров, Odessa National Polytechnic University 1 Shevchenko ave., Odessa, Ukraine, 65000

Department of Automation of Thermal Processes

Institute of Power Engineering and Computer Integrated Control Systems

References

Oil mills and oil extraction production. Available at: http://www.vehi.net/brokgauz/all/064/64834.shtml

Devrien, A. F. (Ed.) (1909). Masloboinoye proizvodstvo [oil mills production]. St. Petersburg, 208.

Kedrov, B. M. (Ed.) (1958). Periodicheskiy zakon [Periodic law]. Moscow, USSR: Publisher Academy of Sciences of USSR, 827.

Reference chemist 21. Available at: http://chem21.info/info/801141/

Matyuxov, D. V., Gladkiy, F. F. (2013). Vpliv tehnologichnix parametriv na rezultati ekstrakcii sonyashniky etilovim spirtom [Influence of process parameters on the results of extraction meal of sunflower with ethanol]. Announcer of national technologic university “Kharkiv technologic institute”, 132–138.

Vasilenko, V. V. (2006). Matematicheskoe modelirovanie i sovershenstvovanie ekstrakcionnoy pererabotki maslichnogo materiala s povyshennoy temperaturoy [Mathematical modeling and improving the extraction processing of the oilseed material with a high temperature]. Kuban State Technological Institute, Krasnodar, 21.

Published

2015-11-23

Issue

Section

Technical Sciences