Increase of durability for torsion shafts and long details by surface plastic deformation

Authors

  • Іван Семенович Афтаназів National University "Lviv Polytechnic" 12 Bandera str., Lviv, Ukraine, 79013, Ukraine
  • Лілія Іванівна Шевчук National University "Lviv Polytechnic" 12 Bandera str., Lviv, Ukraine, 79013, Ukraine
  • Орися Іванівна Строган National University "Lviv Polytechnic" 12 Bandera str., Lviv, Ukraine, 79013, Ukraine

DOI:

https://doi.org/10.15587/2313-8416.2016.67693

Keywords:

hardening, impact, steel, detail, thickness, deformation, surface

Abstract

Device for hardening of external cylindrical surfaces of long details by surface plastic deformation is proposed. Device provides an impact interaction of surface of the detail with massive hardener that eccentrically mounted on it. Spherical deformable bodies are set on working surface of the hardener. Manageable depth for hardening of constructional steel details is 0,10 ÷ 0,20 mm

Author Biographies

Іван Семенович Афтаназів, National University "Lviv Polytechnic" 12 Bandera str., Lviv, Ukraine, 79013

Doctor of Technical Sciences, Professor

Department of descriptive geometry and engineering graphics

Лілія Іванівна Шевчук, National University "Lviv Polytechnic" 12 Bandera str., Lviv, Ukraine, 79013

Doctor of Technical Sciences, Associate Professor

Department of Technology of Organic Products

Орися Іванівна Строган, National University "Lviv Polytechnic" 12 Bandera str., Lviv, Ukraine, 79013

Candidate of Technical Sciences, assistant

Department of descriptive geometry and engineering graphics

References

Aftanaziv, I. S. et. al (2004). Tehnologichni metody zabezpechennja nadijnosti mashyn. Kyiv: KYT, 148.

Aftanaziv, I. S. et. al (2001). Pidvyshhennja nadijnosti detalej mashyn poverhnevym plastychnym deformuvannjam. Zhytomyr: ZhITI, 516.

McCormick, D. (1981). Shot peen gears for longer life. Design Eng., 52 (7), 49–52.

Zanevskij, I. F. (1980). Dinamika i raschet protjazhennyh vibracionnyh mashin dlja obrabotki dlinnomernyh izdelij. Lvov, 1980.

Aftanaziv, I. S., Kusyj, Ja. M. (2002). Pat. Ukrai'ny na vynahid № 51720. Prystrij dlja zmicnennja poverhon' dovgomirnyh cylindrychnyh detalej. opubl. 2002; Bjul. № 12.

Dzjunkiti, I., Josioki, A., Sjecuko, H. (1966). O samosinhronizacii vibratorov. Chast' 1. Vrashhenie neuravnoveshennogo rotora, zavisjashhee ot garmonicheskih kolebanij ego osi. Nihon Kikaj gakkaj roibuesju, 234.

Blehman, I. I. (1971). Sinhronizacija dinamicheskih sistem. Mosvow: «Nauka», 896.

Aftanaziv, I. S., Bernik, P. S., Sivak, R. I., Klimenko, A. D. (2002). Vibracionno-centrobezhnaja uprochnjajushhaja obrabotka detalej mashin. Vinnica: VGAU, 235.

Povidajlo, V. A., Korshunov, Ju. Ju., Anikin, V. V., Aftanaziv, I. S., Shhigel', V. A. (1981). A. s. № 831581 (SSSR) Sposob uprochnenija detalej. zajavl. 17.10.78; opubl. 23.05.81; Bjul. № 19.

Povidajlo, V. A., Shhigel', V. A., Aftanaziv, I. S. (1982). A. s. № 910396 (SSSR) Sposob uprochnenija detalej. opubl. V B.I.; 1982; Bjul. № 9.

Downloads

Published

2016-04-29

Issue

Vol. 4 No. 2 (21) (2016)

Section

Technical Sciences

License

Copyright (c) 2016 Іван Семенович Афтаназів, Лілія Іванівна Шевчук, Орися Іванівна Строган

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.

Authors, who are published in this journal, agree to the following conditions:

1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.

 2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.