Binder feed control on automated mixture preparation section of foundry at engineering enterprise
DOI:
https://doi.org/10.15587/2313-8416.2016.69839Keywords:
molding sand, computer-integrated technology, mixture preparation section, controller synthesisAbstract
Problems of binder batching process automation in particular in the synthesis of binder flow controller in the batch mixer operated at mixture preparation section of foundry at engineering enterprise are studied. It is shown that the use of engineering methods for controller synthesis with an acceptable accuracy allows obtaining high-quality mixture and, consequently, improving general-purpose castings
References
Milosan, I. (2014). The Manufacturing of a Special Wear-resistant Cast Iron Used in Automotive Industry. Procedia – Social and Behavioral Sciences, 109, 610–613. doi: 10.1016/j.sbspro.2013.12.515
An, W., Cai, A., Luo, Y., Chen, H., Liu, W., Li, T., Chen, M. (2009). Optimization of composition of as-cast chromium white cast iron based on wear-resistant performance. Materials & Design, 30 (7), 2339–2344. doi: 10.1016/j.matdes.2008.11.003
Bedolla-Jacuinde, A., Guerra, F. V., Mejía, I., Zuno-Silva, J., Rainforth, M. (2015). Abrasive wear of V–Nb–Ti alloyed high-chromium white irons. Wear, 332-333, 1006–1011. doi: 10.1016/j.wear.2015.01.049
Kostik, K. O. (2015). Development of the high-speed boriding technology of alloy steel. Eastern-European Journal of Enterprise Technologies, 6/11 (78), 8–15. doi: 10.15587/1729-4061.2015.55015
Kostyk, K. O., Kostyk, V. O. (2014). Porivnjal'nyj analiz vplyvu gazovogo ta ionno-plazmovogo azotuvannja na zminu struktury i vlastyvostej legovanoi' stali 30H3VA. Visnyk Nacional'nogo tehnichnogo universytetu «HPI». Serija: Novi rishennja u suchasnyh tehnologijah, 48, 21–41.
Akimov, O. V., Marchenko, A. P. (2008). Jeksperimental'nye issledovanija i komp'juternoe modelirovanie materialov dlja blok-kartera DVS. Eastern-european journal of enterprise technologies, 5/1 (35), 52–57. Available at: http://www.nbuv.gov.ua/old_jrn/natural/Vejpt/2008_5_1/EEJET_5_1_2008_52-57.pdf
Akimov, O. V. (2003). Analiz pogreshnostej formoobrazovanija otlivok koles turbin turbokompressorov dlja nadduva DVS na jetape izgotovlenija ih voskovyh modelej. Vostochno-Evropejskij zhurnal peredovyh tehnologij, 3, 16–24.
Akimov, O. V., Anackij, Ju. P., Soloshenko, V. A. (1999). Analiz sobstvennyh kolebanij otlivki blok-kartera dizelja “SMD”. Vestnik Har'kovskogo gosudarstvennogo politehnicheskogo universiteta. Kharkov: HGPU, 66, 40–47.
Demin, D. A., Pelikh, V. F., Ponomarenko, O. I. (1995). Optimization of the method of adjustment of chemical composition of flake graphite iron. Litejnoe Proizvodstvo, 7-8, 42–43.
D'omin, D. O. (1995). Dejaki aspekty upravlinnja jakistju chavunu z plastynchastym grafitom. Kharkiv, 181.
Demin, D. A., Pelikh, V. F., Ponomarenko, O. I. (1998). Complex alloying of grey cast iron. Litejnoe Proizvodstvo, 10, 18–19.
Evtushenko, N. S., Shinskij, O. I., Ponomarenko, O. I. (2013). Issledovanie svojstv regeneriruemyh smesej na osnove OFOS. Kompressornoe i jenergeticheskoe mashinostroenie, 4, 48–51.
Berlizeva, T. V., Ponomarenko, O. I., Karateev, A. M., Litvinov, D. A. (2013). Vlijanie furfuriloksipropilciklokarbonatov (FOPCK) s razlichnymi dobavkami na svojstva holodnotverdejushhih smesej na zhidkom stekle. Kompressornoe i jenergeticheskoe mashinostroenie, 3, 26–29.
Ponomarenko, O. I., Evtushenko, N. S., Berlizeva, T. V. (2011). Vlijanie zhidkih otverditelej s raznymi dobavkami na svojstva zhidkostekol'nyh smesej. Litejnoe proizvodstvo, 4, 21–24.
Webac – Gesellschaft für Maschinenbau mbH. Available at: http://www.webac-gmbh.de/
Maschinenfabrik Gustav Eirich GmbH & Co KG. Available at: http://www.eirich.ru/
Demin, D. A. (2012). Synthesis of optimal temperature regulator of electroarc holding furnace bath. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 6, 52–58.
Djomin, D. A. (2011). Metodologija formirovanija funkcionala dlja zadachi optimal'nogo upravlenija jelektroplavkoj. Technology audit and production reserves, 1/1 (1), 15–24. Available at: http://journals.uran.ua/tarp/article/view/4082/3748
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Татьяна Александровна Егоренко, Александр Алексеевич Радченко, Алла Вячеславовна Дяченко, Анастасия Александровна Михайлова
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
