Calculation of pressure drop of dual-flow plates in the regime of mobile gas-liquid layer
DOI:
https://doi.org/10.15587/2313-8416.2016.71716Keywords:
plate, drug, equation, hole, hydraulic, experimental, gas-liquid, regime, geometric, characteristicAbstract
As a result of the processing the experimental data to determine the pressure drop of dual-flow plates, criteria equations were obtained to determine the pressure drop of the gas-liquid layer on dual-flow plates. Plates were studied on model system «water – air». Free cross-section of plates was 16, 25 and 36 %, a diameter of the holes of plates was 0.012 m, diameter of the plates was 0.15 m
References
Dilman, V. V., Darovskih, E. P., Ajerov, M. E. et. al (1956). O gidravlichskom soprotivlenii reshetchatyh I dyrchatyh tarelok [About the hydraulic resistance grid and perforated plates]. Chemical industry, 3, 156–161.
Sum-Shik, L. E., Aerov, M. E., Bystrova, T. A. (1962). O gidravlicheskom soprotivlenii kolonn s besperilivnymi tarelkami [On hydraulic calculation of columns with dual-flow plates]. Chemical industry, 7, 530–532.
Sum-Shik, L. E., Aerov, M. E., Bystrova, T. A. (1963). Issledovanie unosa I gidravlichesky raschet kolonn s besperilivnymi tarelkami [Study drop entrainment and hydraulic calculation columns with dual-flow plates]. Chemical industry, 1, 63–68.
Kasatkin, A. G., Dytnerskij, Ju. I., Umarov, S. U. (1958). K raschetu kolonn s proval’nymi tarelkami [Calculation of columns with dual-flow plates]. Chemical industry, 3, 38–45.
Kasatkin, A. G., Dytnerskij, Ju. I., Popov, D. M. (1961). Gidravlichskie zakonomernosti procesov na bardotajnyh tarelkah proval’nolo tipa [Hydraulic regularities of the processes on bubble plates dual-flow of type]. Chemical industry, 7, 482–491.
Molokanov, Ju. K. (1962). Opredelenie soprotivleniya reshetchatyh tarelok proval’nolo tipa [Determination resistance grid plates dual-flow of type]. Chemistry and Technology of Fuels and Oils, 3, 41–48.
Kasatkin, A. G. (1973). Osnovnye protsesy i apparaty himicheskoy tehnologii [Basic processes and apparatuses of chemical technology]. Moscow: Chemistry, 752.
Taranenko, G. V. (2013). Gidravlichskie i massoobmennye harakteristiki tarelok proval’nogo tipa s pazlichnym diametrom otversty [Hydraulic and mass transfer characteristics of the dual-flow plates with different diameter holes]. Lygansk: VNU. V. Dahl, 174.
Taranenko, G. V. (2016). Research of local gas content of gas-liquid layer for different operating regimes of dual-flow plates. ScienceRise, 5/2 (22), 60–64. doi: 10.15587/2313-8416.2016.69075
Taranenko, G. V. (2015). Calculation of the lower operating limit of dual-flow plates with different geometrical characteristics. ScienceRise, 3/2 (8), 67–73. doi: 10.15587/2313-8416.2015.39196
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Геннадий Владимирович Тараненко
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
