The complex systems parameters mathematical modeling and optimization by global connectivity in CAD
DOI:
https://doi.org/10.15587/2313-8416.2016.77768Keywords:
optimizing arguments, restrictions, global connectivity between arguments of the systems, electrical equipmentAbstract
The design problems arising in multi-purpose optimization of systems with weakly bound arguments were analyzed. A classification of constraints on optimization arguments was done. The concept of "global connectivity" as interparametric limitation affecting virtually all the design and consumer properties of the system was introduced. Method of the global connectivity system optimization was developed on example of electrical equipment, which test provided a positive technical effect
References
Vorobev, V. E., Ryabuha, V. I., Tomov, A. A. (2000). Raschet trehfaznyih asinhronnyih dvigateley s korotkozamknutyim rotorom. Sankt-Peterburg: SZPI, 151.
IEEE 112. IEEE Standard Test Procedure for Polyphase Induction Motors and Generators (2004). New York. doi: 10.1109/ieeestd.2004.95394
Duhanina, M. A., Lebedeva, E. Yu., Shvets, P. S., Odukalets, L. A. (2013). Evolyutsionnaya optimizatsiya slabosvyazannyih system. Zbіrnуk naukovуh prats Institutu problem modelyuvannya v energetitsі іm. G. S. Puhova. Kуiv, 67, 74–81.
Shvets, P., Lebedeva, O., Bondarenko, V. (2015). The computer-aided design of rubber-metal products. Odes’kyi Politechnichnyi Universytet. Pratsi, 3, 36–40. doi: 10.15276/opu.3.47.2015.10
Sidorova, N. V., Dotsenko, Yu. V., Perperі, A. O. (2008). Optimіzatsіya silIkatnih materіalіv neavtoklavnogo tverdіnnya po kompleksu kriterіуiv yakostі z vikoristannyam elementіv aksonometrіуi. Pratsі tavriyskogo derzhavnogo agrotehnologichnogo universitetu. Prikladna geometriya ta inzhenerna grafIka, Melitopol, 39 (4), 119–122.
Stupichnyiy asinhronnyiy tyagovyiy dvigatel s vneshnim rotorom (2001). H. Neudorfer. Glasers Annalen, 6/7, 237–242.
Primenenie asinhronnyih elektrodvigateley (2014). Available at: http://lesopilka777.ru/raznotematicheskoe/81-poleznye-materialy/718rimjenjenijeasinkhronnykheljektrodvigatjeljej.html
Gorohov, V. L., Lukin, A. N., Zhigalova, G. M. (2008). Raschet asinhronnyih dvigateley. Moscow: MGTU, 91.
Kopyilov, I. P., Klokov, B. K., Morozkin, V. P., Tokarev, B. F. (2005). Proektirovanie elektricheskih mashin. Moscow: Vyisshaya shkola, 767.
Liang, X., Ilochonwu, O. (2011). Induction Motor Starting in Practical Industrial Applications. IEEE Transactions on Industry Applications, 47 (1), 271–280. doi: 10.1109/tia.2010.2090848
"Induction (Asynchronous) Motors" (2012). Mississippi State University Dept of Electrical and Computer Engineering, Course ECE 3183, 'Electrical Engineering Systems for non-ECE majors'.
Grinchenko, V. A. (2013). Obosnovanie bazovoy konstruktsii lineynogo elektrodvigatelya. Theoretical & Applied Science, 1/11 (7), 58–60.
Shabalov, P. G., Galkin, E. F. (2005). Aviatsionnyiy elektroprivod. Samara: SGAU, 52.
Ozyurt, C. H. (2005). Parameter and Speed Estimation of Induction Motors from Manufacturers Data and Measurements. Middle East Technical University, 33–34.
Bakulin, A. S. Kudrinskaya, K. I., Kui, P.A., Mosin, E. T., Pronin, V. A., Fedorov, E. A. (1979). Sooruzheniya, ustroystva i podvizhnyiy sostav metropolitena. Moscow: Transport, 239.
Markovich, I. M. (1963). Rezhimyi energeticheskih sistem. Moscow: Gosenergoizdat, 360.
Upravlenie po ogranicheniyam. Available at: http://www.businesstuning.ru/op/219-upravlenie-po-ogranicheniyam.html
Shvets, P. S., Monova, D. A., Bondarenko, V. V., Oborotova, E. A. (2016). Multi-objective optimization of the objects with coupled parameters using the sliding window method. ScienceRise, 4/2 (21), 31–36. doi: 10.15587/2313-8416.2016.67616
Aleksandrov, V. F., Ezerskiy, V. G., Zaharov, O. G., Malyishev, V. S. (2007). Chastotnaya razgruzka v energosistemah. Moscow: NTF «Energoprogress», 76.
Stanovskiy, O. L., Shvets, P. S., Toropenko, A. V., Bondarenko, V. V., Stanovskiy, A. O., Abu Shena, O., Krasnozhon, O. M. (2015). Optimizatsiya zvyaznosti elementiv v zadachah avtomatizovanogo proektuvannya system. Visnyk NTU «HPI», 49 (1158), 170–175.
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Александр Леонидович Становский, Павел Степанович Швец, Виктор Владимирович Бондаренко, Алексей Викторович Торопенко
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
