Development of methods for determination of Kotrechko hardness of wood and laminated plastics

Authors

DOI:

https://doi.org/10.15587/2313-8416.2017.97882

Keywords:

wood, laminated plastics, hardness, anisotropy, indenter, triangular prism, blade, loading

Abstract

New methods for hardness determination of wood and laminated plastic taking into account anisotropy of their properties are developed. The hardness of the wood and laminated plastics explores at the angles to the direction of the fibers. Triangular prism with the ends that cut towards working blade is used as the intender. Hardness indicators obtained using these methods is more accurate than using existing ones

Author Biography

Alexei Kotrechko, National University of Life and Environmental Sciences of Ukraine Heroyiv Oborony str., 15, Kyiv, Ukraine, 03041

PhD, Associate professor

Department of Technical Reliability

References

Schwarz, M. V., Buos, K. (1928). Holzhärteprüfung mit dem Falhärteprüfer. Maschinenbau, 12, 403.

Buruchenko, S. I. (1930). A. S. № 14853 SSSR. G01N03/42.

Shipilina, N. L. (1963). A. S. № 157145 SSSR. G01N03/42.

Rozengauz, B. F. (1956). K izmereniyu torcevoj tverdosti drevesiny. Sbornik trudov ULTI, 1.

Puppe, A. G. (1930). A. S. № 4081 SSSR. G01N03/40.

GOST 16483.17-81 (ST SEHV 2366-80 i ISO 3350-75) (1983). Wood. Method for determination of static hardness. Moscow.

Pamfilov, E. A., Sheveleva, E. V., Komissarov, A. P. (2008). Pat. No. 2323428 RU. Sposob opredeleniya staticheskoj tverdosti drevesiny. MPK G01N3/42. declareted: 08.09.2006; published: 27.04.2008, Bul. No. 12.

GOST 24622-91 (ISO 2039/2-87) (1993). Plastics. Determination of hardness. Rockwell hardness. Moscow.

Kotrechko, O. O. (2006). Pat. No. 12460 UA. Indentor. MPK G01N3/42. No. u200506505; declareted: 01.07.2005; published: 15.02.2006, Bul. No. 2.

Kotrechko, O. O. (2014). Pat. No. 90564 UA. Sposib vyznachennya statychnoyi tverdosti derevyny za Kotrechkom. MPK G01N3/40. No. a201110631; declareted: 11.03.2013; published: 10.06.2014, Bul. No. 11.

Kotrechko, O. O. (2013). Pat. No. 83113 UA. Indentor dlya vyznachennya tverdosti plastmas. MPK G01N 3/42. No. u201303076; declareted: 12.03.2013; published: 27.08.2013, Bul. No. 16.

Kotrechko, O. O. (2012). Pat. No. 100471 UA. Metod vyznachennya tverdosti plastmas po Kotrechku. MPK G01N3/00. No. a201109936; declareted: 10.08.2011; published: 25.12.2012, Bul. No. 24.

Published

2017-04-21

Issue

Section

Technical Sciences