The worm-gear extruder during processing the polymeric materials

Authors

  • Дарина Андріївна Степанюк National Technical University of Ukraine “Kyiv Polytechnic Institute” pr. Pobedy, 37, Kyiv, Ukraine, 03056, Ukraine
  • Микола Петрович Швед National Technical University of Ukraine “Kyiv Polytechnic Institute” pr. Pobedy, 37, Kyiv, Ukraine, 03056, Ukraine
  • Дмитро Миколайович Швед National Technical University of Ukraine “Kyiv Polytechnic Institute” pr. Pobedy, 37, Kyiv, Ukraine, 03056, Ukraine

DOI:

https://doi.org/10.15587/2313-8416.2015.38997

Keywords:

extruder, gear pumps, homogenization, dosage, pulsation, polymer, pressure gradient, worm, gaps, shaping tool

Abstract

The paper presents the analysis of the main schemes of extrusion plants, and the main parameters that affect the performance pulsation in worm extruder without gear pumps.

It is considered analysis and experimental research of productivity and its fluctuations in the classic worm extruder and in the same extruder with gear pump

Author Biographies

Дарина Андріївна Степанюк, National Technical University of Ukraine “Kyiv Polytechnic Institute” pr. Pobedy, 37, Kyiv, Ukraine, 03056

Department of machines and apparatus chemical and petrochemical industries

Микола Петрович Швед, National Technical University of Ukraine “Kyiv Polytechnic Institute” pr. Pobedy, 37, Kyiv, Ukraine, 03056

PhD, Docent

Department of machines and apparatus chemical and petrochemical industries

Дмитро Миколайович Швед, National Technical University of Ukraine “Kyiv Polytechnic Institute” pr. Pobedy, 37, Kyiv, Ukraine, 03056

Senior Engineer

Department of machines and apparatus chemical and petrochemical industries

References

Rauvendaal, K. (2006). Extrusion of polymers. St. Petersburg, Profession, 768.

McKelvie, D. M. (1965). Plastics Processing. Moscow, Chimie, 442.

Tadmor, Z., Klein, T. (1970). Engineering Principles of Plasticating Extrusion. Modern Plastics., 6, 46–54

Tag name：High-speed extrusion State All about processing of plastics. Available at: http://plastweb.ru/tag/vyisokoskorostnaya-ekstruziya/

Collings, S. (1982). Plastics Machinery and Equipment. Nature, 2, 26–29.

Rauwendaal, C., M. (2008). Troubleshooting the Extrusion Process. St. Petersburg, Profession, 328.

Tadmor, Z., Gogos, K. (1984). Theoretical foundations of extrusion polymers. Moscow, Chimie, 632.

Radchenko, L. B. (1999). Processing of Thermoplastics by Extrusion. Kiev, IZMN, 220.

V. Kuzmin, Y., Kornienko, M., Swede, D. (2012). Swede of Research of the productivity of cog-wheel pump is in a line for the production of sleeve tape. Chemical engineering, ecology and ресурсозбереження producing, 1.

Swede, М., Swede, D., Stepaniuc, D. Worm-cog-wheel extruder at processing of polymeric materials. Odesa national academy of food technologies, producing, 3 (45), 173–175.

Downloads

Published

2015-03-24

Issue

Vol. 3 No. 2 (8) (2015)

Section

Technical Sciences

License

Copyright (c) 2015 Дарина Андріївна Степанюк, Микола Петрович Швед, Дмитро Миколайович Швед

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.

Authors, who are published in this journal, agree to the following conditions:

1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.

 2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.