Analysis free oscillations of a non-homogeneous pipe along's thickness and length, taking into account the resistance of the external environment

Authors

  • Gulnar Mirzayeva Institute of Mathematics and Mechanics National Academy of Sciences of Azerbaijan, 9 B, Vahabzadeh str., Baku, Republic of Azerbaijan, AZ1143, Ukraine https://orcid.org/0000-0003-0362-3492
  • Vusala Rzayeva Institute of Mathematics and Mechanics National Academy of Sciences of Azerbaijan, 9 B, Vahabzadeh str., Baku, Republic of Azerbaijan, АZ1143, Ukraine https://orcid.org/0000-0001-8669-1612

DOI:

https://doi.org/10.15587/2706-5448.2020.213475

Keywords:

non-homogeneous pipe, environment with complex properties, Winkler model, Pasternak model, Karnet model.

Abstract

Structural elements made of heterogeneous natural and artificial materials are widely used in the construction of modern building complexes and in many other areas. Among them is the use of boards and shells of different configurations. Currently, one of the most important requirements for designers and accountants is to properly assess the mechanical properties of the material of the structural element and the impact of the environment in contact during operation. Taking these into account, the mathematical solution of the problem becomes difficult, and if not, serious mistakes can be made. One of the most problematic places is considering the resistance of the external environment.

Objects of research are modern pipes exposed to the external environment.

In the paper is analysis Pasternak is one of the mathematical models that accurately reflects the elastic real properties of the environment, the model Winkler, which is characterized by two constants, the model of Karnet and the model of Rjanitsin. And is analysis their effected.

In the course of the research, the method of separation of variables and then Bubnov-Galerkin method is used, which explain relationship between the dimensionless value of frequency, the parameters that characterize the non-homogeneous of the base, and the pipe. The selection of special frequencies is carried out by selecting the corresponding special equation and boundary conditions. There are nonlinear algebraic equations and their solution using computer technology. It is shown that when the mechanical properties of the pipe vary in length, the above solution method does not work and the determination of the characteristic parameters must be performed using other approximate analytical methods. In engineering practice, it is usually sufficient to find the basic tone of the frequency. As a result of the research it is shown that the external environment effects are important for non-homogeneous pipe and should be considered in the design of the structure-ground interaction. In the future, the proposed approach and should be considered in the design of the structure non-homogenous pipe interaction.

Author Biographies

Gulnar Mirzayeva, Institute of Mathematics and Mechanics National Academy of Sciences of Azerbaijan, 9 B, Vahabzadeh str., Baku, Republic of Azerbaijan, AZ1143

PhD, Senior Researcher

Department of Theory of Elasticity and Plasticity

Vusala Rzayeva, Institute of Mathematics and Mechanics National Academy of Sciences of Azerbaijan, 9 B, Vahabzadeh str., Baku, Republic of Azerbaijan, АZ1143

Master

Department of Wave Dynamics

References

  1. Kolchin, A. S., Favarion, E. A. (1977). Teoriia uprugosti neodnorodnykh tel. Kishinev, 146.
  2. Kerr, A. D. (1964). Elastic and Viscoelastic Foundation Models. Journal of Applied Mechanics, 31 (3), 491–498. doi: http://doi.org/10.1115/1.3629667
  3. Pasternak, P. L. (1954). O novom metode rascheta uprugogo osnovaniia s pomoschiu dvukh fundamentnykh postoiannykh. Moscow: Gosudarstvennoe izdatelstvo literatury po stroitelstvu i arkhitekture, 1, 1–56.
  4. Garnet, H., Levy, A. (1969). Free Vibrations of Reinforced Elastic Shells. Journal of Applied Mechanics, 36 (4), 835–844. doi: http://doi.org/10.1115/1.3564779
  5. Timoshenko, S. P. (1967). Kolebaniia v inzhenernom dele. Moscow: Nauka, 444.
  6. Haciyev, V. C., Mirzeyeva, G. R., Shiriyev, A. I. (2018). Effect of Winkler foundation, inhomogeneity and orthotropy on the frequency of plates. Journal of Structural Engineering & Applied Mechanics, 1 (1), 1–5. doi: http://doi.org/10.31462/jseam.2018.01001005
  7. Haciyev, V. C., Sofiyev, A. H., Mirzeyev, R. D. (1996). Free vibration of non-homogeneous elastic rectangular plates. Proceedings of the Institute of Mathematics and Mechanics, 4, 103–108.
  8. Antoranz, A., Gonzalo, A., Flores, O., García-Villalba, M. (2015). Numerical simulation of heat transfer in a pipe with non-homogeneous thermal boundary conditions. International Journal of Heat and Fluid Flow, 55, 45–51. doi: http://doi.org/10.1016/j.ijheatfluidflow.2015.05.007
  9. Haciyev, V. C., Mirzoeva, G. R., Agayarov, M. G. (2019). Free vibrations of anisotropic rectangular plate laying on a heterogeneous viscouselastic basis. Structural Mechanics of Engineering Constructions and Buildings, 15 (6), 470–476. doi: http://doi.org/10.22363/1815-5235-2019-15-6-470-476
  10. Fares, M. E., Zenkour, A. M. (1999). Buckling and free vibration of non-homogeneous composite cross-ply laminated plates with various plate theories. Composite Structures, 44 (4), 279–287. doi: http://doi.org/10.1016/s0263-8223(98)00135-4

Downloads

Published

2020-10-30

How to Cite

Mirzayeva, G., & Rzayeva, V. (2020). Analysis free oscillations of a non-homogeneous pipe along’s thickness and length, taking into account the resistance of the external environment. Technology Audit and Production Reserves, 5(1(55), 24–27. https://doi.org/10.15587/2706-5448.2020.213475

Issue

Section

Reports on research projects