Research results of working body of fertilizing machine

Authors

  • Наталія Олександрівна Пономаренко Dnipropetrovsk State Agrarian University of Economics, st. Voroshilov, 25, Dnipropetrovsk, 49000, Ukraine https://orcid.org/0000-0002-2838-7046

DOI:

https://doi.org/10.15587/2312-8372.2014.34170

Keywords:

mineral fertilizers, fertilizer centrifugal spreader, blases, centrifugal working body, disc

Abstract

The fertilizer centrifugal spreaders not provide uniformity of application of the process material. The high cost of fertilizers and crop losses provoke to address the problem of uneven application of fertilizers. This problem is important not only for Ukraine but also for the whole world. It is the fact that the technologically to do exactly same granules is expensive. Therefore, manufacturers admit a range of 1-5mm diameter. More than 5 mm granules are fragile and the dose of mineral substances will be excessively large at its falling. Granules of less than 1 mm are greatly different in aerodynamic properties. Global manufacturers are constantly stay in search of promising solutions by centrifugal spreaders, because of the disc spreaders are most beneficial in terms of performance and quality indicators.

The program and methodology are developed and results of experimental research of the centrifugal working body for application of mineral fertilizers are obtained.

The rotary working body is proposed. The design features of this organ can improve the uniformity of dispersion of mineral fertilizers.

The original methods of determining the critical impact velocity of the metal surface with the moisture granules and influence the action of wind on the final distribution are developed. Techniques of airflow rate influence research to determine the effect, both in laminar and turbulent conditions that are not provided by known techniques.

The work will identify the optimal design parameters of centrifugal disc of fertilizer spreader.

Author Biography

Наталія Олександрівна Пономаренко, Dnipropetrovsk State Agrarian University of Economics, st. Voroshilov, 25, Dnipropetrovsk, 49000

Candidate of Technical Sciences

Department of operations tractor fleet

References

  1. Xisto, A. L. R. P., Boas, E. V. de B. V., Nunes, E. E., Federal, B. M. V. B., Guerreiro, M. C. (2012). Volatile profile and physical, chemical, and biochemical changes in fresh cut watermelon during storage. Food Science and Technology (Campinas), Vol. 32, № 1, 173–178. doi:10.1590/s0101-20612012005000020
  2. Erukainure, O. L., Oke, O. V., Daramola, A. O., Adenekan, S. O., Umanhonlen, E. E. (2010, August 1). Improvement of the Biochemical Properties of Watermelon Rinds Subjected to Saccharomyces cerevisae Solid Media Fermentation. Paskistan Journal of Nutrition, Vol. 9, № 8, 806–809. doi:10.3923/pjn.2010.806.809
  3. Dubenok, N. N., Shuliak, A. S. (2004). Zemleustroystvo s osnovami geodezii. M.: Kolos, 320.
  4. Kashtanov, A. N., Bulgakov, D. S., Golavanev, I. N., Molchanov, E. N., Rubtsov, S. A. (2006). Razvitie tehnologiy, metodov i sredstv tochnogo zemledeliia. M., 147.
  5. Shafran, S. A., Cherevikov, V. D., Pupynin, V. M. (2006). Agrohimicheskaia ieffektivnost' differentsirovannogo vneseniia mineral'nyh udobreniy s uchetom vnutripol'noy neodnorodnosti pochvennogo plodorodiia. Innovatsionno-tehnologicheskie osnovy razvitiia zemledeliia. Kursk, 414-416.
  6. Armand, D. L. (1975). Nauka o landshafte. Moskva: Mysl', 21-29.
  7. Kniazheva, E. V., Nadezhdin, S. M., Frid, A. S. (2006). Prostranstvennaia neodnorodnost' urovnia plodorodiia vyschelochennogo chernozema v predelah polia. Pochvovedenie, № 9, 1120-1129.
  8. Afanas'ev, R. A., Merzlaia, G. E., Ladonin, V. F., Marchenko, N. M. (27.09.2005). Sposob vneseniia organicheskih udobreniy. Patent RU 2260930. Available: http://www.freepatent.ru/patents/2260930
  9. Klenin, N. I., Levshin, A. V. (2008). Sel'skohoziaystvennye i meliorativnye mashiny. M.: Kolos, 816.
  10. Halanskiy, V. M. (2006). Sel'skohoziaystvennye mashiny. M.: Kolos, 412.

Published

2014-12-23

How to Cite

Пономаренко, Н. О. (2014). Research results of working body of fertilizing machine. Technology Audit and Production Reserves, 6(1(20), 45–49. https://doi.org/10.15587/2312-8372.2014.34170