Determination of effective field of application of active methods of vibrations and noise suppression in hydraulic and pneumatic drives

Authors

  • Павло Миколайович Андренко National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine, str. Frunze, 21, Ukraine https://orcid.org/0000-0002-6377-6020
  • Володимир Вікторович Клітной National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine, str. Frunze, 21, Ukraine https://orcid.org/0000-0003-0024-5959

DOI:

https://doi.org/10.15587/2312-8372.2015.36260

Keywords:

vibration, noise, hydraulic drive, pneumatic drive, active systems, vibration damping, noise reduction

Abstract

It is analyzed the causes of noise and vibration in the hydraulic and pneumatic drives. It is determined that the main sources of noise and vibrations in such systems are pneumatic or hydraulic sources of energy, the connecting lines. The motor can be identified as a source of mechanical vibration motor. Frequency spectra arising in hydro pneumatic systems are determined. It is shown that in a large number of cases, the fundamental components of noise and vibrations are low frequency. The known passive methods to reduce vibration and noise are considered. It is established that their use for suppressing of low-frequency spectrum is ineffective. A review of active methods of abatement of vibration and noise, performed well when working at low frequencies. Particular attention is paid to compensate for the active devices built on the principles of feedback systems and systems in the perturbation. It is considered the existing developments of active suppress devices of low-frequency noise and vibration in the hydraulic and pneumatic drives, which proved to be effective. It is shown the promising circuit design of such devices and possible areas of its application.

Author Biographies

Павло Миколайович Андренко, National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine, str. Frunze, 21

Doctor of Technical Sciences, Professor

Department of Hydro Pneumatic Automation and Hydraulic Drive

Володимир Вікторович Клітной, National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine, str. Frunze, 21

Ph.D., Associate Professor

Department of Details Machines and Applied Mechanics

References

  1. Andrenko, P. N., Lur'e, Z. Ya. (2013). Tendentsii razvitiia obiemnyh gidroprivodov. Promislova gіdravlіka і pnevmatika, № 3(41), 3-12.
  2. Fіnkel'shtein, Z. L., Andrenko, P. M., Dmitrіenko, O. V.; In: Andrenko, P. M. (2014). Ekspluatatsіia, obslugovuvannia ta nadіinіst' gіdravlіchnih mashin і gіdroprivodіv. Kh.: Vidavnichii tsentr NTU “KhPІ”, 318.
  3. Andrenko, P. M., Dmitrіenko, O. V., Svinarenko, M. S. (2012). Gasitelі pul'satsіi tisku obiemnih gіdroagregatіv. Kh.: Vid-vo “NTMT”, 160.
  4. Andrenko, P. M., Svinarenko, M. S., Riemietova, A. H. (2014). Parametrichnі doslіdzhennia gіdravlіchnogo gasitelia pul'satsіi tisku z avtomatichnim pіdstroiuvanniam parametrіv. Vіsnik NTU “KhPІ”. Serіia: Matematichne modeliuvannia v tehnіtsі і tehnologіi, № 6 (1049), 9-19.
  5. Andrenko, P. M., Dmitrіenko, O. V., Bogus, Yu. Yu. (2014). Viznachennia ratsіonal'nih konstruktivnih parametrіv pasivnih gasitelіv pul'satsіi tisku. Promislova gіdravlіka і pnevmatika, № 1(43), 83-89.
  6. Andrenko, P., Panamar'ova, O. (2012). Issledovanie volnovyh protsessov v gidroagregate pitaniia gidrosistem. MOTROL: Commission of motorization and energetics in agriculture: Polish Academy of sciences, Vol. 14, № 1, 3-9.
  7. Von Flotow, A. H., Schaefer, B. (1986, November). Wave-absorbing controllers for a flexible beam. Journal of Guidance, Control, and Dynamics, Vol. 9, № 6, 673–680. doi:10.2514/3.20163
  8. Baillargeon, B. P. (2005, June 1). Active Vibration Suppression of Sandwich Beams using Piezoelectric Shear Actuators: Experiments and Numerical Simulations. Journal of Intelligent Material Systems and Structures, Vol. 16, № 6, 517–530. doi:10.1177/1045389x05053154
  9. Ishihama, M., Iizuka, S. (2002). Vibration suppression of space-frame body structure by active dynamic damper and adaptive feed-forward control scheme. The Japan Society of Mechanical Engineers, Proceedings of International Conference on Motion and Vibration Control, Vol. 6, № 1, 82-87.
  10. Preumont, A., Seto, K. (2008). Active Control of Structures. John Wiley & Sons, Ltd, 296. doi:10.1002/9780470715703
  11. Pan, M., Johnston, N., Hillis, A. (2013, July 29). Active control of pressure pulsation in a switched inertance hydraulic system. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, Vol. 227, № 7, 610–620. doi:10.1177/0959651813490096
  12. Mal'tsev, A. A., Maslennikov, R. O., Khoriaev, A. V., Cherepennikov, V. V. (2005). Adaptivnye sistemy aktivnogo gasheniia shuma i vibratsii. Akusticheskii zhurnal, № 51, 242-258.
  13. Vasil'ev, A. V. (August 2004). Snizhenie nizkochastotnoi vibratsii truboprovodov energeticheskih ustanovok. Nauka – proizvodstvu, № 8, 68-70.
  14. Belogubtsev, E. S., Kiriuhin, A. V., Kuznetsov, G. N. et al. (2011). Problemy i predvaritel'nye rezul'taty ispytaniia sistem aktivnogo gasheniia nizkochastotnyh signalov v vodnoi i vozdushnoi srede. Fundamental'naia i prikladnaia gidrofizika, T. 4, № 3, 93-107.
  15. Noise attenuation in a hydraulic circuit. (15.02.2005). Patent US 6854269 В2, MPK F16D 031/02. Available: http://www.google.co.in/patents/US6854269

Published

2015-01-29

How to Cite

Андренко, П. М., & Клітной, В. В. (2015). Determination of effective field of application of active methods of vibrations and noise suppression in hydraulic and pneumatic drives. Technology Audit and Production Reserves, 1(1(21), 8–11. https://doi.org/10.15587/2312-8372.2015.36260