Implementation of dynamic compensators in the multi-loop control system

Authors

  • Олексій Юрійович Денисенко National Technical University of Ukraine «Kyiv Polytechnic Institute», 03056, Ukraine, Kyiv-56, 37, Prospect Peremohy, Ukraine https://orcid.org/0000-0001-7346-1615
  • Звенислава Ярославівна Козаневич National Technical University of Ukraine «Kyiv Polytechnic Institute», 03056, Ukraine, Kyiv-56, 37, Prospect Peremohy, Ukraine https://orcid.org/0000-0002-1138-7285

DOI:

https://doi.org/10.15587/2312-8372.2016.66778

Keywords:

dynamic compensators, multi-loop systems, automated system

Abstract

This article discussed how to implement dynamic compensators for multi-loop control systems that make up the process control system or computer-integrated systems. The main aim of the study is to validate the choice of a method of technical implementation of dynamic compensators. The characteristics of the considered methods for implementation of dynamic compensators are given. Suitability indicators of these methods are proposed for inclusion in the composition of automated process control systems and/or computer-integrated systems of multi-loop control systems that contain dynamic compensators in their structure. Comparison of the suitability of the methods for the technical implementation of dynamic compensators is considered using the proposed indicators. Specific method of technical implementation of dynamic compensators is chosen as a result of comparison of indicators. The proposed method makes it possible to unify the software elements of dynamic objects control systems. The research results can be applied by experts in the synthesis of elements of software and automated computer-integrated process control systems.

Author Biographies

Олексій Юрійович Денисенко, National Technical University of Ukraine «Kyiv Polytechnic Institute», 03056, Ukraine, Kyiv-56, 37, Prospect Peremohy

Department of automation of chemical plants

Звенислава Ярославівна Козаневич, National Technical University of Ukraine «Kyiv Polytechnic Institute», 03056, Ukraine, Kyiv-56, 37, Prospect Peremohy

Candidate of Technical Science, Associate Professor

Department of automation of chemical plants

References

  1. Glushkov, V. M., Amosov, N. M., Artemenko, I. A. et al.; In: Glushkov, V. M. (1974). Entsiklopediia kibernetiki. Vol. 1. Kyiv: USE, 608.
  2. Kazakov, A. V., Sofieva, Yu. N. et al.; In: Dudnikov, E. G. (1987). Avtomaticheskoe upravlenie v himicheskoi promyshlennosti. Moscow: Khimiia, 368.
  3. In: Trehub, V. H., Hlushchenko, M. S., Proskurka, Ye. S. (2013). Avtomatyzatsiia tekhnolohichnykh protsesiv ta vyrobnytstv. Kyiv: NUKhT, 44.
  4. Bunke, O. S. (2014). Avtomatyzatsiia protsesiv keruvannia inertsiinymy konturamy kotloahrehata teplovoi elektrostantsii z vykorystanniam metodu dynamichnoi korektsii. Kyiv, 168.
  5. Dorf, R. C., Bishop, R. H. (2001). Modern control systems. Ed. 9. NJ: Prentice-Hall, Upper Saddle River, 831.
  6. Nayak, O. B., Gole, A. M., Chapman, D. G., Davies, J. B. (1994). Dynamic performance of static and synchronous compensators at an HVDC inverter bus in a very weak AC system. IEEE Transactions on Power Systems, Vol. 9, № 3, 1350–1358. doi:10.1109/59.336131
  7. Jianwei, F., Qi, W., Wei, C., Duwei, Y. (2008, September). The design of compensators for telecontrol system based on network. 2008 IEEE Conference on Cybernetics and Intelligent Systems. Institute of Electrical & Electronics Engineers (IEEE), 104–107. doi:10.1109/iccis.2008.4694786
  8. Kowalak, R. (2016, March 5). Computer-aided analysis of resonance risk in power system with Static Var Compensators. PRZEGLĄD ELEKTROTECHNICZNY, Vol. 1, № 3, 22–27. doi:10.15199/48.2016.03.05
  9. Zhuchenko, A. I., Yaroshchuk, L. D. (2002). Spetsialni rozdily matematyky dlia doslidzhennia kompiuternykh system. K.: IVTs «Vydavnytstvo «Politekhnika», 208.
  10. Ostapenko, Yu. O. (1999). Identyfikatsiia ta modeliuvannia tekhnolohichnykh obiektiv keruvannia. Kyiv: NTUU «KPI», 424.
  11. Besekerskii, V. A., Popov, E. P. (1972). Teoriia sistem avtomaticheskogo regulirovaniia. Moscow: Nauka, Gl. red. fiz.-mat. lit., 768.
  12. Myshkis, A. D. (2007). Element teorii matematicheskih modelei. Ed. 3. Moscow: KomKniga, 192.
  13. Bessonov, L. A. (1978). Teoreticheskie osnovy elektrotehniki: Elektricheskie tsepi. Ed. 7. Moscow: Vysshaia shkola, 528.

Published

2016-03-29

How to Cite

Денисенко, О. Ю., & Козаневич, З. Я. (2016). Implementation of dynamic compensators in the multi-loop control system. Technology Audit and Production Reserves, 2(3(28), 23–28. https://doi.org/10.15587/2312-8372.2016.66778