COMPOSITION AND GENERATION OF MUNICIPAL SOLID WASTE (MSW) IN MALAYSIA: BALAKONG CITY CASE STUDY

Автор(и)

  • Mohd Armi Abu Samah
  • Dennis Victor
  • Badgie Dawda
  • Latifah Abd Manaf
  • Sharifah Norkhadijah Syed Ismail
  • Khairul Bariyah Abd Hamid
  • Kamaruzzaman Yunus
  • Mohd Khairul Amri Kamarudin

DOI:

https://doi.org/10.32461/2226-3209.3.2018.173619

Анотація

Abstract. Municipal Solid Waste (MSW) management is one of the most challenging issues faced by most developing countries. Knowledge of solid waste generation and composition is necessary for accurate decision-making in terms of engineering design, planning and forecasting for the management strategy of urban waste. The objective of this study was to determine MSW generation and composition in an urban area of Balakong City, Selangor, Malaysia. The application of a linear model on solid waste forecasting was also performed in this study. A survey of household residents in eight housing areas in Balakong was carried out for one month from January to February 2011. Data were collected on a daily basis. In total, organic waste was the highest composition (5,344 kg, 68.6%) among the solid waste generated in all eight housing areas. Plastic and paper comprised of 10.4% (811 kg) and 9.5% (736 kg) of the solid waste generated. The least composition was glass (270 kg, 3.5%) and metals (204 kg, 2.5%). Other type of disposables comprised of 5.5% (419 kg) of the total solid waste generated. A linear model on solid waste forecasting has determined slightly higher prediction on solid waste generation with a statistically significant difference was obtained at p < 0.05.
Key words: Municipal solid waste, composition, generation, linear model, Balakong city

Посилання

Laws of Malaysia. (2007). Solid Waste and Public Cleansing Management Act 2007. Commisioner of Law Revision: Malaysia.

Apaydin, O., & Gonullu, M. T. (2011). Route time estimation of solid waste collection vehicles based on population density. Global NEST Journal. 13(2), 162-169.

Tchobanoglous, G., Theisen, H., & Vigil, S. (1993). Integrated solid waste management-Engineering principles and management issues. McGraw-Hill: New York.

Chen, C. C. (2005). An evaluation of optimal application of government subsidies on recycling of recyclable waste. Polish Journal of Environmental Studies, 14(2), 137-144.

Saheri, S., Aghajani, M., Basri, N. E. A., Mahmod, N. Z. B., & Begum, R. A. (2011). Environmental assessment of municipal solid waste disposal options in Malaysia. Australian Journal of Basic and Applied Sciences, 5(11), 1069-1073.

Sanjay, S. J., Trehan, C., & Kaul S. (1998). Methane emission from MSW by gas chromatography. Journal of Pollution Research, 17(4), 367–369.

Chattopadhyay, S., Dutta, A., & Ray, S. (2007). Sustainable municipal solid waste. In International Conference on Civil Engineering in the New Millennium: Opportunities and Challenges, pp. 11-14

Martin, J. H., Collins, A. R., & Diener, R. G. (1995). A sampling protocol for composting, recycling, and re- use of municipal solid waste. Journal of the Air and Waste Management Association, 34, 864–870.

Blight, G. E., Fourie, A. B., Morris, J. W. F., & Rohrs, L. H. (2000). The effects of climate and waste composition on leachate and gas quality: An updated report of work in South Africa. Waste Management and Research, 18(4), 393-401.

Hassan, M. N., & Chong, T. L. (2000). Contemporary issues of MSWM in developing countries. In Seminar on Environmental Indicators (river quality and solid waste). Sarawak. Malaysia.

Zaini, S. (2011). Municipal solid waste management in Malaysia: Solution for sustainable waste management. Journal of Applied Sciences in Environmental Sanitation, 6(1), 29-38.

Department of Statistics (DoS). (2011). Population data in Balakong area Selangor, Malaysia. DoS: Putrajaya.

Saeed, M. O., Hassan, M. N., & Mujeebu, M. A. (2009). Assessment of municipal solid waste generation and recycleable materials potential in Kuala Lumpur. Waste Management. 29(7), 2209-2213.

Budhiarta, I., Siwar, C., & Basri, H. (2012). Current status of municipal solid waste generation in Malaysia. International Journal on Advanced Science Engineering Information Technology, 2(2), 2088-5334.

Toriman, M. E., Ata, F. M., Kamarudin, M. K. A., & Idris, M. (2013). Bed-load sediment profile and effect of river bank erosion on river cross-section. American Journal of Environmental Sciences, 9(4), 292-300.

Kamarudin, M. K. A., Idris, M., & Toriman, M. E. (2013). Analysis of Leptobarbus hoevenii in control environment at natural lakes. American Journal of Agricultural and Biological Sciences, 8, 142-148.

CPHEEO (Central Public Health and Environmental Engineering Organization). (2000).

Ismail, S. N. S., & Manaf, L. A. (2013). The challenge of future landfill: A case study of Malaysia. Journal of Toxicology and Environmental Health Sciences, 5(6), 86–96.

Government of Malaysia. (2006). Ninth Malaysia Plan (2006–2010). Economic Planning Unit: Putrajaya.

Institute for Global Environmental Strategies (IGES). (2001). Urban environmental challenge in Asia: Current situations and management strategies. Part1: The Summary of UE 1st Phase Project, Urban Environmental Management Project, Hayama, Japan. 1991-8178.

Wilson, D. C., Araba, A. O., Chinwah, K., & Cheeseman, C. R. (2008). Building recycling rates through the informal sector. Waste Management, 29(2), 629-635.

Ministry of Housing and Local Government (MHLG). (2000). Ministry of Housing and Local Government Reports 2000. Government Printers: Kuala Lumpur.

Ahmad, F. M. (2008). Recycling systems in Malaysia: Case studies on industrial waste. Institute for The Environment and Development (LESTARI), Universiti Kebangsaan Malaysia: Selangor.

Buenrostro, O. (2001). The generation of urban solid wastes in the Cuitzeo Lake Basin, Mexico. Report Final Version, Project No. 000323. CONACYT, Research Institute for Natural Resources, University of Michoacan San Nicolas de Hidalgo.

Gupta, S., Mohan, K., Prasad, R., Gupta, S., & Kansal, A. (1998). Solid waste management in India: Options and opportunities. Resources, Conservation and Recycling, 24(2), 137-154.

Adedibu, A. A. A. (1985). Comparative analysis of solid waste composition and generation in two cities of a developing nation. The Environmentalist, 5(2), 123-127.

Diallo, S., & Coulibaly, Y. (1991). Urban waste in the slums of Bamako. Man and Waste, Popular Recycling Activities in the Third World, 81(2), 69-88.

Buenrostro, O., & Bocco, G. (2003). Solid waste management in municipalities in Mexico: Goals and perspectives. Resources, Conservation and Recycling, 39(3), 251-263.

Plastindia. (2006). End-to-end solutions for integrated solid waste management.

Sivapalan, K., Muhd Noor, M. Y., Abd Halim, S., Kamaruzzaman, S., & Rakmi, A. R. (2002). Comprehensive characteristics of the municipal solid waste generation in Kuala Lumpur. In Regional Symposium on Environment and Natural Resources, pp. 359–368.

World Bank Report. (2012). http://siteresources.worldbank.org/EXTANNREP2012/Resources/87844081346247445238/AnnualReport2012

_En.pdf.

Seo, S., Aramaki, T., Hwang, Y., & Hanaki, K. (2004). Environmental impact on solid waste treatment methods in Korea. Journal of Environmental Engineering, 130(1), 81-89.

Kamarudin, N. A., Kamarudin, M. K. A., Umar, R., Hassan, A. R., Lananan, F., & Sunardi. (2018). Determination of filtration and purification system for flood water filter. International Journal of Engineering and Technology, 7(2.15), 8-12.

Grossmann, D., Hudson, J. F., & Marks, D. H. (1974). Waste generation models for solid waste collection. Journal of the Environmental Engineering Division, 100, 1219–1230.

Wahab, N. A., Kamarudin, M. K. A., Toriman, M. E., Juahir, H., Gasim, M. B., Rizman, Z. I., & Damayanti,

P. P. (2018). Climate changes impacts towards sedimentation rate at Terengganu River, Terengganu, Malaysia. Journal of Fundamental and Applied Sciences, 10(1S), 33-51.

Endut, A., Abdullah, S. H. Y. S., Hanapi, N. H. M., Hamid, S. H. A., Lananan, F., Kamarudin, M. K. A. & Khatoon, H. (2017). Optimization of biodiesel production by solid acid catalyst derived from coconut shell via response surface methodology. International Biodeterioration and Biodegradation, 124, 250-257.

##submission.downloads##

Номер

№ 3 (2018)

Розділ

Мистецтвознавство

Ліцензія

Автори, які публікуються у цьому журналі, погоджуються з наступними умовами:

1. Автори залишають за собою право на авторство своєї роботи та передають журналу право першої публікації цієї роботи на умовах ліцензії Creative Commons Attribution License, котра дозволяє іншим особам вільно розповсюджувати опубліковану роботу з обов'язковим посиланням на авторів оригінальної роботи та першу публікацію роботи у цьому журналі.

2. Автори мають право укладати самостійні додаткові угоди щодо неексклюзивного розповсюдження роботи у тому вигляді, в якому вона була опублікована цим журналом (наприклад, розміщувати роботу в електронному сховищі установи або публікувати у складі монографії), за умови збереження посилання на першу публікацію роботи у цьому журналі.

3.Політика журналу дозволяє і заохочує розміщення авторами в мережі Інтернет (наприклад, у сховищах установ або на особистих веб-сайтах) рукопису роботи, як до подання цього рукопису до редакції, так і під час його редакційного опрацювання, оскільки це сприяє виникненню продуктивної наукової дискусії та позитивно позначається на оперативності та динаміці цитування опублікованої роботи.