Research of the processes occurring at belt breakage of the inclined conveyor

Authors

  • Т.В. Александрова Кафедра «Горное оборудование» Криворожский технический университет, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2590

Abstract

In article is given the analytical substantiation of the occurring processes on the inclined conveyor at belt breakage of the inclined conveyor. There is considered the interaction of a stream of ore with a belt, and as change of size of pulling together effort and speed of a belt in process of it descent downwards, and as vibration of the torn off end of a belt at it movement on roller carriages of conveyor.

Author Biography

Т.В. Александрова, Кафедра «Горное оборудование» Криворожский технический университет

Аспирант

References

  1. Курников Ю.А., Новиков В.И., Кузовкин В.А. Аналитическое исследование поведения ленты уклонного конвейера после её обрыва. Механизация горных работ. Сб. 75. 1975 г. Стр.283.
  2. Проскурин В.И. К теоретическому анализу процесса обрыва ленты конвейера. Разработка месторождений полезных ископаемых. Вып. 20. 1970 г. Стр.53.
  3. Мещерский И.В. Работы по механике тел переменной массы. 2 изд. М. «Наука». 1947 г. Стр. 182.
  4. Космодемьянский А.А. Курс теоретической механики. 3 изд. Часть 2, М. «Просвещение», 1966, Стр.92.
  5. Болотин В.В. Динамическая устойчивость упругих систем. - М., 1956 г Стр.76-80, 458-463.
  6. Галкин В.И., Дмитриев В.Г., Дъяченко В.П., Зацепин И.В., Шешко Е.Е. Современная теория ленточных конвейеров горных предприятий. М. МГГУ. 2005 г. Стр. 50.
  7. Иванченко Ф.К. Конструкция и расчет подъемно-транспортных машин. К. 1983 г. Стр. 263.
  8. Лойцянский Л.Г., Лурье А.И. Курс теоретической механики. Том 2. Динамика. 1980 г. Стр.232.

Downloads

Published

2010-01-29

How to Cite

Александрова, Т. (2010). Research of the processes occurring at belt breakage of the inclined conveyor. Eastern-European Journal of Enterprise Technologies, 1(6(43), 15–22. https://doi.org/10.15587/1729-4061.2010.2590

Issue

Vol. 1 No. 6(43) (2010): The applied physics and materials technology

Section

Applied mechanics

License

Copyright (c) 2014 Т.В. Александрова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.