SOURCES OF METROLOGICAL RISKS AS FACTORS OF INFLUENCE ON THE TECHNOLOGICAL PROCESS
DOI:
https://doi.org/10.24025/2306-4412.1.2023.273708Keywords:
metrological risks identification, risk register, external factors of influence, internal factors of influence, metrological support of productionAbstract
The constant development of science and technology, the introduction of numerous innovations, and the complication of technological processes, especially in the part of metrological support, determine the importance of research and analysis of sources of metrological risks, which in a certain way affect the formation of product quality at the manufacturing stage. All this gives rise to many new metrological risks for production, which must be identified, classified, and their causes and consequences must be identified in time. The authors have identified and described the main sources of metrological risks as factors influencing on the technological process and have made their generalized classification, which allows to combine the influencing factors of different nature into certain groups and to facilitate the identification process during the assessment of metrological risks. It is proposed to divide them into sources of the external environment, on which the enterprise can’t influence, but only adapt to them, and sources of the internal environment, which can be influenced. The external environment includes socio-economic, scientific-innovative, and natural-ecological factors. The sources of the internal environment include technical, human, and metrological support system factors. Identification should include risks, regardless of their nature, complexity, and controllability. It is recommended to store information about identified risks obtained from various sources in a single information system, which is based on the risk register. It stores information about each risk's identified causes and consequences, and the data is structured according to the proposed classification, allowing it to be described and compared. Such a register allows for obtaining information related to the source of a specific risk and serves as a basis for its assessment and minimization.
References
М. Микийчук, Б. Стадник, С. Яцишин, та Я. Луцик, "Розумні вимірювальні засоби для кіберфізичних систем", Вимірювальна техніка та метрологія, т. 77, с. 3-16, 2016. [Електронний ресурс]. Режим доступу: https://doi.org/10.23939/istcmtm2016.77.003.
О. Васілевський, "Концепція метрологічного забезпечення в індустрії 4.0", ІТКІ, т. 48, № 2, с. 37-44, Верес. 2020. [Електронний ресурс]. Режим доступу: https://doi.org/10.31649/1999-9941-2020-48-2-37-44.
О-С. Корчинська, та Т. Гут, "Система управління метрологічними ризиками якості продукції на етапі виготовлення", Вимірювальна техніка та метрологія, т. 83, № 1, с. 29-34, 2022. [Електронний ресурс]. Режим доступу: https://doi.org/10.23939/istcmtm2022.01.029.
Risk management – Guidelines, ISO 31000:2018, 2018. [Online]. Available: https://www.iso.org/obp/ui/#iso:std:iso:31000:ed-2:v1:en.
Ю. Ковтуненко, А. Олексійчук, та Т. Васалатій, "Фактори зовнішнього середовища, які впливають на вибір стратегії виробничого підприємства", Інвестиції: практика та досвід, т. 11, с. 55-58, 2016. [Електронний ресурс]. Режим доступу: http://www.investplan.com.ua/pdf/11_2016/13.pdf.
F. R. Khan, "Socio-economic factors influencing entrepreneurship development: An empirical study across the small and medium enterprises of Chennai", International Journal of Students Research in Technology & Management, vol. 2, no. 3, pp. 89-94, State of Tamil Nadu, India, May, 2014.
M. K. Zonouzi, M. Hoseyni, and M. Khoramshahi, "Political factors affecting the survival of SMEs case study: An empirical study in Tehran Grand Bazaar", Asia Pacific Management Review, vol. 26, no. 1, pp. 47-56, 2021. [Online]. Available: https://doi.org/10.1016/j.apmrv.2020.07.002.
S. Aghmiuni, S. Siyal, Q. Wang, and Y. Duan, "Assessment of factors affecting innovation policy in biotechnology", Journal of Innovation and Knowledge, vol. 5, pp. 180-190, 2020. [Online]. Available: https://doi.org/10.1016/j.jik.2019.10.002.
Метрологія. Терміни та визначення, ДСТУ 2681:1994, Київ, Україна, 1 січ., 1995. [Online]. Available: https://dtp.lg.ua/Dokumentacija%20i%20oformlenie/DSTU_2681-94_metrologiya._terminy_i_opredeleniya.pdf.
Standard temperature and pressure (STP), NIST. [Online]. Available: https://en.wikipedia.org/wiki/Standard_temperature_and_pressure.
М. Микийчук, "Метрологічне забезпечення якості продукції на стадії виготовлення", дис. д-ра техн. наук, Національний університет "Львівська політехніка", Львів, 2012, с. 292.
М. Микийчук, П. Столярчук, та Т. Бубела, "Основні завдання та ознаки метрологічного забезпечення якості продукції", Вимірювальна техніка та метрологія, т. 74, 2013.
S. Artemuk, V. Brydinskyi, I. Mykytyn, and Y. Khoma, "Application of deep neural networks for EEG signal processing in braincontrolled wheeled robotic platform", in 2021 11th IEEE Int. Conf. on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), 2021, pp. 81-85. doi: 10.1109/IDAACS53288.2021.9660965.
С. Лейко, "Поняття компетенція та компетентність: теоретичний аналіз", Педагогічний процес: теорія і практика, т. 4, с. 128-135, 2013.
H. Baayen, S. Vasishth, R. Kliegl, and D. Bates, "The cave of shadows: Addressing the human factor with generalized additive mixed models", Journal of Memory and Language, vol. 94, pp. 206–234, 2017.
N. Anuar, and J. Kim, "A direct methodology to establish design requirements for human–system interface (HSI) of automatic systems in nuclear power plants", Annals of Nuclear Energy, vol. 63, pp. 326-338, 2014.
Yong Bai, Wei-Liang Jin, Marine Structural Design, 2nd ed., Butterworth-Heinemann, p. 977, 2015. [Online]. Available: https://doi.org/10.1016/C2013-0-13664-1.
T. Tambovceva, "Classification of factors influencing environmental management of enterprise", Technological and Economic Development of Economy, vol. 22, no. 6, pp. 867-884, 2016. doi: 10.3846/20294913.2016.116000.
Downloads
Published
How to Cite
Issue
Section
URN
License
Copyright (c) 2023 Ольга-Соломія Корчинська, М. М. Микийчук
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The authors who publish in this journal agree to the following terms:The authors reserve the right to authorship of their work and give the journal the right to first publish this work under the terms of the Creative Commons Attribution License CC BY-NC, which allows other persons to freely distribute published work with a mandatory reference to authors of the original work and the first publication of the work in this journal.
Authors have the right to conclude separate additional agreements for the non-exclusive distribution of the paper in the form in which it was published by this journal (for example, posting work in electronic repository or publishing as part of a monograph), provided that the link to the first publication in this journal is maintained.
The journal policy allows and encourages authors to post on the Internet (for example, in repositories of institutions or on personal websites) the manuscript of work, both before the submission of this manuscript to the editorial staff, and during its editorial work, as it contributes to the emergence of productive scientific discussion and positively affects the efficiency and dynamics of published work citation (see The Effect of Open Access).
