RANKING OF FACTORS INFLUENCING THE QUALITY OF IMPLEMENTATION OF POST-PRINTING PROCESSES
DOI:
https://doi.org/10.24025/2306-4412.2.2023.278908Keywords:
printing industry, book, bookbinding processes, hierarchy, rank, priorityAbstract
This article examines the main factors influencing the quality of implementation of post-printing processing of book editions, and, therefore, the quality of the final product – the book. In particular, the formed set of factors containing the following components: production of brochures, binding, assembly, covering material, processing of book blocks, decoration, final processing, project, is analyzed. In order to single out the selected factors, the method of expert evaluation is used and practitioners-experts and representatives of the scientific community are involved. The main attention is paid to the establishment and analysis of relationships between factors, which are conditionally divided into two categories: direct and indirect influences and direct and indirect dependencies. At the same time, direct influences and dependencies are understood as the reachabilities of the first order, and indirect ones are understood as the reachabilities of the second order. To study the relationships between the factors, the ranking method is used, according to which a system of hierarchical trees is constructed: hierarchical graphs of direct and indirect influences on the quality of implementation of post-printing processing of book editions; hierarchical graphs of direct and indirect dependencies of factors for the implementation of post-printing processes. For mathematical assessment, each type of relationships is assigned a corresponding weight coefficient. Taking into account the number of relationships of a certain type for each factor and their weight coefficients, the integral weight values of the factors are determined. The result of the assessment is the establishment of factor ranks. At the same time, the highest rank is assigned to the factor with the largest final weight value. Accordingly, the higher the rank is, the more priority the influence of the analyzed factor has. For example, the factor of the eighth rank (which is the highest in this problem) is assigned the first priority level, that is, its influence on the quality of the studied technological process is decisive. Similarly, ranks and priority levels are assigned to all elements of the selected set.
References
В. М. Сеньківський, та О. І. Осінчук, "Класифікація факторів додрукарських процесів", Наукові записки [Української академії друкарства], № 1 (54), с. 60-67, Львів, 2017.
Handbook on Printing Technology (Offset, Flexo, Gravure, Screen, Digital, 3D Printing with Book Binding and CTP). 4th Revised Ed. ASIA PACIFIC BUSINESS PRESS Inc, 2019.
В. З. Маїк, Технологія брошурувально-палітурних процесів. Львів: Укр. акад. друкарства, 2011.
E. K. Opoku, A. K. Badu, and K. K. Edonu, "Effectiveness of total quality management on organisational performance: Case study of printing press in Kumasi, Ashanti Region, Ghana", International Journal of Innovative Research and Development, vol. 10 (10), 2021.
W. T. Sun, and Y. J. Lin, "Systematic review and discussion on final artwork of prepress design", in Proc. 3rd Eurasian Conf. on Educational Innovation 2020 (ECEI 2020) Education and Awareness of Sustainability, 2020, pp. 777-780.
G. Sheth, Subjective Image Quality Assessment of Digitally Printed Images. Rochester Institute of Technology, 2019.
S. T. Jokhanan Kristiyono, KOMUNIKASI GRAFIS: Dilengkapi Panduan Teknis Desain Layout dengan Aplikasi Software Grafis InDesign. Prenada Media, 2020.
A. F. Sofyan, and T. Hidayat, Komputer Grafis: Image Editing, Graphic Design, dan Page Layout: Contoh Kasus dengan Adobe Photoshop, Adobe Illustrator, dan Adobe InDesign. Penerbit Andi, 2020.
V. Senkivskyy, I. Pikh, N. Senkivska, I. Hileta, O. Lytovchenko, and Y. Petyak, "Forecasting assessment of printing process quality", in Lecture Notes in Computational Intelligence and Decision Making: 2020 Int. Sci. Conf. Intellectual Systems of Decisionmaking and Problems of Computational Intelligence. Cham: Springer Int. Publishing, 2020, pp. 467-479.
L. Adascalița, and I. Colesnic, "Comparative aspects regarding the technical characteristics and the quality characteristics of the prints specific offset and digital printing methods", Annals of the Academy of Romanian Scientists, Series on Engineering Sciences, vol. 12, no. 1, pp. 60-72, 2020.
G. V. Folea, E. Bălan, and C. Mohora, "Considerations on quality assurance for flexographic print products", Annals of the Academy of Romanian Scientists, Series on Engineering Sciences, vol. 12, no. 1, pp. 33-47, 2020.
А. В. Кудряшова, "Модель пріоритетного впливу факторів на якість післядрукарських процесів", Вимірювальна та обчислювальна техніка в технологічних процесах: міжнар. наук.-техн. журн. Хмельницьк. нац. ун-ту, № 1, с. 187-192, 2023.
D. Pamucar, and F. Ecer, "Prioritizing the weights of the evaluation criteria under fuzziness: The fuzzy full consistency method–FUCOM-F", Facta Universitatis, Series: Mechanical Engineering, vol. 18 (3), pp. 419-437, 2020.
A. O. Kinay, and B. T. Tezel, "Modification of the fuzzy analytic hierarchy process via different ranking methods", International Journal of Intelligent Systems, vol. 37 (1), pp. 336-364, 2022.
І. В. Піх, Б. В. Дурняк, В. М. Сеньківський, та Т. С. Голубник, Інформаційні технології формування якості книжкових видань: монографія. Львів: УАД, 2017.
Downloads
Published
How to Cite
Issue
Section
URN
License
Copyright (c) 2023 Alona Kudriashova
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The authors who publish in this journal agree to the following terms:The authors reserve the right to authorship of their work and give the journal the right to first publish this work under the terms of the Creative Commons Attribution License CC BY-NC, which allows other persons to freely distribute published work with a mandatory reference to authors of the original work and the first publication of the work in this journal.
Authors have the right to conclude separate additional agreements for the non-exclusive distribution of the paper in the form in which it was published by this journal (for example, posting work in electronic repository or publishing as part of a monograph), provided that the link to the first publication in this journal is maintained.
The journal policy allows and encourages authors to post on the Internet (for example, in repositories of institutions or on personal websites) the manuscript of work, both before the submission of this manuscript to the editorial staff, and during its editorial work, as it contributes to the emergence of productive scientific discussion and positively affects the efficiency and dynamics of published work citation (see The Effect of Open Access).
