GRAPH ANALYTICAL METHOD FOR DETERMINING THE COMPLEX QUALITY INDICATOR OF QUALIMETRY OBJECTS
DOI:
https://doi.org/10.30837/ITSSI.2020.14.169Keywords:
qualimetry object, quality indicator, mathematical dependencies, rectangle method, trapezoid methodAbstract
The subject of research in the article is a method for determining a complex quality indicator of qualimetry objects that have quality indicators with different units of measurement. The purpose of the work is proposing a method for determining a complex quality indicator of multicriteria objects of qualimetry, using integration methods. The article solves the following task: to investigate the possibility of assessing the quality of qualimetry objects by graph analytical method, ie to apply the principle of determining the area and volume under curved surfaces both on the plane and in space, created by combining estimates of unit quality indicators on dimensionless scale. The following methods are used: mathematical statistics; qualimetry. The following results were obtained: the analysis of scientific literature on quality assessment of qualimetry objects in terms of existing mathematical relationships between the measured quality indicators and their assessment on a dimensionless scale was carried out. It was shown that, as a rule, mathematical dependences are nonlinear and their research is reduced to the development of universal methods that could be applied to objects of qualimetry, regardless of their nature, complexity, importance, etc. Research that involves nonlinear relationships between measured quality scores and their estimates on a dimensionless scale should be based on quality ideology and have a physical explanation. Having single quality indicators in a single (dimensionless) rating scale, it is proposed to determine a single comprehensive quality indicator of the object of qualimetry using integration methods. It is proposed to find the area under the broken curve, which is built as a result of combining estimates of quality indicators on a dimensionless scale over a period of observations. Since the calculation of definite integrals by the Newton-Leibniz formula is not always possible, to solve practical problems, it is enough to know the approximate value of a certain integral with a given degree of accuracy, so it is proposed to use methods of numerical integration, methods: rectangles and trapezoids. A method for determining a generalized indicator of the quality of the object of qualimetry, which can be considered universal, as it can be used for multi-criteria assessment of the quality of objects of qualimetry of different nature. Conclusions: To determine the complex quality indicator of multicriteria qualimetry objects, it is proposed to apply integration by the method of average rectangles. The method of definition of a complex indicator of quality of object of qualimetry with application of integration which considers receipt of estimations of unit indicators of quality is proposed.
References
Aleksandrov, P. S. (1968), Analytical Geometry Lectures [Lektsii po analiticheskoy geometrii], Nauka, Moscow, 912 p.
Harrington, E. C. Jr. (1965), "The desirability Function", Industr. Quality Control, April, P. 2–9.
Azgal'dov, G. G., Rajhman, Je. P. (1972), About kvalimetriia [O kvalimetrii], Izdatel'stvo standartov, Moscow, 172 p.
Trishch, R. M., Slityuk, E. A. (2006), "Generalized point and interval evaluation items ICE workmanship" ["Obobshchonnaya tochechnaya i interval'naya otsenki kachestva izgotovleniya detali DVS"], Eastern-European Journal of Enterprise Technologies, No. 1/2 (19), P. 63–67.
Trishch, R. M., Slityuk, E. A. (2006), "Spot and interval evaluation of product quality" ["Tochechnaja i interval'naja ocenki kachestva izdelij"], Bulletin of the NTU "KhPI". Collection of scientific works, No. 27, P. 96–102.
Ginevičius, R., Trishch, H. Petraškevičius, V. (2015), "Quantitative assessment of quality management systems’ processes", Economic Research-Ekonomska Istraživanja, No. 28:1, P. 1096–1110. DOI: https://doi.org/10.1080/1331677X.2015.1087676
Trishch, R., Maletska, O., Cherniak, O., Semionova, Ju., Jancis, V. (2020), "Analysis of the requirements of international and national standards for measure-ment methods and metrological equipment", Innovative Technologies and Scientific Solutions for Industries, No. 1 (11), P. 156–162. DOI: https://doi.org/10.30837/2522-9818.2020.11.156
Cherniak, O., Trishch, R., Kim, N., Ratajczak, S. (2020), "Quantitative assessment of working conditions in the workplace", Engineering Management in Production and Services, No. 12 (2), P. 99–106. DOI: https://doi.org/10.2478/emj-2020-0014
Trisch, R., Gorbenko, E., Dotsenko, N., Kim, N., Kiporenko, A. (2016), "Development of qualimetric approaches to the processes of quality management system at enterprises ac-cording to international standards of the ISO 9000 series", Eastern-European Journal of Enterprise Technologies, No. 4/3 (82), P. 18–24. DOI: https://doi.org/10.15587/1729-4061.2016.75503.
Ginevičius, R., Podvezko, V. (2007), "Complex assessment of sustainable development of state regions with emphasis on ecological and dwelling conditions", Ekologija, No. 53, P. 41–48.
Ginevičius, R., Podvezko, V. (2008), "A feasibility study of multicriteria methods application to quantitative evaluation of social phenomena", Business: Theory and Practice, No. 9, P. 81–87. DOI: https://doi.org/10.3846/1648-0627.2008.9.81-87
Ginevičius, R., Podviezko, A. (2013), "The evaluation of financial stability and soundness of Lithuanian Banks", Ekonomska istraživanja: znanstveno stručni časopis, No. 26, P. 191–208.
Ginevičius, R., Suhajda, K., Šimkūnaitė, J. (2014), "Lithuanian experience of quantitative evaluation of socioeconomic system position by multicriteria methods", Procedia – Social and Behavioral Sciences, No. 110, P. 952–960. DOI: https://doi.org/10.1016/j.sbspro.2013.12.941
Šimelytė, A., Antanavičienė, J. (2013), "The effect of investment promotion on FDI flows: A case of the Baltic States", Business: Theory and Practice, No. 14, P. 200–208. DOI: https://doi.org/10.3846/btp.2013.21
Beinoraitė, Š., Drejeris, R. (2014), "Population entrepreneurship measurement model", Business: Theory and Practice, No. 15, P. 199–209. DOI: https://doi.org/10.3846/btp.2014.20
Krivka, A. (2014), "Complex evaluation of the economic crisis impact on Lithuanian industries", Journal of Business Economics and Management, No. 15, P. 299–315. DOI: https://doi.org/10.3846/16111699.2013.867277
Brauers, W., Ginevičius, R., Podviezko, A. (2014), "Development of a methodology of evaluation of financial stability of commercial banks", Panoeconomicus, No. 61, P. 349–367. DOI: https://doi.org/10.2298/PAN1403349B
Hashemkhani Zolfanir, S., Maknoon, E., Zavadskas, K. (2015), "Multiple Nash equilibriums and evaluation of strategies. New application of MCDM methods", Journal of Business Economics and Management, No. 16, P. 290–305. DOI: https://doi.org/10.3846/16111699.2014.967715
"Method of rectangles" ["Metod prjamougol'nikov"], available at: http://mathprofi.ru/metod_prjamougolnikov.html (last accessed 28.11.2020).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Olena Cherniak, Nataliia Sorocolat, Iryna Kanytska
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Our journal abides by the Creative Commons copyright rights and permissions for open access journals.
Authors who publish with this journal agree to the following terms:
Authors hold the copyright without restrictions and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-commercial and non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their published work online (e.g., in institutional repositories or on their website) as it can lead to productive exchanges, as well as earlier and greater citation of published work.
