Parametric classification of pistons of internal combustion engines parts according to the "hole axis shift relative to the piston axis" criterion
DOI:
https://doi.org/10.15587/2313-8416.2017.101975Keywords:
поршень, система поддержки принятия решений, классификационное правилоAbstract
As a result of the research, a classification rule has been established that allows to determine whether the piston belongs to the class of good, or to the class of rejection by the criterion "hole axis shift relative to the piston axis". The resulting classification rule has the form of a linear discriminant function and can be applied in decision support systems when choosing design solutions within the framework of a computer-integrated technology for cast piston design
References
Samorodov, V. B., Bondarenko, A. I. (2012). Basic parameters of hydrostatic-mechanical transmissions, workings on chart “differential on exit”. Eastern-European Journal of Enterprise Technologies, 3 (7 (57)), 4–12. Available at: http://journals.uran.ua/eejet/article/view/4049
Samorodov, V. B., Bondarenko, A. I. (2012). Basic parameters of hydrostatic-mechanical transmissions that work on the scheme "differential at the input". Eastern-European Journal of Enterprise Technologies, 2 (7 (56)), 21–24. Available at: http://journals.uran.ua/eejet/article/view/3753
Samorodov, V. B., Bondarenko, A. I. (2014). Results of experimental research of process of braking the wheeled tractor «Fendt 936 Vario». Technology audit and production reserves, 3 (2 (17)), 54–59. Available at: http://journals.uran.ua/tarp/article/view/26215
Samorodov, V. B., Bondarenko, A. I. (2013). Results of modeling of process of acceleration of tractoranalogue «Belarus 3022 DV» with hydrovolumetricmechanical transmission. Technology audit and production reserves, 2 (1 (10)), 11–15. Available at: http://journals.uran.ua/tarp/article/view/12950
Akimov, O. V. (2003). Analiz pogreshnostej formoobrazovaniya otlivok koles turbin turbokompressorov dlya nadduva DVS na ehtape izgotovleniya ih voskovyh modelej. Eastern-European Journal of Enterprise Technologies, 3 (3), 16–24. Available at: http://nbuv.gov.ua/UJRN/Vejpte_2003_3_4
Akimov, O. V., Koval, O. S., Pulyaev, A. A., Dymko, E. P., Egorenko, T. A., Vysockij, S. V. (2015). Quality improvement of cast parts of ice: accounting technological aspects of the automated foundry. Eastern-European Journal of Enterprise Technologies, 6 (1 (78)), 56–62. doi: 10.15587/1729-4061.2015.56039
Sapegina, E. N. (2012). Use of computer-integrated technologies of designing in foundry. Technology audit and production reserves, 5 (2 (7)), 61–62. Available at: http://journals.uran.ua/tarp/article/view/4850
Nasyrova, V. A. (2013). Identification of reserves of improving the quality of body castings based on the computer-integrated simulation of equipment. Technology audit and production reserves, 6 (2 (14)), 41–43. Available at: http://journals.uran.ua/tarp/article/view/19531
Demin, D. A. (2014). Mathematical description typification in the problems of synthesis of optimal controller of foundry technological parameters. Eastern-European Journal of Enterprise Technologies, 1 (4 (67)), 43–56. doi: 10.15587/1729-4061.2014.21203
Demin, D. A. (2013). Adaptive modeling in problems of optimal control search termovremennoy cast iron. Eastern-European Journal of Enterprise Technologies, 6 (4 (66)), 31–37. Available at: http://journals.uran.ua/eejet/article/view/19453/17110
Fraze-Frazenko, O. (2012). Algorithm of study neural network for image recognition. Technology audit and production reserves, 4 (1 (6)), 33–34. Available at: http://dspace.oneu.edu.ua/jspui/handle/123456789/259
Unglert, K., Radic, V., Jellinek, A. M. (2016). Principal component analysis vs. self-organizing maps combined with hierarchical clustering for pattern recognition in volcano seismic spectra. Journal of Volcanology and Geothermal Research, 320, 58–74. doi: 10.1016/j.jvolgeores.2016.04.014
Demin, D. A. (2010). Prinyatie reshenij v processe upravleniya ehlektroplavkoj s uchetom faktorov nestabil'nosti tekhnologicheskogo processa. Vestnik NTU "HPI", 17, 67–72.
Demin, D. A., Bozhko, A. B., Zrajchenko, A. V., Nekrasov, A. G. (2006). Identifikaciya chuguna dlya opredeleniya racional'nyh rezhimov legirovaniya. Eastern-European Journal of Enterprise Technologies, 4 (1 (22)), 29–32.
Vasenko, Yu. A. (2012). Sovershenstvovanie tekhnologii polucheniya iznosostojkogo chuguna. Tekhnologicheskij audit i rezervy proizvodstva, 1 (3), 17–21. Available at: http://journals.uran.ua/tarp/article/viewFile/4870/4521
Ponomarenko, O. I., Trenyov, N. S. (2013). Computer modeling of crystallization processes as a reserve of improving the quality of pistons of ICE. Technology audit and production reserves, 6 (2 (14)), 36–40. Available at: http://journals.uran.ua/tarp/article/viewFile/19529/17205
Mourad, A. (2016). Localization of vectors–patterns in the problems of parametric classification with the purpose of increasing its accuracy. Eastern-European Journal of Enterprise Technologies, 4 (4 (82)), 10–20. doi: 10.15587/1729-4061.2016.76171
Downloads
Published
Issue
Section
License
Copyright (c) 2017 Pavel Penzev, Anton Pulyaev, Myhailo Gulaga, Vladyslav Vlasiuk
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
