Method of forecasting mechanical properties of cast-iron rolls

Authors

  • Volodymyr Volchuk State Higher Education Establishment “Pridniprovsk State Academy of Civil Engineering and Architecture” Chernishevskogo str., 24-а, Dnipro, Ukraine, 49005, Ukraine https://orcid.org/0000-0001-7199-192X
  • Stanislav Tokosov State Higher Education Establishment “Pridniprovsk State Academy of Civil Engineering and Architecture” Chernishevskogo str., 24-а, Dnipro, Ukraine, 49005, Ukraine

DOI:

https://doi.org/10.15587/2313-8416.2018.150342

Keywords:

multi-parametric technology, cast-iron rolls, mechanical properties, chemical composition, compromise area

Abstract

The working area of the multi-parametric technology for the production of section cast-iron rolls has been determined. A mathematical model for predicting the mechanical properties of the rolls depending on their chemical composition has been built. Based on the analysis of the obtained model, the compromise area of the mechanical properties of the rolls has been calculated. The compromise area allows the user to predict the complex of mechanical properties of the rolls within the regulatory documents. Forecast properties are tailored to customer requirements

Author Biographies

Volodymyr Volchuk, State Higher Education Establishment “Pridniprovsk State Academy of Civil Engineering and Architecture” Chernishevskogo str., 24-а, Dnipro, Ukraine, 49005

Doctor of Technical Sciences, Professor

Department of Materials Science and Materials Processing

Stanislav Tokosov, State Higher Education Establishment “Pridniprovsk State Academy of Civil Engineering and Architecture” Chernishevskogo str., 24-а, Dnipro, Ukraine, 49005

Department of Materials and Materials Processing

References

Krivosheev, A. E. (1957). Litye valki. Moscow: Metallurgizdat, 360.

Skoblo, T. S., Vorontsov, N. M., Budag'yants, N. A. et. al. (1994). Prokatnye valki iz vysokouglerodistykh staley. Moscow: Metallurgiya, 336.

Dubrov, Yu., Bol'shakov, V., Volchuk, V. (2015). Puti identifikatsii periodicheskikh mnogokriterial'nykh tekhnologiy. Saarbryukken: Palmarium Academic Publishing, 236.

Bol'shakov, V. I., Volchuk, V. N., Dubrov, Yu. I. (2013). Identifikatsiya mnogoparametricheskikh, mnogokriterial'nykh tekhnologiy i puti ikh prakticheskoy realizatsii. Metaloznavstvo ta termіchna obrobka metalіv, 4, 5–11.

Bolshakov, V. I., Volchuk, V. M., Dubrov, Yu. I. (2013). Etapy identyfikatsii bahatoparametrychnykh tekhnolohii ta shliakhy yikh realizatsii. Visnyk NAN Ukrainy, 8, 66–72. Available at: http://dspace.nbuv.gov.ua/handle/123456789/67873

Vdovin, K. N., Gimaletdinov, R. Kh., Kolokol'tsev, V. M., Tsybrov, S. V. (2005). Prokatnye valki. Magnitogorsk: MGTU, 543.

Borovik, L. I. (1968). Ekspluatatsiya valkov stanov kholodnoy prokatki. Moscow: Metallurgiya, 233.

Vafin, R. K., Pokrovskiy, A. M., Leshkovtsev, V. G.; Naraykin, O. S. (Ed.) (2004). Prochnost' termoobrabatyvaemykh prokatnykh valkov. Magnitogorsk: MGTU, 264.

Budag'yants, N. A., Karskiy, V. E. (1983). Litye prokatnye valki. Moscow: Metallurgiya, 175.

Lyubchenko, A. P. (1982). Vysokoprochnye chuguny. Moscow: Metallurgiya, 120.

Merlo, O. E. (1966). Kachestvo chugunnykh prokatnykh valkov. Moscow: Metallurgiya, 247.

Skoblo, T. S., Sidashenko, A. I., Saychuk, A. V., Rybalko, I. N., Telyatnikov, V. V., Radchenko, A. A. (2015). Primenenie nerazrushayushhego kontrolya dlya otsenki kachestva otlivok iz serogo chuguna. Agrotekhnika i energoobespechenie, 4, 15–25.

Bol'shakov, V. I., Dubrov, Yu. I. (2004). Reshenie mnogokriterial'noy zadachi metallovedeniya s kachestvenno neodnorodnymi kriteriyami. Dopovіdі NAN Ukraini, 11, 95–102.

Bol'shakov, V. I., Dubrov, Yu. I., Tkachenko, A. N., Tkachenko, V. A. (2006). Puti resheniya zadach identifikatsii kachestvennykh kharakteristik materialov na osnove ekspertnykh system. Dopovіdі NAN Ukraini, 9, 100–103.

Volchuk, V., Klymenko, I., Kroviakov, S., Oreskovic, M. (2018). Method of material quality estimation with usage of multifractal formalism. Tehnički Glasnik, 12 (2), 93–97. doi: http://doi.org/10.31803/tg-20180302115027

Bol’shakov, V. I., Dubrov, Y. I. (2017). The ways of anthropomorphic systems identification. Visnik NAN Ukraini, 10, 62–66. doi: http://doi.org/10.15407/visn2017.10.062

Volchuk, V. N. (2015). K opredeleniyu oblasti kompromissa kharakteristik kachestva materialov. Metaloznavstvo ta termіchna obrobka metalіv, 3, 5–11.

Bol'shakov, V. I., Fortygin, A. A. (2016). Sposob opredeleniya oblasti kompromissa kriteriev kachestva mnogokriterial'nykh tekhnologiy. Metaloznavstvo ta termіchna obrobka metalіv, 2, 40–46.

Volchuk, V. N. (2014). Issledovaniya vliyaniya khimicheskogo sostava chugunnykh prokatnykh valkov na ikh mekhanicheskie svoystva. Vіsnik Pridnіprovs'koi derzhavnoi akademіi budіvnitstva ta arkhіtekturi, 5, 12–18. URL: http://visnyk.pgasa.dp.ua/article/view/40698

Skoblo, T. S., Sydashenko, A. Y., Aleksandrova, N. M. et. al.; Skoblo, T. S. (2013). Proyzvodstvo y prymenenye prokatnikh valkov. Kharkiv: TsD No. 1, 572.

Downloads

Published

2018-12-10

Issue

No. 11 (2018)

Section

Technical Sciences

License

Copyright (c) 2018 Volodymyr Volchuk, Stanislav Tokosov

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.

Authors, who are published in this journal, agree to the following conditions:

1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.

 2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.