To the question of research of metal removal process in vibration treatment
DOI:
https://doi.org/10.15587/2313-8416.2014.32108Keywords:
metal removal, exponential dependence, approximation, vibration treatment, shape of the abrasive granulesAbstract
It is shown the results of experimental and theoretical researches, which allowed to obtain the exponential dependence, the use of which is possible in engineering practice when determining the metal removal rate per unit time at detail treatment in granules of different geometric shapes. It is established that the highest metal removal was observed at treatment of samples in the pyramidal granules on the base of a convex hexagon.
References
Ventskevich, J. (1986). Vliianie nekotoryh parametrov abrazivnogo napolnitelia na effektivnost' protsessa shlifovaniia v vibriruiushchih rezervuarah. Odessa, 175.
Babichev, A. P. (1994). Osnovy vibratsionnoi tehnologii: Chast' 2. Tehnologiia vibratsionnoi obrabotki. Rostov-na-Donu: DGTU, 89.
Mamalis, A. G., Mitsyk, A. V., Grabchenko, A. I., Fedorovich, V. A. (2013). Mathematical simulation of motion of working medium at finishing–grinding treatment in the oscillating reservoir. The International Journal of Advanced Manufacturing Technology, 70 (1-4), 1–14. doi: 10.1007/s00170-013-5257-6
Branspiz, E. V. (2002). Povyshenie effektivnosti vibroabrazivnoi obrabotki putem ratsional'nogo vybora ee osnovnyh parametrov. Kharkiv, 265.
Shumakova, T. A. (2010). Povyshenie proizvoditelnosti obrabotki detaley v vibriruyushchikh konteynerakh putem vybora formy instrumenta. Kharkiv, 244.
Popov, S. P. (1994). Intensifikatsiia protsessa vibroabrazivnoi obrabotki za schet uglov kolebanii i podzhatiia rabochei sredy. Voronezh: VGTU, 16.
Downloads
Published
Issue
Section
License
Copyright (c) 2014 Татьяна Александровна Шумакова
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
