By the definition of the limit state in the three-layer cylinder with viscous filling

Authors

  • Газаля Сабир кызы Хейрабади Azerbaijan State Oil Academy St. Kadyrli, 75, Baku, Azeyrbadzhan, AZ106, Azerbaijan

DOI:

https://doi.org/10.15587/2313-8416.2015.37060

Keywords:

anticorrosive coating, displacement, deformation, stress, pressure, layer, condition of destruction

Abstract

In the article it is determined strained and deformed state of the three-layer cylinder, the inner layer of which is steel, the middle layer is visco elastic and anticorrosive and the outer layer, which is the protective layer of polymeric material. The values of the internal and external pressures, leading to the destruction of the layers, are determined

Author Biography

Газаля Сабир кызы Хейрабади, Azerbaijan State Oil Academy St. Kadyrli, 75, Baku, Azeyrbadzhan, AZ106

Assistant

Department "Applied Mechanics"

References

Sanzharovskij, V. T. (1970). Fiziko-mehanicheskie svojstva polimernyh lakokrasochnyh pokrytij. Moskow: Izdatel'stvo «Himija», 370.

Sedov, L. I. (1970). Mehanika slozhnoj sredy. Vol. 1. Moskow: Izdatel'stvo,. – 492 s.

Rabotnov, Ju. N. (1966). Polzuchesti jelementov konstrukcij. Moskow: «Nauka», 780.

Moskvitin, V. V. (1972). Soprotivlenie vjazko-uprugih materialov. Moskow: Izdatel'stvo «Himija», 370.

Amenzade, Ju. A. (1976). Teorija uprugosti. Moskow: Izdatel'stvo «Vysshaja shkola», 287.

Bugakov, I. I. (1973). Polzuchest' polimernyh materialov. Moskow: Izdatel'stvo “Nauka”, 287.

Downloads

Published

2015-02-25

Issue

Vol. 2 No. 2(7) (2015)

Section

Technical Sciences

License

Copyright (c) 2015 Газаля Сабир кызы Хейрабади

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.

Authors, who are published in this journal, agree to the following conditions:

1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.

 2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.