The evaluation of technical state of composite constructions with the use of informational data processing

Authors

  • Юлия Алексеевна Казимиренко National University of Shipbuilding 9 Heroi Stalingrada ave., Mykolaiv, Ukraine, 54025, Ukraine

DOI:

https://doi.org/10.15587/2313-8416.2015.48052

Keywords:

technical state, composite constructions, information-retrieval system, defectiveness of materials, vessels

Abstract

The new scientific and methodical principles of algorithmization of technical state evaluation were developed; they are based on qualitative and quantitative indicators of changing the structure and material properties of composite constructions of vessels in conditions of ionizing radiation, thermocyclic stress and corrosive influence of chemically active substances. The new information-retrieval system «PROTECTIVE COATINGS DATA» for processing and systematization of data was developed

Author Biography

Юлия Алексеевна Казимиренко, National University of Shipbuilding 9 Heroi Stalingrada ave., Mykolaiv, Ukraine, 54025

PhD, Associate Professor

Department of Materials Science and Technology of Metals Dept Admiral Makarov

References

Egorov, G. V. (2007). Proektirovanie sudov ogranichennyh rajonov plavanija na osnovanii teorii riska. SPb.: Sudostroenie, 384.

Nesterenko, V. B., Zaval'njuk, O. P. (2012). Ocenka tehnicheskogo sostojanija sudovyh konstrukcij dlitel'noj jekspluatacii. Naukovij vіsnik Hersons'koi derzhavnoi mors'koi akademіi, 1 (6), 102–110.

Trjaskin, V. N., Shon, H. M. (2012). Struktura modeli dannyh v avtomatizirovannyh sistemah dlja ocenki tehnicheskogo sostojanija korpusa sudna. Vestnik AGTU. Ser. : Morskaja tehnika i tehnologija, 1, 41–45.

Petrova, N. E. (2009). Izmenenie tehnicheskogo sostojanija korpusa sudna v processe jekspluatacii. Vestnik MGTU, 12 (1), 39–41.

Bimberekov, P. A. (2011). Issledovanija na modeljah sudovyh perekrytij s povyshennym urovnem rabotosposobnosti pri mestnyh nagruzkah. Trudy Nizhegorodskogo gosudarstvennogo tehnicheskogo universiteta im. R. E. Alekseeva, 3 (90), 183–189.

Perren, A. A., Baganik, A. M. (2011). Nerazrushajushhij kontrol' polimernyh kompozitnyh materialov v sudostroenii. V mire nerazrushajushhego kontrolja, 3 (53), 24–26.

Luzin, V. P. (2000). Informacionno-tehnicheskie osnovy sozdanija sistem upravlenija krupnymi riskami v strahovoj kompanii. Moscow :BUKVICA, 146.

Klimenko, V. P., Ljahov, A. L., Gvozdik, D. N. (2011). Sovremennye osobennosti razvitija sistem komp'juternoj algebry. Matematichnі mashini і sistemi, 2, 3–16.

Francev, M. Je. (2011). Sposob proektnogo obosnovanija glavnyh jelementov i drugih harakteristik sudov iz kompozicionnyh materialov pri pomoshhi analiza baz dannyh. Vestnik AGTU: Ser.: Morskaja tehnika i tehnologija, 3, 37–46.

Moskalenko, M. A. (2005). Osnovy obespechenija konstruktivnoj bezopasnosti morskih sudov. Vladivostok: Dal'nauka, 162.

Kazymyrenko, Y. A. (2014). The formation of constructions of floating composite structures for transportation and storage of radioactive cargo. Technology audit and production reserves, 6/5 (20), 7–9. doi: 10.15587/2312-8372.2014.31884

Baryshnikov, M. V. Hudjakov A. V., Ovsjannikov V. M., Shljachkov V. I. (2010). Perevozka OJaT morskim transportom. Bezopasnost' okruzhajushhej sredy, 1, 98–105.

Kazymyrenko, Y. (2013). The regularities of the formation of metal-glass materials and coatings with enhanced X-ray properties. Technology audit and production reserves, 6/2 (14), 45–55. Available at: http://journals.uran.ua/tarp/article/view/19497/17165

Kazymyrenko, Y, A., Shlapackaja V. V. (2015). Radiacionnaja stojkost' metallostekljannyh pokrytij dlja plavuchih kompozitnyh sooruzhenij. Sudostroenie i morskaja infrastruktura, 1 (3), 111–121.

Kazymyrenko, Y, A., Farionova, T. A., Kazymyrenko, S., A., Strelkovskij, D. E. (2014). Proektnaja ocenka tehnicheskogo sostojanija sudovyh konstrukcij s ispol'zovaniem informacionno-poiskovyh sistem. Vіsnik NTU «HPІ». Serіja: Strategіchne upravlіnnja, upravlіnnja portfeljami, programami ta proektami, 3 (1046), 60–64.

Litovchenko, S. V., Malyhina, T. V., Shpagina, L. O., Shpagina, V. O. (2011). Avtomatizacija analiza metallograficheskih struktur. Vіsnik Harkіvs'kogo nacіonal'nogo unіversitetu, 960, 215–223.

Ovechkin, M. I., Serdjuk, A. I. (2013). Primenimost' programmnyh kompleksov dlja rabot so snimkami k zadacham analiza rentgenogramm. Programmnye produkty i sistemy, 2, 2149–2253.

Mazur, I. I, Shapiro, V. D. (2003). Upravlenie kachestvom: uchebnoe posobie. Moscow: Vysshaja shkola, 339.

Published

2015-08-20

Issue

Section

Technical Sciences