Determination of optimum heat treatment conditions for hardness criterion of multicomponent steel based on fuzzy mathematical simulation
DOI:
https://doi.org/10.15587/2313-8416.2016.69969Keywords:
high-strength steel, heat treatment, fuzzy clustering, artificial orthogonalizationAbstract
The mathematical simulation of high-strength cast steel grade alloyed with manganese, nickel, chromium and molybdenum, and heat treatment conditions on the steel hardness are done. The model is developed on the basis of orthogonal experimental design, in which the input variables are considered as fuzzy numbers. The optimal heat treatment conditions for steels 25ГНХМЛ, 35ГНХМЛ, 40ГНХМЛ are determined
References
Domin, D. O. (1995). Dejaki aspekty upravlinnja jakistju chavunu z plastynchastym grafitom. Kharkiv, 181.
Akimov, O. V., Anackij, Ju. P., Soloshenko, V. A. (1999). Analiz sobstvennyh kolebanij otlivki blok-kartera dizelja “SMD”. Vestnik Har'kovskogo gosudarstvennogo politehnicheskogo universiteta, 66, 40–47.
Akimov, O. V. (2003). Analysis of errors in formshaping of casts of turbo compressor turbine wheels for combustion engine supercharge at the stage of their wax models production. Eastern-European Journal of Enterprise Technologies, 3 (3), 16–24.
Ponomarenko, O. I., Trenjov, N. S. (2013). Computer modeling of crystallization processes as a reserve of improving the quality of pistons of ICE. Technology audit and production reserves, 6 (2 (14)), 36–40. Available at: http://journals.uran.ua/tarp/article/view/19529/17205
Horoshilov, O. N., Ponomarenko, O. I., Kipenskij, A. V., Nanij, V. V. (2012). Povyshenie kachestva nepreryvnolityh zagotovok iz mednyh splavov. Metallurgija mashinostroenija, 12, 29–31.
Breslavskij, D. V., Horoshilov, O. N., Ponomarenko, O. I. (2010). Upravlenie kachestvom nepreryvno lityh zagotovok. Vіsnik DDMA, 3 (20), 41–46.
Kostik, K. O. (2015). Development of the high-speed boriding technology of alloy steel. Eastern-european journal of enterprise technologies, 6 (11 (78)), 8–15. doi: 10.15587/1729-4061.2015.55015
Kostyk, K. O., Kostyk, V. O. (2014). Porivnjal'nyj analiz vplyvu gazovogo ta ionno-plazmovogo azotuvannja na zminu struktury i vlastyvostej legovanoi' stali 30H3VA. Visnyk Nacional'nogo tehnichnogo universytetu «HPI». Serija: Novi rishennja u suchasnyh tehnologijah, 48, 21–41.
Sun, Y., Chen, J., Liu, J. (2015). Effect of hydrogen on ductility of high strength quenched and tempered (QT) Cr–Ni–Mo steels. Materials Science and Engineering: A, 625, 89–97. doi: 10.1016/j.msea.2014.12.013
Kisko, A., Hamada, A. S., Talonen, J., Porter, D., Karjalainen, L. P. (2016). Effects of reversion and recrystallization on microstructure and mechanical properties of Nb-alloyed low-Ni high-Mn austenitic stainless steels. Materials Science and Engineering: A, 657, 359–370. doi: 10.1016/j.msea.2016.01.093
Mohanad, M. K., Kostyk, V., Domin, D., Kostyk, K. (2016). Modeling of the case depth and surface hardness of steel during ion nitriding. Eastern-European Journal of Enterprise Technologies, 2 (5 (80)), 45–49. doi: 10.15587/1729-4061.2016.65454
Kostyk, K. O. (2013). Zmicnennja pres-form lyttja pid tyskom po nanotehnologii'. Mashynobuduvannja, 12, 113–118.
Bidulja, P. N. (1961). Tehnologija stal'nyh otlivok. Metallurgizdat, 352.
Domin, D. A. (2013). Artificial orthogonalization in searching of optimal control of technological processes under uncertainty conditions. Eastern-European Journal of Enterprise Technologies, 5 (9 (65)), 45–53. Available at: http://journals.uran.ua/eejet/article/view/18452
Domin, D. A. (2013). Mathematical modeling in the problem of selecting opti-mal control of obtaining alloys for machine parts in un-certainty conditions. Problems of mechanical engineering, 16 (6), 15–23. Available at: http://journals.uran.ua/jme/article/view/21309/36478
Domin, D. A. (2011). Methodology of forming functional in the optimal control electric smelting. Technology audit and production reserves, 1 (1 (1)), 15–24. Available at: http://journals.uran.ua/tarp/article/view/4082/3748
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Александр Алексеевич Радченко, Юлия Николаевна Алексеенко, Виталий Иванович Чумаченко, Виктория Владимировна Богдан
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.